Otti10 Geschrieben 29. Dezember 2012 Melden Share Geschrieben 29. Dezember 2012 Hallo, vielleicht kann mir jemand helfen. Habe eine Box Kumpel. Die Box bringt laufen Standbilder und der Ton fängt an zu so alle 5 - 30 sec zu quitschen bzw. der Ton kratzt. BOX defekt ? Image 21 und mein eigenes Image schon ausprobiert. Kennt einer das Problem ? Ach ja: Die Box ist Standalone. Danke. LG Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Tunina Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 Aus meiner Sicht ist da eine Ferndignose schwierig. Ob sich über ein hier eingestelltes Bootlog ewas erkennen ließe, können ev. die Bootlog - Experten beantworten. Ich kenne das genannte Problem trotz einst über 100 umgebauter Dboxen nicht. Ich würde mal ein anderes Scartkabel testen. Ansonsten: Die Dboxen2 verlieren aufgrund der HDTV - Unfähigkeit immer mehr an Wert und kosten bei Ebay manchmal nur noch 20€. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
fun7 Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 (bearbeitet) Falls du zusätzlich noch Artefakte, komische Verpixelungen im Bild beobachtest, würde ich mal ganz schwer auf ein sehr schleches Signal (SNR) tippen, vorallem wenn es sich bei dem quietschen um sehr hohe unangenehme Töne handelt. Die Ursachen können vom schlecht abgeschrimten oder kaputten Antennenkabel bis zum defekten Tuner reichen. Schau dir mal im Neutrino Menü, rote Taste > technische Informationen, die Tunerwerte (SIG, SNR, BER) an und poste sie mal hier. bearbeitet 30. Dezember 2012 von fun7 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 30. Dezember 2012 Autor Melden Share Geschrieben 30. Dezember 2012 Naja, poste sie gerne, aber daran dürfte es nicht liegen. Habe ja eine dbox am gleichen Kabel und diese nur abgehängt und die andere dran. Meine eigene läuft tadellos mit dem keywelt-image (nochmal danke hierfür). Nur die Box meines Kumpels will nicht. Habe das neueste sowie das Backup meiner eigenen Box drauf gespielt. Das Problem bleibt. Schön bescheiden, obwohl meine Kumpel behauptet, dass sie bei ihm normal lief, bevor er anfing ein Neutrino-Image drauf zu spielen und das bei ihm schief ging. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 Hi, na dann ist ja alles gut ?!? Was für ne Box, Nokia oder Sagem? Sat oder Kabel (schon traurig, das wir nichtmal das wissen ) ? Bei allen Sendern, oder nur bei Verschlüsselten? Trotzdem mal die Empfangswerte posten, insbesondere den BER. Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 30. Dezember 2012 Autor Melden Share Geschrieben 30. Dezember 2012 (bearbeitet) Also: Nokia DBOX2 Sat Hat einen Moment gedauert. Habe einige Vergleiche gemacht. Meine funktionierende Box hat folgende Werte: SNR: 60138 max SNR: 58138 min SIG: 57054 min und max BIT: 8555 max BIT: 6560 min Die, bei der ich das Standbild mit quitschenden Tönen habe: SNR: 61166 max SNR: 60395 min SIG: 60653 min und max BIT: 4730 max BIT 2033 min bearbeitet 30. Dezember 2012 von Otti10 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 Hi, insbesondere den BER.??? Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 30. Dezember 2012 Autor Melden Share Geschrieben 30. Dezember 2012 Da steht überall 0 (Null) bei beiden Boxen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 Hi, ok, das ist ja ideal, also am Empfang dürfte es nicht liegen... Bei allen Sendern, oder nur bei Verschlüsselten? Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 30. Dezember 2012 Autor Melden Share Geschrieben 30. Dezember 2012 Ich nutze die Dbox nicht für verschlüsselte Sender. Also nur für free-tv Programme. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 Hi, also dann vllt doch mal ein Bootlog. Betrifft es nur den Ton, also das Bild ist einwandfrei? Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 30. Dezember 2012 Autor Melden Share Geschrieben 30. Dezember 2012 (bearbeitet) Erstmal danke. Kurz und dumm gefragt: In welchem Verzeichnis finde ich das boot.log ? Das hatte ich aber geschrieben ;-) Standbilder. LG bearbeitet 30. Dezember 2012 von Otti10 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 30. Dezember 2012 Melden Share Geschrieben 30. Dezember 2012 Hi, http://faq.keywelt-board.com/index.php?action=artikel&cat=3&id=5&artlang=de Ciao, DdD. PS: Ok, überlesen Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 31. Dezember 2012 Autor Melden Share Geschrieben 31. Dezember 2012 Anbei nun das Bootlog ohne eingestecktes Sat-Kabel. [ 15:47:54 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:54 ] [ Dbox ] Opening device /dev/tts/1 [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [ 15:47:55 ] [ Loader ] Reset failed ... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...[ 15:47:55 ] [ Loader ] Reader ty pe 4 on node /dev/tts/1 [ 15:47:55 ] [ Dbox ] Opening device /dev/tts/1 OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [ 15:47:56 ] [ Loader ] Reset failed ... [ 15:47:56 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:56 ] [ Dbox ] Opening device /dev/tts/1 /dev/input/event1: No such file or directory [ 15:47:57 ] [ Loader ] Reset failed ... [neutrino] menue setup [ 15:47:57 ] [ Loader ] Reader type 4 on node /dev/tts/1 [neutrino] found esound, adding to mainmenue/personalize [ 15:47:57 ] [ Dbox ] Opening device /dev/tts/1 [neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [ 15:47:58 ] [ Loader ] Reset failed ... [ 15:47:58 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:58 ] [ Dbox ] Opening device /dev/tts/1 [neutrino] received 32 sats [neutrino] registering as event client [ 15:47:59 ] [ Loader ] Reset failed ... [ 15:47:59 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:59 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:00 ] [ Loader ] Reset failed ... [ 15:48:00 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:00 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:01 ] [ Loader ] Reset failed ... [ 15:48:01 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:01 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:02 ] [ Loader ] Reset failed ... [ 15:48:02 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:02 ] [ Dbox ] Opening device /dev/tts/1 [LCDFONT] FTC_Face_Requester (Fix15/Bold) [ 15:48:03 ] [ Loader ] Reset failed ... [ 15:48:03 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:03 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:04 ] [ Loader ] Reset failed ... [ 15:48:04 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:04 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:05 ] [ Loader ] Reset failed ... [ 15:48:05 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:05 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:06 ] [ Loader ] Reset failed ... [ 15:48:06 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:06 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:07 ] [ Loader ] Reset failed ... [ 15:48:07 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:07 ] [ Dbox ] Opening device /dev/tts/1 [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [ 15:48:08 ] [ Loader ] Reset failed ... [ 15:48:08 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:08 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:09 ] [ Loader ] Reset failed ... [ 15:48:09 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:09 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:10 ] [ Loader ] Reset failed ... [basicsocket] receive timed out. waiting process 406 [ 15:48:10 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:10 ] [ Dbox ] Opening device /dev/tts/1 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything busy /tmp/zapit.sock zap failed! [ 15:48:11 ] [ Loader ] Reset failed ... [ 15:48:11 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:11 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:12 ] [ Loader ] Reset failed ... [ 15:48:12 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:12 ] [ Dbox ] Opening device /dev/tts/1 [basicsocket] send_data: Broken pipe (n = 8/8, pid = 266) [ 15:48:13 ] [ Loader ] Reset failed ... [ 15:48:13 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:13 ] [ Dbox ] Opening device /dev/tts/1 [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [ 15:48:14 ] [ Loader ] Reset failed ... [ 15:48:14 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:14 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:15 ] [ Loader ] Reset failed ... [ 15:48:15 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:15 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:16 ] [ Loader ] Reset failed ... [ 15:48:16 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:16 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:17 ] [ Loader ] Reset failed ... [ 15:48:17 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:17 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:18 ] [ Loader ] Reset failed ... [ 15:48:18 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:18 ] [ Dbox ] Opening device /dev/tts/1 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
fun7 Geschrieben 31. Dezember 2012 Melden Share Geschrieben 31. Dezember 2012 Hmm leider nicht sehr aussagekräftig, mach mal einen seriellen Bootlog. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 1. Januar 2013 Autor Melden Share Geschrieben 1. Januar 2013 (bearbeitet) Ja, mir ist wohl der Anfang "weggelaufen". Jetzt nochmal und mit angeschlossenem SAT-Kabel. Schon mal danke für Eure Hilfe. debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-48.3c.80.07.00.00-ef debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 163284 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (May 23 2009 - 13:09:58) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 670534 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 670470 Bytes = 654.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37-dbox2 (image@Server) (gcc version 3.4.6) #14 Sa Mai 23 13:1 0:47 CEST 2009 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfst ype=squashfs Decrementer Frequency = 251625000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2580) Console: colour dummy device 80x25 Calibrating delay loop... 66.76 BogoMIPS Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:fb:11 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2009-05-23 13:18:33 CEST) mount: using /etc/fstab ##### Image-Version: Keywelt_Mai2009_V1 ##### Sat May 23 13:47:00 UTC 2009 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_av: AVIA500 sptsfix is on avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1893)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ DBox2 Multicam Driver v1.01 skars & doz21 Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.292 2009/05/ 05 18:57:39 rhabarber1848 Exp $ [sectionsd] Caching max 1500 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.429k 2009/05/12 18:25:00 seife & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 insmod: warning: kernel-module version mismatch /var/modules/camd-cardserver.o was compiled for kernel version 2.4.22-db ox2 while this kernel is version 2.4.37-dbox2 [camd-cardserver.o] compiled Jan 23 2004, 16:38:42 [camd-cardserver.o] ioport base = ff000950 [camd-cardserver.o] commproc base = ff0009c0 starte newcs This is NewCS 1.65 - the New CardServer by the Butter-team.. Compiled on Jan 19 2009 at 17:54:45 Reading Config file from /var/tuxbox/config/newcs.xml TCP-log password is disabled! level: normal type: init output: console,tcp logger config: level 1 type 3 output 5 Console log options: level 1 type 3 TCP log options: level 1 type 3 [ 15:47:24 ] [ Box detect ] Box type 4 (Dbox2) [ 15:47:24 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de faulting to NO [ 15:47:24 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp ing... [ 15:47:24 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip ping... [ 15:47:24 ] [ Config ] Pincode for device 0 (Multicam): 0000 [ 15:47:24 ] [ Config ] /dev/tts/1 ECM priority: round [ 15:47:25 ] [ Config ] Option <spider> not present for User: newcs, defaulting to NO [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 [ 15:47:25 ] [ EMM Cache ] Initialising dynamic Cache [ 15:47:25 ] [ ECM Cache ] Initialising dynamic Cache [ NewCS ] Process ID is: 261 [ 15:47:25 ] [ Loader ] Starting Telnet on port 1001 [ 15:47:25 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:25 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:27 ] [ Loader ] Reset failed ... [ 15:47:27 ] [ Loader ] Starting Newcamd Server on port 10000 [ 15:47:27 ] [ NewCS ] Ready to GO! [ 15:47:27 ] [ Newcamd ] Newcamd thread Server started on port 10000 newcamd: main loop [ 15:47:27 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:27 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:28 ] [ Loader ] Reset failed ... [ 15:47:28 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:28 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:29 ] [ Loader ] Reset failed ... [ 15:47:29 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:29 ] [ Dbox ] Opening device /dev/tts/1 /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) [ 15:47:30 ] [ Loader ] Reset failed ... [ 15:47:30 ] [ Loader ] Reader type 4 on node /dev/tts/1 [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [ 15:47:30 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:31 ] [ Loader ] Reset failed ... [ 15:47:31 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:31 ] [ Dbox ] Opening device /dev/tts/1 [CVideo::setVideoFormat] output format: 4:3(LB) [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [ 15:47:32 ] [ Loader ] Reset failed ... [LCDFONT] initializing core...[ 15:47:32 ] [ Loader ] Reader type 4 on node /dev /tts/1 [ 15:47:32 ] [ Dbox ] Opening device /dev/tts/1 [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [ 15:47:34 ] [ Loader ] Reset failed ... [ 15:47:34 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:34 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:35 ] [ Loader ] Reset failed ... [ 15:47:35 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:35 ] [ Dbox ] Opening device /dev/tts/1 /var/plugins/operations camd_start [ 15:47:36 ] [ Loader ] Reset failed ... [ 15:47:36 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:36 ] [ Dbox ] Opening device /dev/tts/1 starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] CA_SEND_MSG: Remote I/O error [ 15:47:37 ] [ Loader ] Reset failed ... [camd] CA_SEND_MSG: Remote I/O error [ 15:47:37 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:37 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:38 ] [ Loader ] Reset failed ... [ 15:47:38 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:38 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:39 ] [ Loader ] Reset failed ... [ 15:47:39 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:39 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:40 ] [ Loader ] Reset failed ... [ 15:47:40 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:40 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:41 ] [ Loader ] Reset failed ... [ 15:47:41 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:41 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:42 ] [ Loader ] Reset failed ... [ 15:47:42 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:42 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:43 ] [ Loader ] Reset failed ... [ 15:47:43 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:43 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:44 ] [ Loader ] Reset failed ... [ 15:47:44 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:44 ] [ Dbox ] Opening device /dev/tts/1 [yhttpd] Webserver starting... [ 15:47:45 ] [ Loader ] Reset failed ... /var/plugins/operations sect_renice [ 15:47:45 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:45 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:46 ] [ Loader ] Reset failed ... [ 15:47:46 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:46 ] [ Dbox ] Opening device /dev/tts/1 avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1893)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ DBox2 Multicam Driver v1.01 skars & doz21 Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.292 2009/05/ 05 18:57:39 rhabarber1848 Exp $ [sectionsd] Caching max 1500 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.429k 2009/05/12 18:25:00 seife & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 insmod: warning: kernel-module version mismatch /var/modules/camd-cardserver.o was compiled for kernel version 2.4.22-db ox2 while this kernel is version 2.4.37-dbox2 [camd-cardserver.o] compiled Jan 23 2004, 16:38:42 [camd-cardserver.o] ioport base = ff000950 [camd-cardserver.o] commproc base = ff0009c0 starte newcs This is NewCS 1.65 - the New CardServer by the Butter-team.. Compiled on Jan 19 2009 at 17:54:45 Reading Config file from /var/tuxbox/config/newcs.xml TCP-log password is disabled! level: normal type: init output: console,tcp logger config: level 1 type 3 output 5 Console log options: level 1 type 3 TCP log options: level 1 type 3 [ 15:47:24 ] [ Box detect ] Box type 4 (Dbox2) [ 15:47:24 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de faulting to NO [ 15:47:24 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp ing... [ 15:47:24 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip ping... [ 15:47:24 ] [ Config ] Pincode for device 0 (Multicam): 0000 [ 15:47:24 ] [ Config ] /dev/tts/1 ECM priority: round [ 15:47:25 ] [ Config ] Option <spider> not present for User: newcs, defaulting to NO [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 [ 15:47:25 ] [ EMM Cache ] Initialising dynamic Cache [ 15:47:25 ] [ ECM Cache ] Initialising dynamic Cache [ NewCS ] Process ID is: 261 [ 15:47:25 ] [ Loader ] Starting Telnet on port 1001 [ 15:47:25 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:25 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:27 ] [ Loader ] Reset failed ... [ 15:47:27 ] [ Loader ] Starting Newcamd Server on port 10000 [ 15:47:27 ] [ NewCS ] Ready to GO! [ 15:47:27 ] [ Newcamd ] Newcamd thread Server started on port 10000 newcamd: main loop [ 15:47:27 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:27 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:28 ] [ Loader ] Reset failed ... [ 15:47:28 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:28 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:29 ] [ Loader ] Reset failed ... [ 15:47:29 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:29 ] [ Dbox ] Opening device /dev/tts/1 /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) [ 15:47:30 ] [ Loader ] Reset failed ... [ 15:47:30 ] [ Loader ] Reader type 4 on node /dev/tts/1 [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [ 15:47:30 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:31 ] [ Loader ] Reset failed ... [ 15:47:31 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:31 ] [ Dbox ] Opening device /dev/tts/1 [CVideo::setVideoFormat] output format: 4:3(LB) [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [ 15:47:32 ] [ Loader ] Reset failed ... [LCDFONT] initializing core...[ 15:47:32 ] [ Loader ] Reader type 4 on node /dev /tts/1 [ 15:47:32 ] [ Dbox ] Opening device /dev/tts/1 [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [ 15:47:34 ] [ Loader ] Reset failed ... [ 15:47:34 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:34 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:35 ] [ Loader ] Reset failed ... [ 15:47:35 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:35 ] [ Dbox ] Opening device /dev/tts/1 /var/plugins/operations camd_start [ 15:47:36 ] [ Loader ] Reset failed ... [ 15:47:36 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:36 ] [ Dbox ] Opening device /dev/tts/1 starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] CA_SEND_MSG: Remote I/O error [ 15:47:37 ] [ Loader ] Reset failed ... [camd] CA_SEND_MSG: Remote I/O error [ 15:47:37 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:37 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:38 ] [ Loader ] Reset failed ... [ 15:47:38 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:38 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:39 ] [ Loader ] Reset failed ... [ 15:47:39 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:39 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:40 ] [ Loader ] Reset failed ... [ 15:47:40 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:40 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:41 ] [ Loader ] Reset failed ... [ 15:47:41 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:41 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:42 ] [ Loader ] Reset failed ... [ 15:47:42 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:42 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:43 ] [ Loader ] Reset failed ... [ 15:47:43 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:43 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:44 ] [ Loader ] Reset failed ... [ 15:47:44 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:44 ] [ Dbox ] Opening device /dev/tts/1 [yhttpd] Webserver starting... [ 15:47:45 ] [ Loader ] Reset failed ... /var/plugins/operations sect_renice [ 15:47:45 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:45 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:46 ] [ Loader ] Reset failed ... [ 15:47:46 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:46 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:47 ] [ Loader ] Reset failed ... [ 15:47:47 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:47 ] [ Dbox ] Opening device /dev/tts/1 [sectionsd] getUTC: read: Connection timed out [ 15:47:48 ] [ Loader ] Reset failed ... [ 15:47:48 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:48 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:49 ] [ Loader ] Reset failed ... [ 15:47:49 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:49 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:50 ] [ Loader ] Reset failed ... [ 15:47:50 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:50 ] [ Dbox ] Opening device /dev/tts/1 neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [ 15:47:51 ] [ Loader ] Reset failed ... [ 15:47:51 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:51 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:52 ] [ Loader ] Reset failed ... [ 15:47:52 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:53 ] [ Dbox ] Opening device /dev/tts/1 [ 15:47:53 ] [ Loader ] Reset failed ... [ 15:47:53 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:54 ] [ Dbox ] Opening device /dev/tts/1 starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [ 15:47:54 ] [ Loader ] Reset failed ... [ 15:47:54 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:55 ] [ Dbox ] Opening device /dev/tts/1 [lcdd] time-skin not found -> using default... [ 15:47:55 ] [ Loader ] Reset failed ... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [ 15:47:55 ] [ Loader ] Reader type 4 on node /dev/tts/1 [lcdd] month-skin not found -> using default... [ 15:47:56 ] [ Dbox ] Opening device /dev/tts/1 [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [ 15:47:56 ] [ Loader ] Reset failed ... [ 15:47:57 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:57 ] [ Dbox ] Opening device /dev/tts/1 /dev/input/event1: No such file or directory [ 15:47:57 ] [ Loader ] Reset failed ... [ 15:47:58 ] [ Loader ] Reader type 4 on node /dev/tts/1 [neutrino] menue setup [ 15:47:58 ] [ Dbox ] Opening device /dev/tts/1 [neutrino] found esound, adding to mainmenue/personalize [neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [ 15:47:58 ] [ Loader ] Reset failed ... [ 15:47:59 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:47:59 ] [ Dbox ] Opening device /dev/tts/1 [neutrino] received 32 sats [ 15:47:59 ] [ Loader ] Reset failed ... [neutrino] registering as event client [ 15:48:00 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:00 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:00 ] [ Loader ] Reset failed ... [ 15:48:01 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:01 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:01 ] [ Loader ] Reset failed ... [ 15:48:02 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:02 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:02 ] [ Loader ] Reset failed ... [ 15:48:03 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:03 ] [ Dbox ] Opening device /dev/tts/1 [LCDFONT] FTC_Face_Requester (Fix15/Bold) [ 15:48:03 ] [ Loader ] Reset failed ... [ 15:48:04 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:04 ] [ Dbox ] Opening device /dev/tts/1 [ 15:48:04 ] [ Loader ] Reset failed ... [ 15:48:05 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:05 ] [ Dbox ] Opening device /dev/tts/1 avia_gt_core: masking unhandled irq reg 0 bit 6 avia_gt_core: masking unhandled irq reg 0 bit 7 [ 15:48:05 ] [ Loader ] Reset failed ... [ 15:48:06 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 15:48:06 ] [ Dbox ] Opening device /dev/tts/1 PES, queue 0 normal. avia_gt_core: masking unhandled irq reg 1 bit 15 [camd] CA_SEND_MSG: Remote I/O error [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything [timeThread] - 01.01.2013 14:19:04, tim: Tue Jan 1 14:19:04 2013 [timeThread] Time set via DVB, going to sleep for 1800 seconds. [ 15:48:06 ] [ Loader ] Reset failed ... [ 15:48:07 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:04 ] [ Dbox ] Opening device /dev/tts/1 [controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9) 14:19:04.674 dmxSDT: going to sleep... 14:19:04.748 dmxCN: going to sleep... 14:19:04.749 [LCDFONT] FTC_Face_Requester (Fix12/Regular) eit_set_update_filter, servicekey = 0x44d00016dca, current version 30 [ 14:19:04 ] [ Loader ] Reset failed ... [ 14:19:05 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:05 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:05 ] [ Loader ] Reset failed ... [ 14:19:05 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:06 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:06 ] [ Loader ] Reset failed ... [ 14:19:06 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:07 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:07 ] [ Loader ] Reset failed ... [ 14:19:07 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:08 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:08 ] [ Loader ] Reset failed ... [ 14:19:08 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:09 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:09 ] [ Loader ] Reset failed ... [ 14:19:09 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:10 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:10 ] [ Loader ] Reset failed ... [ 14:19:10 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:11 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:11 ] [ Loader ] Reset failed ... [ 14:19:11 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:12 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:12 ] [ Loader ] Reset failed ... [ 14:19:12 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:13 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:13 ] [ Loader ] Reset failed ... [ 14:19:13 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:14 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:14 ] [ Loader ] Reset failed ... [ 14:19:14 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:15 ] [ Dbox ] Opening device /dev/tts/1 [ 14:19:15 ] [ Loader ] Reset failed ... [ 14:19:15 ] [ Loader ] Reader type 4 on node /dev/tts/1 [ 14:19:16 ] [ Dbox ] Opening device /dev/tts/1 bearbeitet 1. Januar 2013 von merkwuerden Logfiles sind in Spoiler-Tags zu setzen Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 1. Januar 2013 Melden Share Geschrieben 1. Januar 2013 Flashe als erstes ein jungfräuliches, nicht verpfuschtes Image (z.B. das November 2012 aus dem Download-Bereich, 2xI-Version) ohne kaputt konfigurierte Cams und anderen Firlefanz, dann sehen wir weiter. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 1. Januar 2013 Autor Melden Share Geschrieben 1. Januar 2013 (bearbeitet) @ merkwuerden: Leider weiß ich nicht, wie man einen Log in einen solchen Spoiler-Tag setzt. Wäre Dir nochmal dankbar, wenn Du das für mich übernehmen könntest. Habe jetzt das neueste Image geflasht. Fehler ist aber der Gleiche. debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 166864 verify sig: 262 Branching to 0x40100 U-Boot 2012.04 (Tuxbox) (Nov 08 2012 - 15:10:51) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MiB Flash: 8 MiB Scanning JFFS2 FS: .... done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC LCD: ready Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ............................................................... done Un-Protected 63 sectors ### FS (squashfs) loading 'vmlinuz' to 0x200000 ### FS load complete: 661778 bytes loaded to 0x200000 ## Booting kernel from Legacy Image at 00200000 ... Image Name: Linux-2.4.37.11-dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 661714 Bytes = 646.2 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37.11-dbox2 (image@server) (gcc version 4.1.2) #2 Do 8. Nov 15 :11:54 CET 2012 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex= Decrementer Frequency = 251625000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2580) Console: colour dummy device 80x25 Calibrating delay loop... 66.76 BogoMIPS Memory: 30848k available (1124k kernel code, 336k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:fb:11 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005c0000 : "root (squashfs+lzma)" 0x005c0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.18.5 (2012-11-08 15:17:55 CET) starting pid 8, tty '': '/etc/init.d/sysinit' mount: using /etc/fstab starting pid 23, tty '': '/etc/init.d/rcS' Please press Enter to activate this console. ##### Image-Version: Keywelt_Nov2012_V1.00 ##### Sat Jan 1 00:00:00 UTC 2000 tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray Detected STB: Vendor: Nokia Model: D-BOX2 (2 flash chips) event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface $Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av: AVIA 600L found. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.216 2012/03/07 18:31:52 rhabarber1848 Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $ wget: can't connect to remote host (127.0.0.1): Connection refused ves1x93: Detected ves1893a rev2 DVB: registering frontend 0:0 (VES1893)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $ insmod: warning: kernel-module version mismatch multicam was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.11-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 * starting /var/etc/init.d/S10rtc ... * starting /var/etc/init.d/S12squashedit ... * starting /var/etc/init.d/S15syslogd ... * starting /var/etc/init.d/S16kb2rcd ... * starting /var/etc/init.d/S16lircd ... * starting /var/etc/init.d/S18openntpd ... * starting /var/etc/init.d/S30autofs ... * starting /var/etc/init.d/S30cron ... * starting /var/etc/init.d/S30dropbear ... * starting /var/etc/init.d/S30inadyn ... * starting /var/etc/init.d/S31nfsserver ... * starting /var/etc/init.d/S31sambaserver ... * starting /var/etc/init.d/S39lanswap ... * starting /var/etc/init.d/S40tuxcald ... * starting /var/etc/init.d/S40tuxmaild ... * starting /var/etc/init.d/S99gui ... $Id: sectionsd.cpp,v 1.344 2012/09/23 08:25:00 rhabarber1848 Exp $ [sectionsd] FreeSat enabled [sectionsd] Caching max 3000 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.463 2012/08/14 18:24:12 Markham & Worschter & SnowHead Exp $ [zapit] PMT update enabled [zapit] Load ScanSetup Setting: 0 0.000000 0.000000 1 1 8 [frontend] uncommitted_switch_mode 0 auto_fec 0 /var/plugins/operations camd_start starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 1 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 4:3(LB) /var/plugins/operations sect_renice neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) neutrino: /lib/libpng12.so.0: no version information available (required by /lib /liblcddisplay.so.0) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/SemiCondensed) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron [rcinput] no file /var/tuxbox/config/rc.conf was found /dev/input/event1: No such file or directory [network config] Instance created [neutrino] menue setup [neutrino] init menus... [neutrino] GUI-Personalize instance created... [neutrino] found esound, adding personalized esound entry to mainmenue [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [neutrino] registering as event client [scan-setup] received 27 sats [sectionsd] getUTC: read: Connection timed out [LCDFONT] FTC_Face_Requester (Fix15/Bold) avia_gt_core: masking unhandled irq reg 0 bit 6 avia_gt_core: masking unhandled irq reg 0 bit 7 PES, queue 0 normal. avia_gt_core: masking unhandled irq reg 1 bit 15 [camd] CA_SEND_MSG: Remote I/O error [camd] The stupid CAM refuses to descramble more than 4 elementary streams per s ervice. The application I am communicating with should select less PIDs at once. [pmt] set update filter, sid 0x6d66 pid 0x64 version 5 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything [controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9) 01:01:00.010 [timeThread] - 01.01.2000 01:01:00, tim: Tue Jan 1 18:24:59 2013 [neutrino] timeset event. difference is 410376239 s, stepping... 01:01:00.068 [timeThread] Time set via DVB(TDT), going to sleep for 5 seconds. 18:24:59.976 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[0] f ilter 0x4e mask 0xff 18:24:59.979 dmxSDT: going to sleep... [timerd] using config file /var/tuxbox/config/timerd.conf 18:25:02.514 eit_set_update_filter, servicekey = 0x43700016d66, current version 0x2 got events 3 /bin/nhttpd: /lib/libpng12.so.0: no version information available (required by / lib/liblcddisplay.so.0) [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... 18:25:06.920 getUTC(TOT): len=13 cc=DEU reg_id=0 pol=0 offs=0100 new=0200 when=S un Mar 31 01:00:00 2013 18:25:06.981 [timeThread] - 01.01.2013 18:25:06, tim: Tue Jan 1 18:25:07 2013 [neutrino] timeset event. difference is 0 s, nothing to do... 18:25:07.099 [timeThread] Time set via DVB(TOT), going to sleep for 1800 seconds . 18:25:11.137 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[1] f ilter 0x50 mask 0xf0 [yhttpd] Webserver starting... bearbeitet 1. Januar 2013 von merkwuerden Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 1. Januar 2013 Melden Share Geschrieben 1. Januar 2013 Spoiler erstellst Du, indem Du entweder im Editor links neben Schriftart "spezielle BBCodes" anklickst und dort "Spoiler" auswählst. Oder direkt händisch im Editor: [spoiler] text blablabla [/spoiler] In Deinem Log ist soweit nichts Auffälliges zu sehen. Bis auf eine Sache: [camd] CA_SEND_MSG: Remote I/O error Diese Meldung darf nicht auftreten. Sie ist ein ziemlich sicheres Indiz für defekten SEC oder dessen RAM. Und das beeinflusst nicht nur verschlüsselte Sender, davon sind genau so auch unverschlüsselte Sender betroffen, weil der SEC auch in deren Signalweg liegt. Was dann dazu führt, das z.B. auch ARD oder ZDF Bildhänger, Tonprobleme und dergleichen haben können oder auch gleich ganz stecken bleiben. Genaueres kann Dir nur eine Werkstatt sagen, was der Box fehlt (wobei sich das kaum lohnen dürfte). Am Log selbst ist nicht mehr zu erkennen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Otti10 Geschrieben 1. Januar 2013 Autor Melden Share Geschrieben 1. Januar 2013 Ich danke Dir mein Lieber für die Info. Habe mir fast gedacht, dass ein Hardwaredefekt vorliegt. Denn mein 1. gepostetes Image mit den defekten Cams läuft auf meiner eigenen dbox 100% gut. Die Cams nutze ich ja in diesem Sinne nicht mehr. Vielen vielen Dank. Super Board hier. Bin schon ein wenig raus und musste deshalb auch nochmal richtige Fachmänner fragen. Bin nicht mehr so tief drin. ;-) LG Otti Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge