Jump to content

Direktes Streamen -bricht immer ab

Maan

Von Maan
in Streaming

Empfohlene Beiträge

Maan

Maan

Geschrieben
Geschrieben

Wenn ich etwas direkt per NFS aufnehmen will bricht die Aufnahme immer nach ca 7 Sek ab mit der Meldung: "..., weil ein Fehler beim Schreiben der Daten auftrat"

 

Meine Einstellungen:

DBOX:

ip 192.168.0.23

 

Mounteinstellungen:

typ nfs

server ip 192.168.0.1

verzeichniss/freigabe aufnahme

lokales verzeichniss /mnt/record

beim start mounten ja

mount-optionen rw,soft,udp

mount optionen nolock,rsize=8192,wsize=8192

 

 

PC:

IP 192.168.0.1

 

der aufnahmeordner:

permissions sind root access allowed und read-write

 

Das NFS funktioniert soweit denke ich gut.

Ich kann beispielsweise MP3´s darüber hören.

Auch bei den Log´s von SFU ist alles in Ordnung.

Selbst beim aufnehmen werden keine Fehler gemeldet.

 

Allerdings bricht die Aufnahme nach kurzer Zeit ab.

Die Datei, die ich dann auf dem PC finde, ist meistens dann so ca. 1-2 MB groß,

lässt sich aber nicht abspielen.

 

Was ist denn da falsch

Link zu diesem Kommentar
Auf anderen Seiten teilen
  • Antworten 58
  • Created
  • Letzte Antwort
Maan

Maan

Geschrieben
  • Autor
Geschrieben

ist das das richtige ??? :

 

BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23
debug: Sending TFTP-request for file c/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
 CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
 Board: ### No HW ID - assuming TQM8xxL
 DRAM:  (faked) 32 MB
 Ethernet: 00-50-9c-31-7d-d0
 FLASH:  8 MB
 LCD driver (KS0713) initialized
 No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'c/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
 LCD logo at: 0x130000 (0x1FD2864 bytes)
 No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'c/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
done
 FB logo at: 0x0 (0x1FC0000 bytes)
 AVIA Frambuffer
 Input:  serial
 Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot:  0 
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'c/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
done
## Booting Linux kernel at 00100000 ...
  Image Name:   dbox2
  Image Type:   PowerPC Linux Kernel Image (gzip compressed)
  Data Size:    600241 Bytes = 586 kB = 0 MB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:c/dbox2/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.1:c/dbox2/
cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:31:7d:d0
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.23
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/2 on 192.168.0.1
Root-NFS: Server returned error -13 while mounting c/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..

Link zu diesem Kommentar
Auf anderen Seiten teilen
merkwuerden

merkwuerden

Geschrieben
Geschrieben

Genau so ein Logfile.

 

Allerdings nehme ich an, daß Du aus dem Flash booten willst, nicht über Netzwerk (oder doch?).

 

Zum Booten aus dem Flash beim Bootmanager unter Settings den BootP/TFTP-Server und NFS-Server ausschalten (Haken raus), COM-Port allein reicht.

 

Laß beim Booten das Log mitlaufen und starte mal eine Direktaufnahme und warte, bis sie abbricht. Das Log postest Du dann mal, dann schaun mer mal, was da drin auftaucht.

Link zu diesem Kommentar
Auf anderen Seiten teilen
Maan

Maan

Geschrieben
  • Autor
Geschrieben

So hier ist der Log (vom anfang fehlt bisschen was):

die aufnahme beginnt im zweiten teil des codes

 

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/mavia_av_core: Starting avia_gt_wdt thread.
isc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/at76c651.o
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1993)...
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970
/var/plugins/operations logcs_init
rdate: time.fu-berlin.de: Host name lookup failure
$Id: sectionsd.cpp,v 1.217 2006/02/08 21:15:50 houdini Exp $
caching 50 hours
events are old 120min after their end time
minutes between timeset 30
/var/plugins/operations camd_init
$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
Using /var/modules/multicam.o
insmod: Warning: kernel-module version mismatch
      /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2
      while this kernel is version 2.4.31-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte camd37xx
/var/plugins/operations check_camd3_socket
<14>01.01.1970 01:00:11 camd3: BOXTYPE:  1
<14>01.01.1970 01:00:11 camd3: LOG:  6
<14>01.01.1970 01:00:11 camd3: UDP_PORT:  20248
<14>01.01.1970 01:00:11 camd3: original slot au on
<14>01.01.1970 01:00:11 camd3: HTTP_PORT:  9080
<14>01.01.1970 01:00:12 camd3: LOG_HOST:  127.0.0.1:514
<14>01.01.1970 01:00:12 camd3: DNS_CACHE:  600 sec
<14>01.01.1970 01:00:12 camd3: SOCKET:  /tmp/camd.sock01
<14>01.01.1970 01:00:12 camd3: KEYS:    /var/keys/camd3.keys
<14>01.01.1970 01:00:12 camd3: SERVERS:   /var/keys/camd3.servers
<14>01.01.1970 01:00:12 camd3: USERS:   /var/keys/camd3.users
<14>01.01.1970 01:00:12 camd3: Slot /dev/tts/1: initialisiere...
<14>01.01.1970 01:00:13 camd3: Slot /dev/tts/1: starte Monitor...
<14>01.01.1970 01:00:13 camd3: Slot /dev/tts/1: bereit
<14>01.01.1970 01:00:13 camd3: original slot: CAID=1702

<14>01.01.1970 01:00:13 camd3: KeyDB: gestartet
<14>01.01.1970 01:00:13 camd3: camd v3.838a - erfolgreich gestartet
<14>01.01.1970 01:00:13 camd3: HTTP: started on port 9080
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 457 onid 1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
/var/plugins/operations sect_renice
[LCDFONT] initializing core.../var/plugins/operations epg_reinit

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
starte epg_watchdog
dbox2 watchdog v0.81 by bsdice
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[sectionsd] getUTC: read: Connection timed out
[basicsocket] send_data: Resource temporarily unavailable
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.0.1:aufnahme -> /mnt/record
[CFSMounter] Mount(0) 192.168.0.1:Musik -> /mnt/mp3
[CFSMounter] Mount(0) 192.168.0.1:Filme -> /mnt/filme
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] menue setup
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] received 33 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[CBasicClient] connect failed: /tmp/camd.socket
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
/tmp/camd.sock02: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 27.03.2006 17:34:54, tim: Mon Mar 27 17:34:54 2006
[LCDFONT] FTC_Face_Requester (Fix12/Regular)

//BEGINN DER AUFNAHME

[neutrino.cpp] executing /var/tuxbox/config/recording.start.
no response from sectionsd
PCR discontinuity: PCR: 0x04B683679, OLDPCR: 0x04B677658, Diff: 49185
Record channel_id: 44100012ef4 epg: 0, apids  mode 1
SPTS, queue 0 extended.
no response from sectionsd
PANIC: not enough space in ringbuffer, available 55471, needed 80641
nfs: server 192.168.0.1 not responding, timed out
344: old priority 0, new priority -15
362: old priority 0, new priority -15
363: old priority 0, new priority -15
374: old priority 0, new priority -15
388: old priority 0, new priority -15
389: old priority 0, new priority -15
[stream2file]: error in write: Input/output error
[stream2file] pthreads exit code: 4294967293
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
killall: epg_watchdog: no process killed
Record channel_id: 44100012ef4 epg: 0, apids  mode 1
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: error in write: Input/output error
killall: sectionsd: no process killed
344: old priority -15, new priority -15
362: old priority -15, new priority -15
363: old priority -15, new priority -15
374: old priority -15, new priority -15
415: old priority -15, new priority -15
417: old priority -15, new priority -15
418: old priority -15, new priority -15
nfs: server 192.168.0.1 not responding, timed out
nfs: server 192.168.0.1 not responding, timed out
[stream2file] pthreads exit code: 4294967293
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
killall: epg_watchdog: no process killed
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
Record channel_id: 44100012ef4 epg: 0, apids  mode 1
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
PANIC: not enough space in ringbuffer, available 53255, needed 82857
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
nfs: server 192.168.0.1 not responding, timed out
killall: sectionsd: no process killed
344: old priority -15, new priority -15
362: old priority -15, new priority -15
363: old priority -15, new priority -15
374: old priority -15, new priority -15
449: old priority -15, new priority -15
450: old priority -15, new priority -15
451: old priority -15, new priority -15
452: old priority -15, new priority -15
453: old priority -15, new priority -15
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: error in write: Input/output error
nfs: server 192.168.0.1 not responding, timed out
nfs: server 192.168.0.1 not responding, timed out
[stream2file] pthreads exit code: 4294967293
[stream2file]: timeout reading from demux
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
killall: epg_watchdog: no process killed
Record channel_id: 44100012ef4 epg: 0, apids  mode 1
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
Stop
PES, queue 0 normal.
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
nfs: server 192.168.0.1 not responding, timed out
killall: sectionsd: no process killed
344: old priority -15, new priority -15
362: old priority -15, new priority -15
363: old priority -15, new priority -15
374: old priority -15, new priority -15
481: old priority -15, new priority -15
482: old priority -15, new priority -15
483: old priority -15, new priority -15
484: old priority -15, new priority -15
485: old priority -15, new priority -15
nfs: server 192.168.0.1 not responding, timed out
[neutrino.cpp] executing /var/tuxbox/config/recording.end.

Link zu diesem Kommentar
Auf anderen Seiten teilen
merkwuerden

merkwuerden

Geschrieben
Geschrieben

Wie hoch hast'n die Ringpuffer (Einstellungen -> Aufnahme -> Direktaufnahme Einstellungen -> Anz. Ringpuffer)?

Damit gibt's offenbar ein Problem bei Dir, es steht für die Ringpuffer nicht genug freier Speicher zur Verfügung:

PANIC: not enough space in ringbuffer, available 55471, needed 80641

Standard ist 30, das sollte normal reichen. Auch mit 20 funktioniert's bei mir problemlos. Muß nur das Netzwerk mitspielen und nicht mit was anderem verstopft sein.

 

Merke: je höher die Anzahl der Ringpuffer, desto mehr Speicher muß dafür frei sein. Schlimmstenfalls bleibt die Box einfach stehen oder fährt runter (Absturz), wenn zu hohe Werte verwendet werden.

 

Setze den Wert mal runter und probiere dann mal. Box vorher runterfahren und neu starten!

Link zu diesem Kommentar
Auf anderen Seiten teilen
Maan

Maan

Geschrieben
  • Autor
Geschrieben

hi,

der puffer stand auf 30 aber selbst mit dem wert 10, kam der fehler, ich hab allerdings nicht überprüft obs der gleiche war, zumindest kam die selbe fehlermeldung.

 

Was könnte da abhelfen??

Meintest du mit mehr Speicher (benötigt) RAM oder Flashspeicher??

 

Denn bei Flashspeicher könnt ich ja nachhelfen, indem ich n paar spiele lösche!???

Link zu diesem Kommentar
Auf anderen Seiten teilen
merkwuerden

merkwuerden

Geschrieben
Geschrieben

Mit dem Flash-Speicher hat das nix zu tun, da geht's um den RAM.

Wenn aber nichtmal mit 10 Ringpuffern was geht... da muß was anderes nicht passen... ;)

 

Wieviel Speicher meldet die Box denn als frei? Entweder über das Keywelt-Menü -> Sysinfo oder per telnet einloggen und den Befehl top, steht dann oben bei den Status-Infos (Mem).

 

Versuche mal noch, per Tuxbox Commander irgendeine Datei von der Box ins gemountete Verzeichnis /mnt/record zu kopieren, Quelle z.B. /bin/neutrino. Was passiert da?

Link zu diesem Kommentar
Auf anderen Seiten teilen
Maan

Maan

Geschrieben
  • Autor
Geschrieben

Der freie Speicher war 3,3MB.

 

Beim kopieren per tuxbox commander kam: "ERROR: unkown error 256".

 

Ich hab dann auch noch ma per telnet kopiert, da kam auch eine fehlermeldung:"cp: unable to close /mnt/record/neutrino : input/output error"

 

Allerdings war am Ende jeden Vorgangs eine Datei in dem Verzeichniss, die etwa gelich groß des originals war

Link zu diesem Kommentar
Auf anderen Seiten teilen
Worschter

Worschter

Geschrieben
Geschrieben

Hi,

 

benenne mal die Dateien

 

/var/tuxbox/config/recording.start

/var/tuxbox/config/recording.end

 

um, damit sie nicht mehr auffindbar sind für neutrino.

Versuch es dann nochmal.

 

EDIT:

"ERROR: unkown error 256".

 

mach mal :

Keywelt Menü -> System Menü -> Image Defragment6ierung (Standard)

Das Filesystem im Var bereich ist defekt.

Link zu diesem Kommentar
Auf anderen Seiten teilen
merkwuerden

merkwuerden

Geschrieben
Geschrieben

3,3 MB sollten reichen, ich hab schon gestreamt (mit 30 Rinpuffern), da waren nur noch knapp 2 MB frei. War zu Zeiten des spinnerten sectionsd. :D

 

Ich hab den Verdacht, daß irgendwas an Deinem Netzwerk nicht paßt, sieht so aus, als bekommt die Box keine Rückmeldung vom PC, daß die Operation beendet ist (Timeout).

Wie is'n der ganze Glumbumpf untereinander verkabelt? Direkt per Crossover, Switch, Rooter oder was? Einstellungen der Netzwerkkarte (10/100 MBit, Full-/Halfduplex)?

 

Ich hab hier z.B. über einen billigen Switch, Netzwerkkarte fest auf 100 MBit Halfduplex keine Probleme, das ging von Anfang an.

 

Überprüfe das Zeugs mal und gehe auch die NFS-Anleitung von Worschter nochmal genau durch, vielleicht hast Du da irgendwas vergessen oder nicht beachtet.

 

 

@Worschter

Verstehe nicht ganz, was das mit dem Filesystem von /var zu tun haben soll. ;)

Kannst Du mich mal aufklären?

Link zu diesem Kommentar
Auf anderen Seiten teilen
Worschter

Worschter

Geschrieben
Geschrieben

weiß der Geier warum, aber das ist bereits der zweite Fall, bei dem sich da

was verstrickt. Ich vermute Zusammmenhänge zwischen dem Abschalten des Sectionsd´s

während der Aufnahme und diesem Phänomen.

 

Ich wollt ansich nur ausschliessen, daß die Urasache an den Funktionen in den recording.*

Dateien liegt.

 

EDIT : ups ;)

 

das hat mit dem Var Filesystem in var nix zu tun, war nur ein Hinweis, daß

bei ihm das Filesystem nicht mehr beschreibbar ist. Wenns Dumm läuft muss er eh neu flashen

und dann wär´s nicht sinnvoll, jetzt mit dem Image weiter zu suchen.

Link zu diesem Kommentar
Auf anderen Seiten teilen
Maan

Maan

Geschrieben
  • Autor
Geschrieben

Neu gefeflashed. aber das gleiche problem:

 

Options:
 1: Console on null
 2: Console on ttyS0
 3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 666402 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
  Image Name:   dbox2
  Image Type:   PowerPC Linux Kernel Image (gzip compressed)
  Data Size:    666338 Bytes = 650.7 kB
Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (image@tower) (gcc version 3.4.4) #2 Mi Dez 28 02:33:
07 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:7d:d0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v1.01 (2005.12.28-01:21+0000) multi-call bUsing /lib/modu
les/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /var/modules/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Detected STB:
 Vendor: Sagem
 Model: D-BOX2 
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v001A
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/mavia_av_core: Starting avia_gt_wdt thread.
isc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/at76c651.o
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1993)...
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970
/var/plugins/operations logcs_init
rdate: time.fu-berlin.de: Host name lookup failure
$Id: sectionsd.cpp,v 1.217 2006/02/08 21:15:50 houdini Exp $
caching 50 hours
events are old 120min after their end time
minutes between timeset 30
/var/plugins/operations camd_init
$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
Using /var/modules/multicam.o
insmod: Warning: kernel-module version mismatch
       /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2
       while this kernel is version 2.4.31-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte camd37xx
/var/plugins/operations check_camd3_socket
<14>01.01.1970 01:00:11 camd3: BOXTYPE:  1
<14>01.01.1970 01:00:11 camd3: LOG:  6
<14>01.01.1970 01:00:11 camd3: UDP_PORT:  20248
<14>01.01.1970 01:00:11 camd3: original slot au on
<14>01.01.1970 01:00:11 camd3: HTTP_PORT:  9080
<14>01.01.1970 01:00:12 camd3: LOG_HOST:  127.0.0.1:514
<14>01.01.1970 01:00:12 camd3: DNS_CACHE:  600 sec
<14>01.01.1970 01:00:12 camd3: SOCKET:  /tmp/camd.sock01
<14>01.01.1970 01:00:12 camd3: KEYS:    /var/keys/camd3.keys
<14>01.01.1970 01:00:12 camd3: SERVERS:   /var/keys/camd3.servers
<14>01.01.1970 01:00:12 camd3: USERS:   /var/keys/camd3.users
<14>01.01.1970 01:00:12 camd3: Slot /dev/tts/1: initialisiere...
<14>01.01.1970 01:00:13 camd3: Slot /dev/tts/1: starte Monitor...
<14>01.01.1970 01:00:13 camd3: Slot /dev/tts/1: bereit
<14>01.01.1970 01:00:13 camd3: original slot: CAID=1702

<14>01.01.1970 01:00:13 camd3: KeyDB: gestartet
<14>01.01.1970 01:00:13 camd3: HTTP: started on port 9080
<14>01.01.1970 01:00:14 camd3: camd v3.838a - erfolgreich gestartet
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 457 onid 1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core.../var/plugins/operations sect_renice
/var/plugins/operations epg_reinit

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
starte epg_watchdog
dbox2 watchdog v0.81 by bsdice
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[sectionsd] getUTC: read: Connection timed out
[basicsocket] send_data: Resource temporarily unavailable
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.0.1:Aufnahme -> /mnt/record
[CFSMounter] Mount(0) 192.168.0.1:Musik -> /mnt/mp3
[neutrino] menue setup
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] received 33 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[timeThread] time(): 28.03.2006 00:05:49, tim: Tue Mar 28 00:05:49 2006
PES, queue 0 normal.
[CBasicClient] connect failed: /tmp/camd.socket
[timeThread] time(): 28.03.2006 00:05:50, tim: Tue Mar 28 00:05:50 2006
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
/tmp/camd.sock02: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[sectionsd] readNbytes: received POLLERR
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
Record channel_id: 44d00016dca epg: 44d00016dcac7cb, apids  mode 1
SPTS, queue 0 extended.
fsk:0, Genre:32, Dauer: 20
PANIC: not enough space in ringbuffer, available 55471, needed 80641
nfs: server 192.168.0.1 not responding, timed out
345: old priority 0, new priority -15
362: old priority 0, new priority -15
363: old priority 0, new priority -15
371: old priority 0, new priority -15
385: old priority 0, new priority -15
386: old priority 0, new priority -15
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: error in write: Input/output error
[stream2file] pthreads exit code: 4294967293
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
killall: epg_watchdog: no process killed
Record channel_id: 44d00016dca epg: 0, apids  mode 1
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed: /tmp/sectionsd.sock
/tmp/sectionsd.sock: Connection refused
PANIC: not enough space in ringbuffer, available 24759, needed 111353
nfs: server 192.168.0.1 not responding, timed out
killall: sectionsd: no process killed
345: old priority -15, new priority -15
362: old priority -15, new priority -15
363: old priority -15, new priority -15
371: old priority -15, new priority -15
414: old priority -15, new priority -15
415: old priority -15, new priority -15
416: old priority -15, new priority -15
417: old priority -15, new priority -15
418: old priority -15, new priority -15
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,200)
[CPlugins] (id,val):(rcblk_anf,100)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
Blockads Version 0.60
<Font "/share/fonts/pakenham.ttf" loaded>
[stream2file]: error in write: Input/output error
[stream2file] pthreads exit code: 4294967293
[stream2file]: timeout reading from demux

 

 

Was ich allerdings mal testen könnte wäre, versuchen auf einem linuxrechner aufzunehmen.

Ich hab einen 800Mhz PC mit SuSE 9.2 drauf, der hat auch eine Netzwerkkarte.

Da ich mich mit Linux noch nicht gut auskennem weiß ich allerdings nicht wie ich das da einstellen muss.

ich mein ip kein problem aber mit dem nfs kenn ich mich unter linux überhaupt nicht aus. ;)

Link zu diesem Kommentar
Auf anderen Seiten teilen
Maan

Maan

Geschrieben
  • Autor
Geschrieben

hab mal die dateien gelöscht (bzw. auf den pc geschoben):

 

 

devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:7d:d0
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v1.01 (2005.12.28-01:21+0000) multi-call bUsing /lib/modu
les/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /var/modules/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Detected STB:
 Vendor: Sagem
 Model: D-BOX2 
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v001A
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/mavia_av_core: Starting avia_gt_wdt thread.
isc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/at76c651.o
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1993)...
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970
/var/plugins/operations logcs_init
rdate: time.fu-berlin.de: Host name lookup failure
$Id: sectionsd.cpp,v 1.217 2006/02/08 21:15:50 houdini Exp $
caching 50 hours
events are old 120min after their end time
minutes between timeset 30
/var/plugins/operations camd_init
$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
Using /var/modules/multicam.o
insmod: Warning: kernel-module version mismatch
       /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2
       while this kernel is version 2.4.31-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte camd37xx
/var/plugins/operations check_camd3_socket
<14>01.01.1970 01:00:11 camd3: BOXTYPE:  1
<14>01.01.1970 01:00:11 camd3: LOG:  6
<14>01.01.1970 01:00:11 camd3: UDP_PORT:  20248
<14>01.01.1970 01:00:11 camd3: original slot au on
<14>01.01.1970 01:00:12 camd3: HTTP_PORT:  9080
<14>01.01.1970 01:00:12 camd3: LOG_HOST:  127.0.0.1:514
<14>01.01.1970 01:00:12 camd3: DNS_CACHE:  600 sec
<14>01.01.1970 01:00:12 camd3: SOCKET:  /tmp/camd.sock01
<14>01.01.1970 01:00:12 camd3: KEYS:    /var/keys/camd3.keys
<14>01.01.1970 01:00:12 camd3: SERVERS:   /var/keys/camd3.servers
<14>01.01.1970 01:00:12 camd3: USERS:   /var/keys/camd3.users
<14>01.01.1970 01:00:12 camd3: Slot /dev/tts/1: initialisiere...
<14>01.01.1970 01:00:13 camd3: Slot /dev/tts/1: starte Monitor...
<14>01.01.1970 01:00:13 camd3: Slot /dev/tts/1: bereit
<14>01.01.1970 01:00:13 camd3: original slot: CAID=1702

<14>01.01.1970 01:00:13 camd3: KeyDB: gestartet
<14>01.01.1970 01:00:13 camd3: camd v3.838a - erfolgreich gestartet
<14>01.01.1970 01:00:13 camd3: HTTP: started on port 9080
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 457 onid 1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
/var/plugins/operations sect_renice
[LCDFONT] initializing core.../var/plugins/operations epg_reinit

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
starte epg_watchdog
dbox2 watchdog v0.81 by bsdice
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[sectionsd] getUTC: read: Connection timed out
[basicsocket] send_data: Resource temporarily unavailable
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.0.1:Aufnahme -> /mnt/record
[CFSMounter] Mount(0) 192.168.0.1:Musik -> /mnt/mp3
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] menue setup
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] received 33 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[CBasicClient] connect failed: /tmp/camd.socket
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
/tmp/camd.sock02: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[sectionsd] getUTC: read: Connection timed out
[timeThread] time(): 28.03.2006 10:14:45, tim: Tue Mar 28 10:14:45 2006
[timeThread] time(): 28.03.2006 10:15:14, tim: Tue Mar 28 10:15:14 2006
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
sh: /var/tuxbox/config/recording.start: not found
/var/tuxbox/config/recording.startfailed: No such file or directory
no response from sectionsd
Record channel_id: 43700016d68 epg: 0, apids  mode 1
SPTS, queue 0 extended.
no response from sectionsd
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: error in write: Input/output error
nfs: server 192.168.0.1 not responding, timed out
[stream2file] pthreads exit code: 4294967293
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
sh: /var/tuxbox/config/recording.start: not found
/var/tuxbox/config/recording.startfailed: No such file or directory
no response from sectionsd
Record channel_id: 43700016d68 epg: 0, apids  mode 1
no response from sectionsd
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: error in write: Input/output error
nfs: server 192.168.0.1 not responding, timed out
[stream2file] pthreads exit code: 4294967293
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
sh: /var/tuxbox/config/recording.start: not found
/var/tuxbox/config/recording.startfailed: Illegal seek
no response from sectionsd
Record channel_id: 43700016d68 epg: 0, apids  mode 1
no response from sectionsd
PANIC: not enough space in ringbuffer, available 21990, needed 114122
nfs: server 192.168.0.1 not responding, timed out
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: error in write: Input/output error
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: timeout reading from demux
nfs: server 192.168.0.1 not responding, timed out
[stream2file] pthreads exit code: 4294967293
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
sh: /var/tuxbox/config/recording.start: not found
/var/tuxbox/config/recording.startfailed: Illegal seek
no response from sectionsd
Record channel_id: 43700016d68 epg: 0, apids  mode 1
no response from sectionsd
PANIC: not enough space in ringbuffer, available 54544, needed 81568
nfs: server 192.168.0.1 not responding, timed out
nfs: server 192.168.0.1 not responding, timed out
[stream2file]: timeout reading from demux
[stream2file] pthreads exit code: 4294967295
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
sh: /var/tuxbox/config/recording.start: not found
/var/tuxbox/config/recording.startfailed: No such file or directory
no response from sectionsd
Record channel_id: 43700016d68 epg: 0, apids  mode 1
no response from sectionsd
nfs: server 192.168.0.1 not responding, timed out
PANIC: not enough space in ringbuffer, available 14707, needed 121405
[stream2file]: error in write: Input/output error
[stream2file] pthreads exit code: 4294967293
nfs: server 192.168.0.1 not responding, timed out
[neutrino.cpp] executing /var/tuxbox/config/recording.start.
sh: /var/tuxbox/config/recording.start: not found
/var/tuxbox/config/recording.startfailed: No such file or directory
no response from sectionsd
Record channel_id: 43700016d68 epg: 0, apids  mode 1
no response from sectionsd
[stream2file] recording attempt 2
[CFileDevice] stream2file error code: -1
[stream2file]: timeout reading from demux
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable

Link zu diesem Kommentar
Auf anderen Seiten teilen
Gast guschtav

Gast guschtav

Geschrieben
Geschrieben

Will mich ja nicht einmischen, aber bist Du sicher das richtig gemountet wird? Laut log antwortet der NFS-Server nicht.

 

Geh mal mit telnet auf die Dbox, gibt mount ein und poste das Ergebnis; und: wie sehen Deine genauen "Aufnahmeeinstellungen" auf der Dbox aus?

 

Vielleicht ist es auch hilfreich, wenn man mal das CAMD3-Geraffel zum Testen ausschaltet ;)

 

Gruß

Guschtav

Link zu diesem Kommentar
Auf anderen Seiten teilen

Archiviert

Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.

Gehe zur Themenübersicht

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...