Hi!
Ich betreibe das IDE-SATA Interface von dbox2.net in einer Nokia dbox2 (Avia600) mit dem aktuellen Keywelt-Image vom Oktober.
Stromversorgung habe ich vom Netzteil abgegriffen.
Die SATA-Platte ist eine WD Scorpio Blue WD1600BEVT mit 160GB.
Leider schaffe ich es nicht eine gescheite Aufnahme von ARD oder ORF zu machen.
Alle anderen Sender klappen meist.
Wenn ich von ARD eine Direktaufnahme machen will, kriege ich immer die Meldung das die Daten
nicht schnell genug geschrieben werden konnten ...
Die Box ist dann so was von lahm, das ich es fast nicht schaffe die Aufnahme zu beenden.
Vielleicht hat ja jemand ein paar Tipps für mich ...
Hier der Bootlog:
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-52.a6.45.07.00.00-c9
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 163276
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Oct 30 2008 - 00:52:36)
CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . . | / . - \ | . / - \ done.
env: found "console" with value ttyS0
env: found "lcd_inverse" with value 0
env: found "lcd_contrast" with value 15
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670273 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670209 Bytes = 654.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.6-dbox2 (image@Server) (gcc version 3.4.6) #54 Di Nov 11 19:57:03 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:2e:c2
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs+lzma)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-11-11 20:01:23 CET)
##### Image-Version: Keywelt_Okt2008_V1.1 #####
Thu Oct 30 01:19:00 UTC 2008
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.12 2008/07/22 19:25:14 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc3890000
dboxide: IDE-Interface detected, Vendor: Unknown
dboxide: timeout, drive is still busy
dboxide: sreset succeeded
warte auf 'init_ide'
Probing IDE interface ide0...
hda: WDC WD1600BEVT-00ZCT0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 312581808 sectors (160042 MB) w/8192KiB Cache, CHS=19457/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 104380k swap-space (priority -1)
warte auf 'init_ide'
warte auf 'init_ide'
SGI XFS with no debug enabled
XFS mounting filesystem ide0(3,2)
warte auf 'init_ide'
/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 128
setting drive write-caching to 0 (off)
setting standby to 72 (6 minutes)
write-caching = 1 (on)
acoustic = 128 (128=quiet ... 254=fast)
'init_ide' fertig
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.6-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.6-dbox2/misc/avia_av.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.6-dbox2/misc/ves1820.v12.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.273 2008/10/12 10:51:53 seife Exp $
[sectionsd] Caching max 1000 events
[sectionsd] Caching 2 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/plugins/operations camd_start
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
DBox2 Multicam Driver v1.01 skars & doz21
starte camd3
30.10.2008 01:20:07 camd3: BOXTYPE: dbox2
30.10.2008 01:20:07 camd3: LOG: 2
30.10.2008 01:20:07 camd3: UDP_PORT: 20248
30.10.2008 01:20:07 camd3: original slot au on
30.10.2008 01:20:07 camd3: HTTP_PORT: 9080
30.10.2008 01:20:07 camd3: DNS_CACHE: 60 sec
30.10.2008 01:20:07 camd3: DESCR_DELAY: 0 ms
30.10.2008 01:20:07 camd3: error parse line #1 in camd3.map
30.10.2008 01:20:07 camd3: error parse line #2 in camd3.map
30.10.2008 01:20:08 camd3: error parse line #3 in camd3.map
30.10.2008 01:20:08 camd3: error parse line #4 in camd3.map
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
30.10.2008 01:20:08 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all
30.10.2008 01:20:09 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=1702:000000:0008,1722:000000:0008,
30.10.2008 01:20:09 camd3: original slot: CAID=1702
30.10.2008 01:20:09 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=1702:000000:0008,1722:000000:0008,
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 16:9
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...30.10.2008 01:20:16 camd3: KeyDB: started
[LCDFONT] adding font /share/fonts/micron.ttf...30.10.2008 01:20:17 camd3: rom120.bin -> No such file or directory
30.10.2008 01:20:17 camd3: HTTP: started on port 9080
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
30.10.2008 01:20:20 camd3: camd v3.902 - erfolgreich gestartet
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[sectionsd] getUTC: read: Connection timed out
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] received 32 sats
[neutrino] registering as event client
[controld] format: 16:9
[neutrino] initialized everything
Vorab schonmal besten Dank!
