Thendic Geschrieben 17. Februar 2013 Melden Share Geschrieben 17. Februar 2013 (bearbeitet) Hallo zusammen, nach dem flashen auf das aktuelle, neue Keywelt-Image 2.01 funktioniert mein WLAN-Stick D-Link DWA-131 mit RTL8192SU-Chipsatz nicht mehr. Ich hatte davor das 1.5er-Image drauf, da hatte es damals nach ein paar Einstellungen und Neustarts geklappt. Muss ich im aktuellen Image noch irgendwelche Dateien anpassen oder welche hinzufügen, damit WLAN funktioniert? Im Menü habe ich alles notwendige eingetragen, mit statischer Adresse und DHCP versucht, klappt nicht. Der Stick blinkt auch blau, denke das ist ein Zeichen, das er erkannt wird. Die Fritz-Box erkennt ihn auch, zumindest die Mac-Adresse, er bekommt aber keine IP-Adresse zugewiesen, ist in der Fritz-Box inaktiv. Ich denke hier besteht einfach nur noch ein Problem mit der Verbindung bzw. der Verschlüsselung, dass sich der Stick nicht richtig authentifizieren kann. Kennt jemand das Problem? Gruß bearbeitet 18. Februar 2013 von Thendic Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Thendic Geschrieben 17. Februar 2013 Autor Melden Share Geschrieben 17. Februar 2013 Hallo nochmal, es muss am neuen Image liegen. Vielleicht stimmt etwas mit den Treibern nicht!? Ich habe mein altes Image 1.5 zurückgeflasht, WLAN hat sofort funktioniert. Grüße... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Thendic Geschrieben 17. Februar 2013 Autor Melden Share Geschrieben 17. Februar 2013 Hallo zusammen, ich hatte es zwar nochmal separat gepostet, aber vielleicht findet es hier mehr Beachtung. Seit dem Switch von V1.5 auf die V2.01 funktioniert der WLAN-Stick nicht mehr. Er wird erkannt (er blinkt), kann sich aber nicht verbinden. Hat jemand ähnliche Probleme? Gruß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Markham Geschrieben 17. Februar 2013 Melden Share Geschrieben 17. Februar 2013 @Thendic Unter Einstellungen/Netztwerk 1. Wifi Treiber = Realtek 2. Netzwerkname und Netzwerkpasswort eingeben. 2. Wifi starten auf ein, dann Neustart 3. Nach Neustart -> Schnittstelle auf wlan0 einstellen. 4. Neustart Fertig. Falls es danach immer noch nicht funktioniert, erstelle bitte mit diesen Einstellungen ein Boolog. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
T.Kruessel Geschrieben 17. Februar 2013 Melden Share Geschrieben 17. Februar 2013 (bearbeitet) Hallo !! Ich kann das mit den Wlan Sticks mit RTL8192SU Chipsatz bestätigen !! Habe 2 verschiedene getestet !! Der gleiche Fehler ist auch in der letzten original Firmware, es liegt also nicht am keywelt image. Es handelt sich meiner Meinung nach um ein Treiber Problem !! Könnt ihr nicht wieder das alte Treiber Paket nemen ? Die miesten Wlan Sticks benutzen diesen Chipsatz ! Oder gibt es eine Möglichkeit die alten Treiber zu installieren ?? Gruß T bearbeitet 17. Februar 2013 von T.Kruessel Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Markham Geschrieben 17. Februar 2013 Melden Share Geschrieben 17. Februar 2013 Versucht halt die Treiber aus dem Rootfs 1.5 bzw 1.6er Image. Das RootFS läßt sich mit Winrar öffnen. Die Treiber findet Ihr in... /lib/modules/2.6.34.13-nevis/ Mein Digitus DN-7042 funktioniert jedenfalls. Edit: Im Übrigen läuft der DWA-131 mit dem r8712u Treiber, also beim tauschen des Treiber aufpassen und eventuell mal vor dem 8192cu eine # setzen, damit nur der r8712u geladen wird. Viel Glück http://anonym.to?htt..._DWA-131_rev_A1 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
T.Kruessel Geschrieben 18. Februar 2013 Melden Share Geschrieben 18. Februar 2013 So ich hab das Handtuch geschmissen !! Ich hab mir gerade auch den Digitus DN-7042 betellt !! Danke Markham !! Gruß T Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Thendic Geschrieben 19. Februar 2013 Autor Melden Share Geschrieben 19. Februar 2013 Hallo, wie das "Handtuch geschmissen"? Hast du es ausprobiert und es hat nicht geklappt? Ich denke das Thema sollte weiter verfolgt werden, denn es werden auch andere Personen die gleichen Probleme haben. Sobald ich Zeit habe werde ich den Vorschlag mal testen. Warum wurden eigentlich die Treiber zwischen 2.01 und 1.5 ausgetauscht? Hat doch alles super funktioniert... Gruß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
T.Kruessel Geschrieben 19. Februar 2013 Melden Share Geschrieben 19. Februar 2013 (bearbeitet) Hat leider auch nicht gefunzt !! Warte auf meinen neuen Stick Gruß T bearbeitet 19. Februar 2013 von T.Kruessel Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Quench Geschrieben 22. Februar 2013 Melden Share Geschrieben 22. Februar 2013 Ähnlich bei mir. Bekomm mit meinen Digitus DN-70532 (RTL8191SU) beim aktuellen Image leider auch keine Verbindung hin. Wird zwar erkannt, blinkt aber aber nur durchgehend. Beim NG 2.2. und alten Keywelt läuft der Stick hingegen ohne Probleme. Gruß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Markham Geschrieben 23. Februar 2013 Melden Share Geschrieben 23. Februar 2013 @Thendic Unter Einstellungen/Netztwerk 1. Wifi Treiber = Realtek 2. Netzwerkname und Netzwerkpasswort eingeben. 2. Wifi starten auf ein, dann Neustart 3. Nach Neustart -> Schnittstelle auf wlan0 einstellen. 4. Neustart Fertig. Falls es danach immer noch nicht funktioniert, erstelle bitte mit diesen Einstellungen ein Boolog. Die Treiber sind in beiden Images gleich. Kw: filename: 8192cu.ko description: Realtek Wireless Lan Driver author: Realtek Semiconductor Corp. license: GPL vermagic: 2.6.34.13-nevis mod_unload modversions ARMv6 parm: rtw_intel_class_mode:The intel class mode [0: off, 1: on] parm: rtw_force_iol:Force to enable IOL parm: rtw_max_roaming_times:The max roaming times to try parm: rtw_ips_mode:The default IPS mode depends: Wie wird denn bei Euch der Netzwerkname und das Passwort eingetragen? Nicht das jemand die wpa_supplicant.conf mit einem Windows Editor bearbeitet. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
satchi Geschrieben 23. Februar 2013 Melden Share Geschrieben 23. Februar 2013 und nu, habe auch das Problem mit dem Stick Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Markham Geschrieben 23. Februar 2013 Melden Share Geschrieben 23. Februar 2013 Leute, wie sollen wir Support leisten, wenn hier keine Logs auftauchen? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
T.Kruessel Geschrieben 23. Februar 2013 Melden Share Geschrieben 23. Februar 2013 Auch im aktuellen original Image werden die Wlan Sticks nicht mehr unterstüzt !! Das Keywelt ist warscheinlich auch aus den aktuellen GIT Sourcen gebaut !! Der Digitus DN-7042 funzt zumindest, das kann ich bestätigen !! T Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
satchi Geschrieben 26. Februar 2013 Melden Share Geschrieben 26. Februar 2013 na dann werde ich mal 8 € investieren. Der Stick ist eh viel schöner, da sehr klein Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
SILBEREIS Geschrieben 10. März 2013 Melden Share Geschrieben 10. März 2013 Hallo Leute, also das neue Image läuft sehr gut, aber mein WLAN-Stick Edimax EW-7811Un funktioniert auch nicht mehr, wird einfach nicht mehr erkannt. Der Edimax läuft ja mit dem Treiber rtl8192cu. Wieso dieser jetzt nicht mehr erkannt wird, ist mir schleierhaft. Mit Original-Image lief er jedenfalls einwandfrei. Gibt es jetzt schon neue Erkenntnisse? Oder einen Treiber aus dem alten 1.5 oder 1.6 Image? Ich habe den WLAN-Stick eigentlich gekauft, weil er in der Liste stand, das die 100%zig funktionieren. Das ist kein Vorwurf!! Ich würde halt nur gern einen alten Treiber testen, habe aber kein 1.6 Image. Meine Box habe ich seit 3 Tagen und bin ansonsten immer noch im Woooh-HD-Modus. Vielen Dank für eure Tips oder Anregungen. Silbereis. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
SILBEREIS Geschrieben 10. März 2013 Melden Share Geschrieben 10. März 2013 (bearbeitet) Ich suche auch ständig diese Einstellungen im neuen Image: Unter Einstellungen/Netztwerk1. Wifi Treiber = Realtek 2. Netzwerkname und Netzwerkpasswort eingeben. 2. Wifi starten auf ein, dann Neustart 3. Nach Neustart -> Schnittstelle auf wlan0 einstellen. 4. Neustart Den Eintrag "Wifi Treiber" finde ich gar nicht!! "Wifi starten" finde ich auch nicht! Beim Original-Image konnte ich auf Wlan0 wechseln und dann "Netzwerkname" und "Passwort" eingeben - und fertig! Jetzt blinkt noch nicht mal der Stick, weder in den USB Heckfront noch in der Front-USB. Der Stick wurde in einem Windows-Notebook getestet! ER funktioniert!!! Komisch irgendwie will die Coolstream mit dem 2.01 Image den Stick nicht! Silbereis bearbeitet 10. März 2013 von SILBEREIS Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 10. März 2013 Admin Melden Share Geschrieben 10. März 2013 @SILBEREIS Also ich kann diese Punkte in den Netzwerksettings eigentlich ganz gut sehen: Erst wenn der Treiber geladen ist, ist die Auswahl von wlan0 und die Eingabe der Authentifizierungsdaten sinnvoll und möglich. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
SILBEREIS Geschrieben 10. März 2013 Melden Share Geschrieben 10. März 2013 Hallo Snowhead, jetzt habe ich einen hochroten Kopf und bin zutiefst beschämt, das Menü ist ja länger als ich geglaubt habe. Mann oh Mann manchmal sieht man den Urwald bei den ganzen Bäumen nicht!!! Nach dem Einschalten und Eingabe der WLAN-Daten und zwei Hardware-Reserts, läuft es jetzt! HURRA. Vielen vielen Dank Silbereis Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
klpos1192 Geschrieben 16. Oktober 2013 Melden Share Geschrieben 16. Oktober 2013 (bearbeitet) @ThendicUnter Einstellungen/Netztwerk 1. Wifi Treiber = Realtek 2. Netzwerkname und Netzwerkpasswort eingeben. 2. Wifi starten auf ein, dann Neustart 3. Nach Neustart -> Schnittstelle auf wlan0 einstellen. 4. NeustartFertig.Falls es danach immer noch nicht funktioniert, erstelle bitte mit diesen Einstellungen ein Boolog. Ich habe eine neue Neo Twin Cable, hab das KW Image 2.01Feb installiert. Das läuft soweit. Ich bekomm WLAN net hin.Hab den Digitus 150N (DN-7042-1).Hab deine Anleitung durchgeführt, aber es kommt nie die Möglichkeit die Schnittstelle auf wlan0 umzustellen. "Schnittstelle" ist ausgegraut und es steht auf "eth0".Hat wer ne idee? Das ist doch der Realtek Chipsatz. Auf den hab ich es eingestellt. bearbeitet 18. Oktober 2013 von klpos1192 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Markham Geschrieben 16. Oktober 2013 Melden Share Geschrieben 16. Oktober 2013 @klpos1192 Log dich per Telnet ein und gib auf der Konsole den Befehl setconsole ein. Wenn du dann den Stick ziehst und wieder steckst sollte eine Ausgabe kommen. Wenn nicht, wird der Stick nicht erkannt. Ich selber habe schon mehrere DN-7042 gehabt die einfach nicht erkannt wurden. Versuchen kannst du dann nur einen anderen, Baugleichen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
klpos1192 Geschrieben 16. Oktober 2013 Melden Share Geschrieben 16. Oktober 2013 (bearbeitet) @ Markham Hast du mir ein Beispiel dass ich schauen kann, ob das setconsole erfolgreich war? coolstream login: root Password: /var # setconsole /var # momentan kam zumindest noch nichts... also beim ziehen und wieder stecken des sticks... Danke schonmal! bearbeitet 16. Oktober 2013 von klpos1192 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Markham Geschrieben 17. Oktober 2013 Melden Share Geschrieben 17. Oktober 2013 Bei mir sieht das so aus. Einmal raus und kurz danach wieder rein. /var # setconsole /var # Oct 17 16:32:46 coolstream user.info mdev-wlan: trying to bring wlan0 down Oct 17 16:32:50 coolstream user.info mdev-wlan: trying to bring wlan0 up Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
klpos1192 Geschrieben 17. Oktober 2013 Melden Share Geschrieben 17. Oktober 2013 Also dann frisst die neo2 diesen Stick wirklich nicht. Hab's auch an ner neo probiert, an der ich so ein 150n Stick schon aktiv hatte und die wollte auch nicht. Ist schon eigenartig! Danke für die Info mit dem Telnet! Ist gut zu wissen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
0verd0g Geschrieben 10. November 2013 Melden Share Geschrieben 10. November 2013 (bearbeitet) Hab auch besagtes WLAN Problem. Stick ist ein Digitus DN-7053-2, wird erkannt aber bekommt keine Verbindung. Loggt sich in der Fritzbox ein und gleich wieder aus. Mit dem 1.6er Image lief der problemlos. Hab mal Bootlogs erstellt, vielleicht kann da ja jemand was erkennen : Keywelt 2.01 startet at 10.11.2013 15:25:09 ------------------------------ [2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Chipset information º º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º º Option: 00010000 max. clock: 600 MHz Core voltage: high º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Clock information º º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º º CPU : 594.000 MHz from PLL1 º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Memory configuration º º Start ³ End ³ Type ³ Description º ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Serial number: 010-00002615 (0A-000A37) º º *** Warning - bad CRC, using default environment *** º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Network configuration º º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-0A-37 º º PHY: IC Plus IP101 address: 09 º Error: Bad gzipped data Error: no valid bmp or bmp.gz image at f0060000 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Hit any key to stop autoboot: 1 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2344340 Bytes = 2.2 MB Load Address: 00048000 Entry Point: 00048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.16.0) ) #1 Tue Jan 1 01:59:46 CET 2013 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f CPU: VIPT aliasing data cache, VIPT aliasing instruction cache Machine: CoolStream HDx IRD Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 384928k/384928k available, 8288k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0x98800000 - 0xe0000000 (1144 MB) lowmem : 0x80000000 - 0x98000000 ( 384 MB) modules : 0x7e800000 - 0x80000000 ( 24 MB) .init : 0x80048000 - 0x80063000 ( 108 kB) .text : 0x80063000 - 0x8048c000 (4260 kB) .data : 0x8048c000 - 0x804aeea0 ( 140 kB) NR_IRQS:352 Console: colour dummy device 80x30 console [ttyRI0] enabled Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) Installing knfsd (copyright © 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 751 io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded CX2450x MTD driver v1.0 (Jan 1 2013, 01:54:56) © Coolstream International Ltd. cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x000000000000-0x000000060000 : "U-Boot" 0x000000060000-0x000000080000 : "Splash" 0x000000080000-0x000000480000 : "kernel" 0x000000480000-0x000002000000 : "systemFS" arcvmac arcvmac: ARC VMAC at 0x80490580 irq 24 00:c5:5c:00:0a:37 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Trident CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Trident CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 usb 2-1: new high speed USB device using cx2450x-ehci and address 2 usb 2-1: New USB device found, idVendor=0bda, idProduct=8172 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: RTL8191S WLAN Adapter usb 2-1: Manufacturer: Manufacturer Realtek usb 2-1: SerialNumber: 00e04c000001 VFS: Mounted root (jffs2 filesystem) on device 31:3. Freeing init memory: 108K init started: BusyBox v1.20.2 (2013-02-12 17:42:24 CET) running /sbin/mknodes rootdir=/dev table= makedevs: line 16: can't create node console: File exists done /sbin/mknodes starting /etc/init.d/S00loadmodules ... cs_frontpanel: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Frontpanel driver v0.12.0 (Dec 5 2012, 15:06:56) © Coolstream International Limited [1;33mFrontpanel: wakeup source 2 time hi 0 lo 0 [0m==DriverVersion: v2.6.6.0.20120405== register rtl8712_netdev_ops to netdev_ops rtw_wdev_alloc 8712_usb_endpoint_descriptor(0): bLength=7 bDescriptorType=5 bEndpointAddress=83 wMaxPacketSize=200 bInterval=0 8712_usb_endpoint_descriptor(1): bLength=7 bDescriptorType=5 bEndpointAddress=4 wMaxPacketSize=200 bInterval=0 8712_usb_endpoint_descriptor(2): bLength=7 bDescriptorType=5 bEndpointAddress=6 wMaxPacketSize=200 bInterval=0 8712_usb_endpoint_descriptor(3): bLength=7 bDescriptorType=5 bEndpointAddress=d wMaxPacketSize=200 bInterval=0 8712u : USB_SPEED_HIGH nr_endpoint=4 Boot from EFUSE Autoload OK!! CustomerID = 0x 0 MAC Address from efuse= 0-2-72-b5-d1-b6 cfg80211_rtw_set_power_mgmt usbcore: registered new interface driver r871x_usb_drv rtw driver version=v3.4.3_4369.20120622 Build at: Dec 5 2012 15:05:54 usbcore: registered new interface driver rtl8192cu Slow work thread pool: Starting up Slow work thread pool: Ready fuse init (API version 7.13) usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver CX2450x I2C-bus driver version 0.3b (Dec 5 2012, 15:06:57) © Coolstream International Limited Memory configured as 2 banks KAL over-allocation map ('x' = kernel, 'C' = cnxt): <6>------- 0 ------------- to ------------ 256 --------------- ooooooooooooxoooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC <6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC <6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxx <6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx <6>------- 256 ------------- to ------------ 512 --------------- CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxx <6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxoooooooxoooooooo <6>................................................................ <6>................................................................ . = no RAM present C = Conexant KAL o = unutilized or Kernel RAM KAL: Starting the KAL... KAL Bank[0] cached @ V:0x8a400000 == P:0x0a400000, 5120 KB KAL Bank[0] uncached @ V:0x83b00000 == P:0x03b00000, 107520 KB KAL Bank[0] content @ V:0x81000000 == P:0x01000000, 44032 KB KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB KAL Bank[1] uncached @ V:0x91f00000 == P:0x11f00000, 25600 KB KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 31744 KB KAL: Tiled physical region 0x01000000 to 0x03580000 (15) KAL: Tiled physical region 0x10000000 to 0x11e00000 (15) KAL: Module loaded cnxt_base_drv: Initializing Edwards drivers... cnxt_base_drv: Done initializing Edwards drivers. cnxt_base_drv: Module loaded with major device 101 FB: cnxtfb_init_inst, plane OSD FB: mode 1280x720p-50 FB: HD Mode: 1280x720 FrameRate 5 SD Mode: 720x576 FrameRate 2 1 RCR=0x153f00e 2 RCR=0x553f00e MAC Address= 0-2-72-b5-d1-b6 fwdbg:Chnl: 00000006 rtw_cfg80211_init_wiphy:rf_config=1 fwdbg:RTL8712 FW version 0.0.1# Mon Apr 2 19:54:57 CST 2012 SVN: fwdbg:Chip Version:00000002 fwdbg:HCI type: 00000012(00000004) fwdbg:rf_cofig: 00000012(000000fe, 00000000, 00000000) fwdbg:mp_mode: 00000000(00000001), IQK: 400000fc fwdbg:vcs type: 00000002(00000001) fwdbg:target thermal: 00000017, bt_coexist: 00000000 fwdbg:gd_powerGain = 0, KeepAliveBcnItvCnt = 350 fwdbg:bAutoloadOk: 00000001, ChnlPlan:00000002 fwdbg:->(00000001, 00000001, 00000001, 00000000) r871x_wx_set_pmkid: IW_PMKSA_FLUSH! set_mode = IW_MODE_INFRA fwdbg:set opmode: 00000000 fwdbg:setAuth: 00000000 fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000006 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000005, 00000000) fwdbg:setAuth: 00000000 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 00000161) fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 fwdbg:join res(00000001, 00000161) [logoview] done with Timeout... /proc/cnxt_trace_flags created # alsa_card_CX2450_init Success 8 , 116 cs_tsx_hsdp_set_port_speed: num: 594 denom: 7 cs_frontend version 0.6b DVB: registering new adapter (cs_frontend_dvb) stv090x_attach: Trying to attach STV090x demodulator(1) DVB: Unable to find symbol cx24116_attach() avl2108_attach: Attaching AVL2108 demodulator(0) DVB: registering adapter 0 frontend 0 (AVL2108 Demodulator)... cnxt_sata version 2.3cs scsi0 : cnxt_sata ata1: SATA max UDMA/133 irq 42 scsi1 : cnxt_sata ata2: SATA max UDMA/133 irq 35 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) starting /etc/init.d/S01mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... ifup: interface wlan0 already configured Starting ifplugd... vmac_mii_bus: probed arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1) Sat Jan 1 00:00:00 CET 2000 done. starting /etc/init.d/S52syslogd ... Jan 1 00:00:00 flash syslog.info syslogd started: BusyBox v1.20.2 starting /etc/init.d/S60autofs ... fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c PHY: 0:09 - Link is Down fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000006, 00000000) fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 00000161) fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000006, 00000000) fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 00000161) Name server cannot be used, exiting 1 Jan 00:00:20 ntpdate[577]: name server cannot be used, reason: Temporary failure in name resolution hostname: flash.cooli: Host name lookup failure starting the automounter... starting /etc/init.d/S90inetd ... starting /etc/init.d/S95rescan-failed-drives ... starting /etc/init.d/S96nfsd ... starting /etc/init.d/S9A_rescue ... Jan 1 00:00:20 flash daemon.err automount[585]: failed to load map, exiting fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000004, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000004, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 rescanning /sys/class/scsi_host/host0 ata1: hard resetting link ata1: SATA link down (SStatus 0 SControl 300) ata1: EH complete rescanning /sys/class/scsi_host/host1 ata2: hard resetting link ata2: SATA link down (SStatus 0 SControl 300) ata2: EH complete fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden starting /etc/init.d/S9L_logomask ... starting /etc/init.d/S9T_tuxcald ... fwdbg:Chnl: 0000000c starting /etc/init.d/S9T_tuxmaild ... fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000005, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 /var/plugins/operations camd_start /var/plugins/operations rezap fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 [CBasicClient] connect failed. /tmp/zapit.sock: No such file or directory m_cBoxFrame.iHeight 662 m_cBoxFrameBrowserList.iHeight 331 m_settings.browserFrameHeight 50 avl2108_load_firmware: Waiting for firmware upload (dvb-fe-avl2108.fw)... i2c i2c-0: firmware: requesting dvb-fe-avl2108.fw avl2108_load_firmware: Waiting for firmware upload(2)... avl2108_load_firmware: Firmware upload complete [/home/image/coolstream/bs-cst-neutrino-hd/source/neutrino-hd/src/zapit/src/frontend.cpp:Open:191] /dev/dvb/adapter0/frontend1: No such file or directory /var/tuxbox/config/zapit/services.xml: No such file or directory /var/tuxbox/config/zapit/myservices.xml: No such file or directory /var/tuxbox/config/zapit/bouquets.xml: No such file or directory /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory cs_tsx_hsdp_set_port_speed: num: 594 denom: 7 /var/tuxbox/config/deepstandby.off failed: No such file or directory [0;33m[dvbsub @ 0x5c9680] Invalid extradata, subtitle streams may be combined! 00:00:58.985 [sectionsd] start 00:00:58.990 [sectionsd] starting [0m/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory 00:00:59.021 00:00:59.023 cnThread::run:: starting, pid 654 (1167074400) 00:00:59.024 freeSatThread::run:: starting, pid 654 (1175463008) 00:00:59.024 timeThread::run:: starting, pid 654 (1150297184) eitThread::run:: starting, pid 654 (1158685792) 00:00:59.111 timeThread: getting DVB time (isOpen 1) fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000006, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 logomask Version 1.2 fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000005, 00000000) fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 00000161) fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000007, 00000000) fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 00000161) 00:01:35.132 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1 00:01:35.133 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:01:35.134 timeThread: going to sleep 1 seconds, running 1 scanning 1 00:01:35.154 timeThread: going to sleep for 1 seconds... 00:01:36.162 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110 00:01:36.170 timeThread: getting DVB time (isOpen 1) fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000006, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000006, 00000000) fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 00000161) fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 fwdbg:join res(00000001, 00000161) fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000002, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 00:02:12.172 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1 00:02:12.173 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:02:12.174 timeThread: going to sleep 1 seconds, running 1 scanning 1 00:02:12.194 timeThread: going to sleep for 1 seconds... 00:02:13.202 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110 00:02:13.210 timeThread: getting DVB time (isOpen 1) fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000003, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:get survey cmd fwdbg:Chnl: 00000001 fwdbg:Chnl: 00000002 fwdbg:Chnl: 00000003 fwdbg:Chnl: 00000004 fwdbg:Chnl: 00000005 fwdbg:Chnl: 00000006 fwdbg:Chnl: 00000007 fwdbg:Chnl: 00000008 fwdbg:Chnl: 00000009 fwdbg:Chnl: 0000000a fwdbg:Chnl: 0000000b fwdbg:Chnl: 0000000c fwdbg:Chnl: 0000000d fwdbg:8712 not supported 5G ch: 36 fwdbg:Chnl: 00000001 rtw_cfg80211_indicate_scan_done rtw_cfg80211_indicate_scan_done without scan req fwdbg:survey done(00000005, 00000000) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:setAuth: 00000000 fwdbg:issue_deauth fwdbg:Chnl: 00000001 fwdbg:get join cmd fwdbg:Chnl: 00000001 fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000031) fwdbg:issue assocreq(00000031) fwdbg:mac id #5: 00000053, 00000fff, 00000000 rtw_cfg80211_indicate_connect(padapter=988f8000) fwdbg:join res(00000001, 000001b7) fwdbg:CMD SEQ is not Matched (00000012, 0000003a) wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:CMD SEQ is not Matched (0000003a, 0000003b) 00:02:49.212 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1 00:02:49.213 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:02:49.214 timeThread: going to sleep 1 seconds, running 1 scanning 1 00:02:49.234 timeThread: going to sleep for 1 seconds... 00:02:50.242 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110 00:02:50.250 timeThread: getting DVB time (isOpen 1) fwdbg:issue keepalive null data fwdbg:issue keepalive null data wx_get_scan, mcs_rate_bitmap=0x0 fwdbg:CMD SEQ is not Matched (0000003b, 0000003c) fwdbg:CMD SEQ is not Matched (0000003c, 0000003d) fwdbg:CMD SEQ is not Matched (0000003d, 0000003e) rtw_cfg80211_indicate_disconnect(padapter=988f8000) pwdev->sme_state=0 fwdbg:CMD SEQ is not Matched (0000003e, 0000003f) 00:03:26.252 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1 00:03:26.253 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:03:26.254 timeThread: going to sleep 1 seconds, running 1 scanning 1 00:03:26.274 timeThread: going to sleep for 1 seconds... 00:03:27.282 timeThread: wakeup, running 1 scanning 1 channel 0 reason 110 00:03:27.290 timeThread: getting DVB time (isOpen 1) fwdbg:issue keepalive null data fwdbg:issue keepalive null data ------------------------------ stopped at 10.11.2013 16:29:46 Keywelt 1.6 startet at 10.11.2013 17:08:01 ------------------------------ [2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Chipset information º º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º º Option: 00010000 max. clock: 600 MHz Core voltage: high º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Clock information º º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º º CPU : 594.000 MHz from PLL1 º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Memory configuration º º Start ³ End ³ Type ³ Description º ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Serial number: 010-00002615 (0A-000A37) º º *** Warning - bad CRC, using default environment *** º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Network configuration º º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-0A-37 º º PHY: IC Plus IP101 address: 09 º Error: Bad gzipped data Error: no valid bmp or bmp.gz image at f0060000 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Hit any key to stop autoboot: 1 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream HDx Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4136592 Bytes = 3.9 MB Load Address: 17048000 Entry Point: 17048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Linux version 2.6.26.8-nevis (image@LAPTOP2) (gcc version 4.3.2 (crosstool-NG-1.3.2) ) #1 Sun Jan 15 19:42:41 CET 2012 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f Machine: CoolStream HDx IRD Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x30 console [ttyRI0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 383232KB available (3804K code, 349K data, 116K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 192 bytes NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (SUMMARY) © 2001-2006 Red Hat, Inc. SGI XFS with security attributes, realtime, no debug enabled msgmni has been set to 748 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded Inside emacdev_load function Inside emacdev_init function EMAC 0 Initialized RealTek 8201 PHY eth0: Link down Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods CX2450x MTD driver v1.0 (Jan 15 2012, 19:37:46) © Coolstream International Ltd. cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x00000000-0x00060000 : "U-Boot" 0x00060000-0x00080000 : "Splash" 0x00080000-0x00480000 : "kernel" 0x00480000-0x02000000 : "systemFS" cx2450x-ehci cx2450x-ehci.0: Conexant CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Conexant CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 cx2450x-ehci cx2450x-ehci.1: Conexant CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Conexant CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 Initializing USB Mass Storage driver... usb 2-1: new high speed USB device using cx2450x-ehci and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=0bda, idProduct=8172 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: RTL8191S WLAN Adapter usb 2-1: Manufacturer: Manufacturer Realtek usb 2-1: SerialNumber: 00e04c000001 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Advanced Linux Sound Architecture Driver Version 1.0.16. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. VFS: Mounted root (jffs2 filesystem). Freeing init memory: 116K init started: BusyBox v1.18.4 (coolstream) running /sbin/mknodes rootdir=/dev table= makedevs: line 16: can't create node console: File exists done /sbin/mknodes starting /etc/init.d/S00loadmodules ... cs_frontpanel: module license 'Proprietary' taints kernel. Frontpanel driver v0.12.0 (Jan 18 2012, 14:43:13) © Coolstream International Limited [1;33mFrontpanel: wakeup source 2 time hi 0 lo 0 [0m==DriverVersion: v2.6.6.0.20101111== 8712_usb_endpoint_descriptor(0): bLength=7 bDescriptorType=5 bEndpointAddress=83 wMaxPacketSize=200 bInterval=0 8712_usb_endpoint_descriptor(1): bLength=7 bDescriptorType=5 bEndpointAddress=4 wMaxPacketSize=200 bInterval=0 8712_usb_endpoint_descriptor(2): bLength=7 bDescriptorType=5 bEndpointAddress=6 wMaxPacketSize=200 bInterval=0 8712_usb_endpoint_descriptor(3): bLength=7 bDescriptorType=5 bEndpointAddress=d wMaxPacketSize=200 bInterval=0 8712u : USB_SPEED_HIGH nr_endpoint=4 Boot from EFUSE Autoload OK!! CustomerID = 0x 0 MAC Address from efuse= 0-2-72-b5-d1-b6 usbcore: registered new interface driver r871x_usb_drv rtw driver version=v2.0.1324.20110126 usbcore: registered new interface driver rtw_usb_drv fuse init (API version 7.9) usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core usbserial: USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver CX2450x I2C-bus driver version 0.3b (Jan 18 2012, 14:43:15) © Coolstream International Limited Memory configured as 2 banks KAL over-allocation map ('x' = kernel, 'C' = cnxt): ------- 0 ------------- to ------------ 256 --------------- ooooooooooooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ------- 256 ------------- to ------------ 512 --------------- CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxooxxoooooooooooooooo ................................................................ ................................................................ . = no RAM present C = Conexant KAL o = unutilized or Kernel RAM KAL: Starting the KAL... KAL Bank[0] cached @ V:0x8a000000 == P:0x0a000000, 5120 KB KAL Bank[0] uncached @ V:0x83700000 == P:0x03700000, 107520 KB KAL Bank[0] content @ V:0x80c00000 == P:0x00c00000, 44032 KB KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB KAL Bank[1] uncached @ V:0x91f00000 == P:0x11f00000, 25600 KB KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 31744 KB KAL: Tiled physical region 0x00c00000 to 0x03180000 (15) KAL: Tiled physical region 0x10000000 to 0x11e00000 (15) KAL: Module loaded cnxt_base_drv: Initializing Edwards drivers... cnxt_base_drv: Done initializing Edwards drivers. cnxt_base_drv: Module loaded with major device 101 FB: cnxtfb_init_inst, plane OSD FB: mode 1280x720p-50 FB: HD Mode: 1280x720 FrameRate 5 SD Mode: 720x576 FrameRate 2 /proc/cnxt_trace_flags created # alsa_card_CX2450_init Success 8 , 116 cs_tsx_hsdp_set_port_speed: num: 594 denom: 7 cs_frontend version 0.6b DVB: registering new adapter (cs_frontend_dvb) stv090x_attach: Trying to attach STV090x demodulator(1) DVB: Unable to find symbol cx24116_attach() avl2108_attach: Attaching AVL2108 demodulator(0) DVB: registering adapter 0 frontend 0 (AVL2108 Demodulator)... scsi0 : cnxt_sata ata1: SATA max UDMA/133 irq 42 ata1: SATA link down (SStatus 0 SControl 300) scsi1 : cnxt_sata ata2: SATA max UDMA/133 irq 35 ata2: SATA link down (SStatus 0 SControl 300) starting /etc/init.d/S01mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... Starting wlan0 Failed to connect to wpa_supplicant - wpa_ctrl_open: Success 1 RCR=0x153f00e 2 RCR=0x553f00e MAC Address= 0-2-72-b5-d1-b6 fwdbg:RTL8712 FW version 0.0.1# 三 8月 11 20:37:05 CST 2010 SVN fwdbg:Chip Version:00000002 fwdbg:HCI type: 00000012(00000004) fwdbg:rf_cofig: 00000012(000000fe, 00000000, 00000000) fwdbg:mp_mode: 00000000(00000001), IQK: 400000fc fwdbg:vcs type: 00000002(00000001) fwdbg:32k calibra: 733, 32K TSF: 0000002c fwdbg:target thermal: 00000017, bt_coexist: 00000000 fwdbg:->(00000001, 00000001, 00000001, 00000000) r871x_wx_set_pmkid: IW_PMKSA_FLUSH! set_mode = IW_MODE_INFRA fwdbg:set opmode: 00000000 Linux wireless extensions version 22 detected. ipw2x00 driver uses driver_wext (-Dwext) instead of driver_ipw. fwdbg:get survey cmd fwdbg:survey done(00000002, 00000000) wpa_ie(length:22): 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00 fwdbg:setAuth: 00000002 fwdbg:get join cmd fwdbg:cur channel: 00000001, bcn interval: 00000064 fwdbg:link to Atheros AP fwdbg:issue auth fwdbg:issue assocreq(00000047) fwdbg:mac id #5: 0000005b, 100fffff, 00000007 fwdbg:join res(00000001, 000001b7) fwdbg:rcv set_stakey Sat Jan 1 00:00:00 CET 2000 done. starting /etc/init.d/S52syslogd ... starting /etc/init.d/S53nfsd ... Jan 1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.18.4 starting /etc/init.d/S54inetd ... starting /etc/init.d/S60autofs ... starting the automounter... starting /etc/init.d/S60rsyncd ... Jan 1 00:00:00 coolstream daemon.info rsyncd[500]: rsyncd version 3.0.7 starting, listening on port 873 Jan 1 00:00:00 coolstream daemon.err automount[494]: failed to load map, exiting starting /etc/init.d/S95rescan-failed-drives ... starting /etc/init.d/S9L_logomask ... starting /etc/init.d/S9T_tuxcald ... starting /etc/init.d/S9T_tuxmaild ... [got_addbareq_event_callback] mac = 0 24 FE 5 F1 E5, seq = 32, tid = 0 fwdbg:issue action: 00000003, 00000001, 00000000 fwdbg:issue action: 00000003, 00000000, 00000000 fwdbg:ADDBA RSP: 00000001 Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start /var/plugins/operations camd_start /var/plugins/operations rezap [CBasicClient] connect failed. /tmp/zapit.sock: No such file or directory 10 Nov 17:08:46 ntpdate[479]: step time server 130.133.1.10 offset 437418523.377719 sec avl2108_load_firmware: Waiting for firmware upload (dvb-fe-avl2108.fw)... firmware: requesting dvb-fe-avl2108.fw avl2108_load_firmware: Waiting for firmware upload(2)... avl2108_load_firmware: Firmware upload complete /var/tuxbox/config/zapit/myservices.xml: No such file or directory sh: /var/tuxbox/config/deepstandby.off: not found /var/tuxbox/config/deepstandby.off: No such file or directory /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory [ConfigFile] Unable to open file /var/tuxbox/config/moviebrowser.conf for reading. m_cBoxFrame.iHeight 665 m_cBoxFrameBrowserList.iHeight 332 m_settings.browserFrameHeight 50 17:08:58.071 [timeThread] - 10.11.2013 17:08:58, tim: Sun Nov 10 17:08:57 2013 17:08:58.081 [timeThread] Time set via DVB(TDT), going to sleep for 5 seconds. showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Das Erste HD.png after showchannellogo, mode = 3 ret = 3 logo_ok = 1 showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Das Erste HD.png after showchannellogo, mode = 3 ret = 3 logo_ok = 1 17:09:02.259 eit_set_update_filter, servicekey = 0x3f300012b5c, current version 0xff got events 0 rescanning /sys/class/scsi_host/host0 logomask Version 1.04 ata1: hard resetting link ata1: SATA link down (SStatus 0 SControl 300) ata1: EH complete rescanning /sys/class/scsi_host/host1 ata2: hard resetting link ata2: SATA link down (SStatus 0 SControl 300) ata2: EH complete 17:09:06.045 getUTC(TOT): len=13 cc=DEU reg_id=0 pol=0 offs=0100 new=0200 when=Sun Mar 30 01:00:00 2014 17:09:06.067 [timeThread] - 10.11.2013 17:09:06, tim: Sun Nov 10 17:09:05 2013 17:09:06.070 [timeThread] Time set via DVB(TOT), going to sleep for 1800 seconds. ------------------------------ stopped at 10.11.2013 17:09:11 bearbeitet 10. November 2013 von 0verd0g Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge