Collstream-ZEE bekommt keine Netzwerkverbindung

[ma_cst]

Hallo zusammen.

 

Ich habe ein Problem mit meiner Coolstream ZEE nachdem ich das Keywelt Img 1.60 geflashed habe. Es werden zwar noch die Netzwerkadapter erkannt (wlan0, eth0) aber die Cooli bekommt keine Netzwerkverbindung hin. Die Erkennung des WLAN-USB-Sticks mit MAC-Adresse funktioniert und die Konfiguration (DHCP ein, WLAN-Name und WPA-Schlüssel) ist korrekt gespeichert, aber beim Neuboot der Cooli wird der WLAN-Stick nicht angesprochen (blinkt nicht) -> Fehlermeldung kein Netzwerk. Ebenso reagiert die Cooli nicht auf Anschliessen an meine FritzBox über Ethernet-Kabel (Konfiguration mit DHCP ein).

Ein Versuch, ein original-Image zu flashen (über USB-Frontport)scheitert an der Erkennung des USB-Sticks (FAT32 mit Ordner coolstream und Images) beim Booten der Cooli.

 

Hat jemand Ideen oder Hinweise, was ich noch probieren kann.

Vielen Dank

 

p.s.:Habe leider kein RS232 Kabel zur Bootlog-Prüfung

[Gandalf]

Flash das KW-Image V2.01, hat aktuellere Treiber.

[ma_cst]

Sorry. Hatte bereits das aktuelle KW-Image V2.01 genommen.

[Don de Deckelwech]

Hi,

Ebenso reagiert die Cooli nicht auf Anschliessen an meine FritzBox über Ethernet-Kabel (Konfiguration mit DHCP ein).

Hattest du dabei den Wlan-Stick wieder abgezogen? Und evtl zus. die Einstellungen für diesen gelöscht?

 

Wenn das nichts hilft, dann musst du weitere USB-Sticks zum Flashen versuchen, die Coolie ist da leider etwas zickig. manchmal funktioniert erst der 4. oder 5. oder so...

 

Ciao,

DdD.

[ma_cst]

Hallo.

Ich habe mal ein Bootlog erstellt bei angeschlossenem WLAN USB-Stick im FrontPanel.

Vielen Dank für eure schnellen Antworten und Tipps!!!!

 

 

 

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.22 18:28:50 =~=~=~=~=~=~=~=~=~=~=~=

[2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»

º U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx º

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

º Chipset information º

º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º

º Option: 00010000 max. clock: 600 MHz Core voltage: high º

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

º Clock information º

º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º

º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º

º CPU : 594.000 MHz from PLL1 º

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

º Memory configuration º

º Start ³ End ³ Type ³ Description º

ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ

º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º

º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º

º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

º Serial number: 010-00006212 (0A-001844) º

º *** Warning - bad CRC, using default environment *** º

ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹

º Network configuration º

º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-18-44 º

º PHY: IC Plus IP101 address: 09 º

Error: Bad gzipped data

Error: no valid bmp or bmp.gz image at f0060000

ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Hit any key to stop autoboot: 1 0

## Booting kernel from Legacy Image at f0080000 ...

Image Name: Coolstream Kernel (compressed)

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 2344340 Bytes = 2.2 MB

Load Address: 00048000

Entry Point: 00048000

Verifying Checksum ... OK

Loading Kernel Image ... OK

OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.16.0) ) #1 Tue Jan 1 01:59:46 CET 2013

CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f

CPU: VIPT aliasing data cache, VIPT aliasing instruction cache

Machine: CoolStream HDx IRD

Memory policy: ECC disabled, Data cache writeback

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536

Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M

PID hash table entries: 2048 (order: 1, 8192 bytes)

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 384MB = 384MB total

Memory: 384928k/384928k available, 8288k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 - 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

DMA : 0xffc00000 - 0xffe00000 ( 2 MB)

vmalloc : 0x98800000 - 0xe0000000 (1144 MB)

lowmem : 0x80000000 - 0x98000000 ( 384 MB)

modules : 0x7e800000 - 0x80000000 ( 24 MB)

.init : 0x80048000 - 0x80063000 ( 108 kB)

.text : 0x80063000 - 0x8048c000 (4260 kB)

.data : 0x8048c000 - 0x804aeea0 ( 140 kB)

NR_IRQS:352

Console: colour dummy device 80x30

console [ttyRI0] enabled

Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Advanced Linux Sound Architecture Driver Version 1.0.22.1.

cfg80211: Calling CRDA to update world regulatory domain

NET: Registered protocol family 2

IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 16384 bind 16384)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

NetWinder Floating Point Emulator V0.97 (double precision)

Installing knfsd (copyright © 1996 okir@monad.swb.de).

JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

msgmni has been set to 751

io scheduler noop registered

io scheduler deadline registered (default)

io scheduler cfq registered

ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART

brd: module loaded

loop: module loaded

CX2450x MTD driver v1.0 (Jan 1 2013, 01:54:56) © Coolstream International Ltd.

cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank

Amd/Fujitsu Extended Query Table at 0x0040

cx2450xflash: CFI does not contain boot bank location. Assuming top.

number of CFI chips: 1

4 cmdlinepart partitions found on MTD device cx2450xflash

Creating 4 MTD partitions on "cx2450xflash":

0x000000000000-0x000000060000 : "U-Boot"

0x000000060000-0x000000080000 : "Splash"

0x000000080000-0x000000480000 : "kernel"

0x000000480000-0x000002000000 : "systemFS"

arcvmac arcvmac: ARC VMAC at 0x80490580 irq 24 00:c5:5c:00:18:44

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller

cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1

cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100

cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00

usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: Trident CX2450X EHCI USB-Controller

usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd

usb usb1: SerialNumber: cx2450x-ehci.0

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller

cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2

cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100

usb 1-1: new high speed USB device using cx2450x-ehci and address 2

cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00

usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb2: Product: Trident CX2450X EHCI USB-Controller

usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd

usb usb2: SerialNumber: cx2450x-ehci.1

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

i2c /dev entries driver

usbcore: registered new interface driver hiddev

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

ALSA device list:

No soundcards found.

TCP cubic registered

NET: Registered protocol family 17

NET: Registered protocol family 15

usb 1-1: New USB device found, idVendor=07d1, idProduct=3303

usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

usb 1-1: Product: 11n Adapter

usb 1-1: Manufacturer: Manufacturer Realtek

usb 1-1: SerialNumber: 00e04c000001

VFS: Mounted root (jffs2 filesystem) on device 31:3.

Freeing init memory: 108K

init started: BusyBox v1.20.2 (2013-02-12 17:42:24 CET)

running /sbin/mknodes

rootdir=/dev

table=<stdin>

makedevs: line 16: can't create node console: File exists

done /sbin/mknodes

starting /etc/init.d/S00loadmodules ...

cs_frontpanel: module license 'Proprietary' taints kernel.

Disabling lock debugging due to kernel taint

Frontpanel driver v0.12.0 (Dec 5 2012, 15:06:56) © Coolstream International Limited

[1;33mFrontpanel: wakeup source ff time hi ff lo ff

[0m==DriverVersion: v2.6.6.0.20120405==

register rtl8712_netdev_ops to netdev_ops

rtw_wdev_alloc

8712_usb_endpoint_descriptor(0):

bLength=7

bDescriptorType=5

bEndpointAddress=83

wMaxPacketSize=200

bInterval=0

8712_usb_endpoint_descriptor(1):

bLength=7

bDescriptorType=5

bEndpointAddress=4

wMaxPacketSize=200

bInterval=0

8712_usb_endpoint_descriptor(2):

bLength=7

bDescriptorType=5

bEndpointAddress=6

wMaxPacketSize=200

bInterval=0

8712_usb_endpoint_descriptor(3):

bLength=7

bDescriptorType=5

bEndpointAddress=d

wMaxPacketSize=200

bInterval=0

8712u : USB_SPEED_HIGH

nr_endpoint=4

Boot from EFUSE

Autoload OK!!

CustomerID = 0x 0

MAC Address from efuse= 14-d6-4d-7-c7-da

cfg80211_rtw_set_power_mgmt

usbcore: registered new interface driver r871x_usb_drv

rtw driver version=v3.4.3_4369.20120622

Build at: Dec 5 2012 15:05:54

usbcore: registered new interface driver rtl8192cu

Slow work thread pool: Starting up

Slow work thread pool: Ready

fuse init (API version 7.13)

usbcore: registered new interface driver usbserial

usbserial: USB Serial Driver core

USB Serial support registered for pl2303

usbcore: registered new interface driver pl2303

pl2303: Prolific PL2303 USB to serial adaptor driver

USB Serial support registered for FTDI USB Serial Device

usbcore: registered new interface driver ftdi_sio

ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver

CX2450x I2C-bus driver version 0.3b (Dec 5 2012, 15:06:57) © Coolstream International Limited

Memory configured as 2 banks

KAL over-allocation map ('x' = kernel, 'C' = cnxt):

<6>------- 0 ------------- to ------------ 256 ---------------

ooooooooooooooooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

<6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxx

<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

<6>------- 256 ------------- to ------------ 512 ---------------

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxxxxx

<6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxooooooxxoooooooo

<6>................................................................

<6>................................................................

. = no RAM present

C = Conexant KAL

o = unutilized or Kernel RAM

KAL: Starting the KAL...

KAL Bank[0] cached @ V:0x8a400000 == P:0x0a400000, 5120 KB

KAL Bank[0] uncached @ V:0x83b00000 == P:0x03b00000, 107520 KB

KAL Bank[0] content @ V:0x81000000 == P:0x01000000, 44032 KB

KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB

KAL Bank[1] uncached @ V:0x91f00000 == P:0x11f00000, 25600 KB

KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 31744 KB

KAL: Tiled physical region 0x01000000 to 0x03580000 (15)

KAL: Tiled physical region 0x10000000 to 0x11e00000 (15)

KAL: Module loaded

cnxt_base_drv: Initializing Edwards drivers...

cnxt_base_drv: Done initializing Edwards drivers.

cnxt_base_drv: Module loaded with major device 101

FB: cnxtfb_init_inst, plane OSD

FB: mode 1280x720p-50

FB: HD Mode: 1280x720 FrameRate 5

SD Mode: 720x576 FrameRate 2

[logoview] done with Timeout...

/proc/cnxt_trace_flags created

# alsa_card_CX2450_init Success 8 , 116

cs_tsx_hsdp_set_port_speed: num: 594 denom: 7

cs_frontend version 0.6b

DVB: registering new adapter (cs_frontend_dvb)

stv090x_attach: Trying to attach STV090x demodulator(1)

DVB: Unable to find symbol cx24116_attach()

avl2108_attach: Attaching AVL2108 demodulator(0)

DVB: registering adapter 0 frontend 0 (AVL2108 Demodulator)...

cnxt_sata version 2.3cs

scsi0 : cnxt_sata

ata1: SATA max UDMA/133 irq 42

scsi1 : cnxt_sata

ata2: SATA max UDMA/133 irq 35

ata2: SATA link down (SStatus 0 SControl 300)

ata1: SATA link down (SStatus 0 SControl 300)

starting /etc/init.d/S01mount ...

starting /etc/init.d/S50hostname ...

starting /etc/init.d/S51networking ...

Configuring network interfaces... ifup: option with empty value " hostname"

Starting ifplugd... vmac_mii_bus: probed

arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1)

Sat Jan 1 00:00:00 CET 2000

done.

starting /etc/init.d/S52syslogd ...

starting /etc/init.d/S60autofs ...

Jan 1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.20.2

starting the automounter...

starting /etc/init.d/S90inetd ...

Name server cannot be used, exiting 1 Jan 00:00:00 ntpdate[555]: name server cannot be used, reason: Temporary failure in name resolution

starting /etc/init.d/S95rescan-failed-drives ...

starting /etc/init.d/S96nfsd ...

starting /etc/init.d/S9A_rescue ...

ping: sendto: Network is unreachable

ping: sendto: Network is unreachable

ping: sendto: Network is unreachable

Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden

starting /etc/init.d/S9L_logomask ...

starting /etc/init.d/S9T_tuxcald ...

starting /etc/init.d/S9T_tuxmaild ...

Please press Enter to activate this console. Jan 1 00:00:01 coolstream daemon.err automount[563]: failed to load map, exiting

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

/var/plugins/operations camd_start

/var/plugins/operations rezap

[CBasicClient] connect failed.

/tmp/zapit.sock: No such file or directory

PHY: 0:09 - Link is Down

m_cBoxFrame.iHeight 645 m_cBoxFrameBrowserList.iHeight 322 m_settings.browserFrameHeight 50

avl2108_load_firmware: Waiting for firmware upload (dvb-fe-avl2108.fw)...

i2c i2c-0: firmware: requesting dvb-fe-avl2108.fw

avl2108_load_firmware: Waiting for firmware upload(2)...

avl2108_load_firmware: Firmware upload complete

[/home/image/coolstream/bs-cst-neutrino-hd/source/neutrino-hd/src/zapit/src/frontend.cpp:Open:191] /dev/dvb/adapter0/frontend1: No such file or directory

/var/tuxbox/config/zapit/myservices.xml: No such file or directory

cs_tsx_hsdp_set_port_speed: num: 594 denom: 7

/var/tuxbox/config/deepstandby.off failed: No such file or directory

00:00:10.950 [sectionsd] start

[0;33m[dvbsub @ 0x6dc1a0] Invalid extradata, subtitle streams may be combined!

00:00:10.980 [sectionsd] starting

[0m/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

00:00:11.022 00:00:11.024 freeSatThread::run:: starting, pid 629 (1175463008)

00:00:11.031 eitThread::run:: starting, pid 629 (1158685792)

00:00:11.032 timeThread::run:: starting, pid 629 (1150297184)

cnThread::run:: starting, pid 629 (1167074400)

00:00:11.075 timeThread: getting DVB time (isOpen 1)

00:00:11.554 [sectionsd] commandserviceChanged: Service change to b45803fb0001283d

00:00:11.562 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time 1

00:00:11.563 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)

00:00:11.576 timeThread: going to sleep 1 seconds, running 1 scanning 1

00:00:11.588 [sectionsd] commandserviceChanged: Service changed to b45803fb0001283d

00:00:11.604 timeThread: going to sleep for 1 seconds...

showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Das Erste HD.png

after showchannellogo, mode = 3 ret = 3 logo_ok = 1

00:00:12.614 timeThread: wakeup, running 1 scanning 1 channel 3fb0001283d reason 110

00:00:12.622 timeThread: getting DVB time (isOpen 1)

00:00:16.134 [sectionsd] commandserviceChanged: Service change to b45803fb0001283d

00:00:16.135 [sectionsd] commandserviceChanged: Service changed to b45803fb0001283d

rescanning /sys/class/scsi_host/host0

ata1: hard resetting link

logomask Version 1.2

ata1: SATA link down (SStatus 0 SControl 300)

ata1: EH complete

rescanning /sys/class/scsi_host/host1

ata2: hard resetting link

00:00:21.074 [sectionsd] commandserviceChanged: Service change to b45803fb0001283d

00:00:21.075 [sectionsd] commandserviceChanged: Service changed to b45803fb0001283d

ata2: SATA link down (SStatus 0 SControl 300)

ata2: EH complete

wget: can't connect to remote host (127.0.0.1): Network is unreachable

wget: can't connect to remote host (127.0.0.1): Network is unreachable

wget: can't connect to remote host (127.0.0.1): Network is unreachable

 

 

[ma_cst]

Alles wird gut ...

Mit einem anderen USB-Stick konnte ich kernel.img und system.img flashen.

Nach dem Reboot der Coolie mit einem WLAN-Stick (Edimax 150Mbps nano USB Adapter) im USB-Port im FontPanel konnte ich die Netwerkkonfiguration durchführen (wlan0, WLAN-Name, Paaswort, dhcp ein). Nach dem Speichern der Einstellungen wurde sofort eine Netzwerkverbindung hergestellt. :D

[ma_cst]

Nachdem ja der Stick mit dem Emergency-Flash unter dem Original CST-Image lief, habe ich nochmal das Keywelt Image V2.01 geflashed. Und jetzt funktioniert nach einigen Versuchen dort auch der WLAN-Stick (Edimax 150Mbps nano USB Adapter). Wichtig ist auf jeden Fall, dass man die Coolie lange genug ausgeschaltet und stromlos lässt, nachdem man die Schnittstelle auf wlan0 gestellt und die Konfiguration (WLAN-Name, WLAN-Passwort, dhcp ein) vorgenommen und (!!!) gespeichert hat.