shinzilla Geschrieben 18. Dezember 2011 Melden Share Geschrieben 18. Dezember 2011 Hallo, ich habe mal meine Dbox2 Nokia 2x entstaubt und reaktiviert. Leider bekomme ich egal mit welchem Image und mit welcher konstellation (mmc, mmc2, combo1, combo2 ...) meine mircosd Karte nicht zum laufen. Ausprobiert habe ich das aktuellste Keywelt image sowie ein älteres von 09/2009. Ich bekomme immer ähnliche fehler. MMC: Starting MMC-Support mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc2: Hardware init mmc: Card init mmc: Card init mmc: error in mmc_card_init (1) mmc: error in mmc_init (-1) Oops: kernel access of bad area, sig: 11 NIP: C000D988 XER: 00000000 LR: C000D97C SP: C1C1DDA0 REGS: c1c1dcf0 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 00000000, DSISR: C2000000 TASK = c1c1c000[48] 'rmmod' Last syscall: 129 last math 00000000 last altivec 00000000 GPR00: 00001032 C1C1DDA0 C1C1C000 00000001 00009032 00000001 C1BC9004 00001BC8 GPR08: C01E5330 C1C1DDD8 00000040 00000000 22004042 1007F4F0 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 01C1DF40 00000000 C0002AE8 GPR24: C1C1DE80 10003E4C C1C1DDD0 00000046 C0165374 C1C1DDD0 C0165360 C0165370 Call backtrace: 00000000 C0007638 C0060F64 C005B384 C3884698 C00112B8 C00113FC C000289C 00000880 1000A3D0 10003CA0 10003CD0 10003EB0 0FEDE6EC 00000000 Segmentation fault mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted rmmod: can't unload 'mmc2': unknown symbol in module, or unknown parameter mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc: can't get major 121 insmod: init_module: mmc2: Device or resource busy insmod: can't insert '/lib/modules/2.4.37.6-dbox2/misc/mmc2.o': Operation not permitted Starte Partitionsgröße ermitteln Swapsize ermitteln Ermittelter MMC Swapsize --> 32 MB MMC Startup failed IDE: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of IDE-Interface is at: 0xc38a4000 Probing IDE interface ide0... mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory hdparm: can't open '/dev/ide/host0/bus0/target0/lun0/disc': No such file or directory warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' Eine HDD habe ich nicht angeschlossen. Hatte aber mal gelesen das HDD enabled sein sollte. Auch läuft die Karte an sich in einem naderen System (mounten, formatieren usw). Das Modul welches ich habe ist folgendes: http://www.dbox2.net/html/nokia-ide-sata.html Vielleicht hat jemand das selbe Modul und kann mir ein paar Tips geben. Ich hoffe es ist nicht defekt! Grüße Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 18. Dezember 2011 Melden Share Geschrieben 18. Dezember 2011 Poste mal ein vollständiges Bootlog. Nicht dass die Box da irgendwo ein Problem hat. Läuft die Kiste ansonsten einwandfrei? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
shinzilla Geschrieben 19. Dezember 2011 Autor Melden Share Geschrieben 19. Dezember 2011 Nabend.. blöde Frage aber wie kann ich hier was anheften? Über "My Media"? Raff das nicht ganz... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
shinzilla Geschrieben 19. Dezember 2011 Autor Melden Share Geschrieben 19. Dezember 2011 Ach ich mach es einfach per copy / paste. debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-9a.87.1f.07.00.00-01 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 171660 verify sig: 262 Branching to 0x40000 U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . . | . / - . \ | / - \ done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ............................................................... done Un-Protected 63 sectors ### FS (squashfs) loading 'vmlinuz' to 0x200000 ### FS load complete: 671052 bytes loaded to 0x200000 ## Booting kernel from Legacy Image at 00200000 ... Image Name: Linux-2.4.37.6-dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 670988 Bytes = 655.3 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37.6-dbox2 (image@Server) (gcc version 3.4.6) #26 Sa Sep 26 14:37:12 CEST 2009 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex= Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:a8:ed loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.14.4 (2009-09-26 14:42:24 CEST) starting pid 8, tty '': '/etc/init.d/rcS' mount: using /etc/fstab ##### Image-Version: Keywelt_Sep2009_V1 ##### Sat Sep 26 14:57:00 UTC 2009 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: IDE-Interface detected, Vendor: DboxBaer or kpt.ahab/Stingray Starting MMC-Support mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $ mmc2: Hardware init mmc: Card init mmc: Card init *OK1* mmc: Card init *OK2* mmc: Media found Size = 992000, hardsectsize = 512, sectors = 1984000 Partition check: mmca: p1 Starte Partitionsgröße ermitteln Swapsize ermitteln Ermittelter MMC Swapsize --> 32 MB MMC mounted on /mnt/mmc Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of IDE-Interface is at: 0xc38a6000 Probing IDE interface ide0... mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory hdparm: can't open '/dev/ide/host0/bus0/target0/lun0/disc': No such file or directory warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 insmod: warning: kernel-module version mismatch dbox2_fp_input was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.6-dbox2 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av: AVIA 500 LB4 found, sptsfix is off avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1893)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ insmod: warning: kernel-module version mismatch multicam was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.6-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 starting pid 304, tty '': '/etc/init.d/start' Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.306 2009/09/14 13:33:28 seife Exp $ [sectionsd] Caching max 1500 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading. [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $ [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 /var/plugins/operations camd_start starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] ca system id: 1702 [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 1 onid 85 /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 /bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) [CVideo::setVideoFormat] output format: 4:3(LB) [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [yhttpd] Webserver starting... /var/plugins/operations sect_renice neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [sectionsd] getUTC: read: Connection timed out [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [rcinput] no file /var/tuxbox/config/rc.conf was found /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] found esound, adding to mainmenue/personalize [neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [neutrino] received 29 sats [neutrino] registering as event client [LCDFONT] FTC_Face_Requester (Fix15/Bold) [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' [basicsocket] receive timed out. waiting process 571 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything busy /tmp/zapit.sock [basicsocket] send_data: Broken pipe (n = 8/8, pid = 516) zap failed! [zapit] LOCK LOST! trying rezap... channel: 'Das Erste' Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
shinzilla Geschrieben 19. Dezember 2011 Autor Melden Share Geschrieben 19. Dezember 2011 Ich werd bekloppt! Jetzt wirds erkannt... Also ich komme mir grad voll verarscht vor... sorry für den vermutlich sinnlosen Post aber keine Ahnung was das war... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 19. Dezember 2011 Melden Share Geschrieben 19. Dezember 2011 Vielleicht war's ein Kontaktproblem vom Interface, weil die Box länger in der Abstellkammer schlummerte? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
lustisch Geschrieben 21. Dezember 2011 Melden Share Geschrieben 21. Dezember 2011 Ich werd bekloppt! Jetzt wirds erkannt... Also ich komme mir grad voll verarscht vor... sorry für den vermutlich sinnlosen Post aber keine Ahnung was das war... Hallo shinzilla, mit welchen Einstellungen hast du es zum laufen gebracht. Hab das selbbige Problem. Interessant wäre welchen Treiber du benutzt. Hab schon alle Möglichkeiten ausprobiert. Danke Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 22. Dezember 2011 Melden Share Geschrieben 22. Dezember 2011 Hi, @lustisch:m verwendest du auch eine Karte kleiner/gleich 1GB ? Weil grössere laufen sowieso nicht... Ansonsten: Bootlog machen. Ciao, DdD. PS: Auch alles richtig verkabelt? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.