Jump to content

Dbox flashen klappt nicht


Empfohlene Beiträge

Versuche eine DBox2 Nokia mit Hallenbergs Flash Assi / bzw. Bootmanager klappen nicht. Vorher war sportster image drauf. Das Image ist wohl geplatzt. Wollte nun neues Keywelt image draufmachen.

Problem:

DBox bootet nicht richtig hängt irgendwie fest. Bzw. ab und zu steht im Display "kein Sytem". Es kommt also gar nicht zum Flashvorgang. Was kann man noch machen. Außer Briefbeschwerer

Link zu diesem Kommentar
Auf anderen Seiten teilen

Versuche eine DBox2 Nokia mit Hallenbergs Flash Assi / bzw. Bootmanager klappen nicht. Vorher war sportster image drauf. Das Image ist wohl geplatzt. Wollte nun neues Keywelt image draufmachen.

Problem:

DBox bootet nicht richtig hängt irgendwie fest. Bzw. ab und zu steht im Display "kein Sytem". Es kommt also gar nicht zum Flashvorgang. Was kann man noch machen. Außer Briefbeschwerer

Mit welchem OS versuchst du zu flaschen? XP? VISTA? 7?

Netzwerkkarte eine feste IP gegeben? Firewall aus? Gekreuztes Lankabel?

Wenn die Box schon im Debug ist dann klappt es zu 99,9% so:

WIN XP feste IP vergeben zBsp. 192.168.1.2

gekreuztes Lan Kabel von PC auf DBox

Firewall ausschalten.

Windows neu starten.

Hallenberg Flaschassi starten und Keywelt Image auswahl 1xI für Sagem (schwarze Box mit Bmon 1.3) oder 2xI für Nokia und andere Sagem´s oder Philips.

Wähle Flashen ohne Nullmodemkabel. Box über Netzstecker Starten! (Reset klappt nicht!)

 

Viel Erfolg!

Link zu diesem Kommentar
Auf anderen Seiten teilen

Hallo anbei die Bootlogs, musste erstmal den alten PC aus dem Keller holen wg. Windows 7 auf neuem Rechner

 

Hallenbergs Flash Assistent:

¢debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-d3.e3.3c.07.00.00-14

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

debug: autoboot aborted from terminal

dbox2:root> boot net net net net net net net net net net

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

boot: elfcopy failed: 16

dbox2:root>

 

 

DBox Bootmanager

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-d3.e3.3c.07.00.00-14

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 171988

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.3.3 (Tuxbox) (Sep 26 2008 - 15:12:50)

 

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ... done.

env: found "console"

env: found "baudrate"

env: found "dbox_duplex"

env: found "lcd_inverse"

env: found "lcd_contrast"

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 770293 bytes loaded to 0x100000

## Booting kernel from Legacy Image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 770229 Bytes = 752.2 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.36-dbox2 (sportster@linux) (gcc version 3.4.4) #3 Sa 13. Dez 1

1:09:01 CET 2008

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock1 rootfstype=squashfs dbox_duplex=0 conso

le=ttyS0,9600

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30584k available (1316k kernel code, 408k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

Journalled Block Device driver loaded

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:76:a0

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00500000 : "root (squashfs)"

0x00500000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "flfs (u-boot)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.12.3 (2008-12-08 17:29:37 CET)

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

############## alternativer dvb-core.o! #################

insmod: warning: kernel-module version mismatch

/var/lib-misc/dvb-core.o was compiled for kernel version 2.4.35-dbox2

while this kernel is version 2.4.36-dbox2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

Vendor: Nokia

Model: D-BOX2

cam.c,v 1.31 13th of May satsuse

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av: $Id: avia_av_core.c === AVIA500 sptsfix is off

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/27 16:48:01 Papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

./var/etc/init.d/rcS.local: line 187: fbsplash: not found

Link zu diesem Kommentar
Auf anderen Seiten teilen

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Bringe Dein Netzwerk in Ordnung, es funktioniert nicht so, wie es muss. Und lese dazu auch den extra hier oben gepinnten Thread Was geht schief beim Flashen oder Debugmodus?, umsonst gibt es den nicht. :)

Link zu diesem Kommentar
Auf anderen Seiten teilen

Archiviert

Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...