cush Geschrieben 16. Juni 2009 Melden Share Geschrieben 16. Juni 2009 Hallo Community, Ich habe eine Nokia Box mit Kabel und einer Kabeldeutschland Karte. Es ist nur SCAM2 aktiviert sonst nichts. Heute habe ich die Box ganz normal hochgefahren und dann findet die kein Sender mehr, überall steht nur noch "Kanal zur Zeit nicht verfügbar". Wenn ich meinen Fernseher ohne die Box nutze bekomme ich aber ganz normal die Kabelkanäle. Nur die Box will nicht mehr. nun habe ich gerade das Mai 09 Image neu drauf geflasht in der Hoffnung es hilft, tat es aber leider nicht. Irgendwelche Ideen? Ich mein die Box gibt doch nicht von jetzt auf gleich den Geist auf, oder?!! Tuner hin? Über jede Hilfe bin ich Dankbar. Gruß, cush Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
GetAway Geschrieben 16. Juni 2009 Melden Share Geschrieben 16. Juni 2009 Du hast im Mai-Image aber eine Kanalsuche durchgeführt? Die Pre-Konfiguration löscht nämlich bei Kabelboxen den Zapit-Ordner, so das eine neue Kanalsuche angestoßen werden muss bzw. die *xml Dateien zurückgespielt werden sollten. Solltest Du bei durchgeschleiften Antennensignal ein mit dem TV-Tuner empfangenes verrauschtes Bild haben, hat es wohl deinen Tuner in der Box erwischt. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
cush Geschrieben 17. Juni 2009 Autor Melden Share Geschrieben 17. Juni 2009 Du hast im Mai-Image aber eine Kanalsuche durchgeführt? Die Pre-Konfiguration löschtnämlich bei Kabelboxen den Zapit-Ordner, so das eine neue Kanalsuche angestoßen werden muss bzw. die *xml Dateien zurückgespielt werden sollten. Solltest Du bei durchgeschleiften Antennensignal ein mit dem TV-Tuner empfangenes verrauschtes Bild haben, hat es wohl deinen Tuner in der Box erwischt. Hi, also ich hab eine Minimale Ahnung. Als ich einen Kanalsuchlauf durchführen wollte (hatte vorher nur meine xml Dateien in den Zapit Ordner kopiert) zeigte mir das Gerät Satelliten an bei der Suche. Also nicht die Kabelanbieter. Ich also im Systemmenü geschaut ob es sich verstellt hätte von Kabelempfang auf SAT Empfang. War aber nicht so, also noch mal neu eingestellt, reboot, gleiches Ergebnis. Aus irgendeinem Grund, ignoriert die Nokia Box nun die Einstellung ob ich Kabel oder SAT habe und demzufolge findet er dann keine Sender bzw. zeigt mir meine schon vorhandenen Sender nicht mehr an. Denke ich mir jedenfalls. Frage nun natürlich, wieso macht die Box das? Wieso passierte das von jetzt auf gleich und viel Wichtiger, wie behebe ich das Problem? Mit dem Tuner scheine ich wohl keine Probleme zu haben, das Problem welches Du mir schilderst habe ich nicht. Gruß, Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 17. Juni 2009 Melden Share Geschrieben 17. Juni 2009 Wenn Deine Kabelbox keinen Kabelsuchlauf zuläßt und nur Satelliten anzeigt, ist sie defekt, mit großer Wahrscheinlichkeit der Tuner hin. Meldet der sich nämlich nicht korrekt oder gar nicht, geht die Software immer von einer SAT-Box aus. Damit ist dann weder ein Kabelsuchlauf möglich, noch funktionieren fertige Kabel-Senderlisten. Poste bitte ein komplettes Bootlog vom Startvorgang der Box. Du benötigst dazu ein serielles Nullmodemkabel. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
cush Geschrieben 17. Juni 2009 Autor Melden Share Geschrieben 17. Juni 2009 Wenn Deine Kabelbox keinen Kabelsuchlauf zuläßt und nur Satelliten anzeigt, ist sie defekt, mit großer Wahrscheinlichkeit der Tuner hin. Meldet der sich nämlich nicht korrekt oder gar nicht, geht die Software immer von einer SAT-Box aus. Damit ist dann weder ein Kabelsuchlauf möglich, noch funktionieren fertige Kabel-Senderlisten. Poste bitte ein komplettes Bootlog vom Startvorgang der Box. Du benötigst dazu ein serielles Nullmodemkabel. Moin, anbei mein Bootlog: ------------------------------------------------------------------------------------------------------------------------ [sectionsd] getUTC: read: Connection timed out Údebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: unknown demodulatordebug: BMon V1.0 mID 01 debug: feID 00 gtxID 0b debug: fpID 5a dsID 01-be.20.1f.07.00.00-09 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 163284 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (May 23 2009 - 13:09:58) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . . | / . - \ | / . - \ done. env: found console with value ttyS0 env: found lcd_inverse with value 0 env: found lcd_contrast with value 15 FB: ready In: serial Out: serial Err: serial Net: SCC ETHERNET LCD: ready Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 670534 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 670470 Bytes = 654.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.37-dbox2 (image@Server) (gcc version 3.4.6) #14 Sa Mai 23 13:10:47 CEST 2009 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:19:68:4c loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2009-05-23 13:18:33 CEST) mount: using /etc/fstab ##### Image-Version: Keywelt_Mai2009_V1 ##### Sat May 23 13:47:00 UTC 2009 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: no IDE-Interface detected Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ DBox2 Multicam Driver v1.01 skars & doz21 Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.292 2009/05/05 18:57:39 rhabarber1848 Exp $ [sectionsd] Caching max 3500 events [sectionsd] Caching 2 days [sectionsd] Caching 18 hours Extended Text [sectionsd] Events are old 60min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading. [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.429k 2009/05/12 18:25:00 seife & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading. [frontend] uncommitted_switch_mode 0 auto_fec 0 [frontend.cpp:CFrontend:63] /dev/dvb/adapter0/frontend0: No such file or directory /var/tuxbox/config/zapit/services.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) /var/plugins/operations camd_start [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 4:3(LB) starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] ca system id: 1722 [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [yhttpd] Webserver starting... /var/plugins/operations sect_renice neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) starte scam starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [CVideo::setVideoFormat] output format: 4:3(LB) [neutrino] found esound, adding to mainmenue/personalize [neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument) [neutrino] setRepeat: delay=100 period=125 use kernel-repeat: no [neutrino] received 32 sats [neutrino] registering as event client [CVideo::setVideoFormat] output format: 4:3(LB) [sectionsd] getUTC: read: Connection timed out< Hoffe es hilft. Gruß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 17. Juni 2009 Admin Melden Share Geschrieben 17. Juni 2009 @cush debug: unknown demodulator Frontprozessor oder Tuner sind hinüber. Klick Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
cush Geschrieben 17. Juni 2009 Autor Melden Share Geschrieben 17. Juni 2009 @cush Frontprozessor oder Tuner sind hinüber. Klick Danke für die Antwort! Nun weiß ich was Sache ist und schau mal was ich nun mache. Besten Dank! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.