Ist die Box defekt?

[roggi01]

Hi Leute,

 

die Box Nokia (soll man diesen Namen aussprechen) 2x Kabel bleibt immer bei Lade Neutrino stehen.

 

Auf anraten von Cyres poste ich hier mal das BootLog. Vielleicht kann mir jemand von Euch sagen, was es damit auf sich hat.

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 162992

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.2.0 (Tuxbox) (Jan 18 2008 - 21:28:14)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . . | / . . - \ | / - \ done.

env: found "console"

env: found "lcd_inverse"

env: found "lcd_contrast"

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 669940 bytes loaded to 0x100000

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 669876 Bytes = 654.2 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.36-dbox2 (image@Server) (gcc version 3.4.6) #11 Fr Jan 18 21:28:45 CET 2008

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:b5:e9

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2008-01-18 21:32:56 CET)

 

 

##### Image-Version: Keywelt_Jan2008_V2 #####

 

Fri Jan 18 21:48:00 UTC 2008

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

DVB: VES1820(0): pwm=0x47 (user specified)

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.259 2008/01/12 16:57:22 seife Exp $

[sectionsd] Caching max 3000 events

[sectionsd] Caching 7 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[eitThread] pid 186 start

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

avia_gt_core: masking unhandled irq reg 0 bit 7

/var/plugins/operations camd_start

DBox2 Multicam Driver v1.01 skars & doz21

starte camd2

[camd2] EMM : active

[camd2] Socket=/tmp/camd.sock02

[camd] ca system id: 1702

Segmentation fault

Oops: kernel access of bad area, sig: 11

NIP: C004916C XER: 00000000 LR: C007AE6C SP: C1D01A20 REGS: c1d01970 TRAP: 0300 Not tainted

MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: 64A3BD53, DSISR: C2000000

TASK = c1d00000[167] 'start_neutrino' Last syscall: 195

last math 00000000 last altivec 00000000

GPR00: C1353A94 C1D01A20 C1D00000 C01228C8 C01246D4 00000293 0002F100 00000000

GPR08: 0002F1E1 64A3BD4F 000007FF C01FE830 000097A8 10080CB4 C1D01DA0 C1D01DE8

GPR16: C1D01DB0 C1429BA0 00000000 00000000 00000000 C1D01A65 C1D01DF0 C1429BFC

GPR24: 00000008 C1F08400 00000000 00000000 C0075EEC C1429BA0 C1429BD0 C1353A84

Call backtrace:

C1F08400 C007AE6C C003EE9C C003FB3C C003FF70 C0040160 C003BAE4

C000285C 0FED2AEC 1004AAA4 1004B51C 100482A4 1004A648 1004C9AC

10003D14 10003D4C 10003F0C 0FEB244C 00000000

Oops: kernel access of bad area, sig: 11

NIP: C00274D0 XER: 20000000 LR: C00274A8 SP: C1459E60 REGS: c1459db0 TRAP: 0300 Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: 017414E8, DSISR: C0000000

TASK = c1458000[275] 'operations' Last syscall: 42

last math 00000000 last altivec 00000000

GPR00: C018BF84 C1459E60 C1458000 00000001 00009032 00000000 C137B26C C126B100

GPR08: 1008EDE8 00000004 101358F4 017414D0 84004084 10080CB4 10080000 00000000

GPR16: 7FFFF560 00000002 7FFFF4D0 10080000 00009032 01459F40 C1459F28 C0002AA8

GPR24: C0002800 C0160000 00000044 FFFFFFE9 C137B200 000001F0 C018BF7C C018BF74

Call backtrace:

00001032 C004A8BC C004C200 C003E5C4 C0007A6C C000285C 10048840

10048A98 1004B430 100482A4 10048260 10048260 10048260 10048260

10048260 10048260 10048260 10048260 10048260 1004A0C0 100482A4

100482A4 10048260 10049FB4 100482A4 1004A648 1004C9AC 10003D14

10003D4C 10003F0C 0FEB244C 00000000

Oops: kernel access of bad area, sig: 11

NIP: C00274D0 XER: 20000000 LR: C00274A8 SP: C14FFE40 REGS: c14ffd90 TRAP: 0300 Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: 017414E8, DSISR: C0000000

TASK = c14fe000[197] 'timerd' Last syscall: 102

last math 00000000 last altivec 00000000

GPR00: C018BF84 C14FFE40 C14FE000 00000001 00009032 00000000 C14FFEE8 C126B100

GPR08: 00808080 00000004 101358F4 017414D0 24002028 1002D518 00000000 30019C34

GPR16: 300198F4 10025BD8 1000FFA4 00000004 00009032 014FFF40 00000000 C0002AA8

GPR24: C0002800 C14FFEE8 00000000 C017FBD0 FFFFFF9F 000001F0 C018BF7C C018BF74

Call backtrace:

00001032 C004A8BC C004C200 C00C2BEC C00C3718 C00C37CC C00C465C

C000285C 00000000 0FF8C6E4 0FFDA1B4 0FFDA2CC 10010038 0FDF8A1C

0FD0EB84

Segmentation fault

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

 

THX für Eure Mühe

 

Gruß

 

Roggi

[merkwuerden]

Entweder ist das Image beschädigt, oder die Box hat einen Defekt.

 

Flashe das Image bitte nochmal neu. Treten dann immer noch diese Probleme auf, ist die Box wohl ein Fall für die Werkstatt,

[roggi01]

Hi Merkwürden,

 

danke für Deine Antwort. Ich habe die Box jetzt schon einige Male geflasht, jedoch immer mit dem gleichen Ergebnis. Nach längere Pause vom Netz bootet sie 1x normal, dies aber äußerst selten. Scheint dann wohl doch ein Hardwareproblem zu sein. Ist der Fehler eingrenzbar? Und hat jemand vielleicht eine gute Werkstatt an der Hand, die DBoxen reparieren?

 

Gruß

 

Roggi

[cyres]

http://www.keywelt-board.com/index.php?showtopic=106922