halloworld Geschrieben 27. Mai 2006 Melden Share Geschrieben 27. Mai 2006 \debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: LCD init error -1 debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID Edit SnowHead: dsID immer überschreiben debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0052 will verify ELF image, start= 0x800000, size= 202740 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: . done. LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (cramfs) loading 'vmlinuz' to 0x100000 ### FS load compleate: 582941 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 582877 Bytes = 569 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.19 (tuxbox@linux) (gcc version 3.1) #1 Die Aug 6 13:53:36 CEST 2002 Wer Kernel nachmacht, oder faelscht, oder nachgemachte, oder falsche in Umlauf b ringt, wird mit alexW-Images nicht unter Basisimage 1.6 bestraft. Skars :-) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 console=ttyS0 Decrementer Frequency = 251625000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 66.56 BogoMIPS Memory: 30928k available (1016k kernel code, 360k data, 64k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module i2c-proc.o version 2.6.1 (20010825) CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:42:d1:b9 D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 7 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "flfs (ppcboot)" 0x00040000-0x00600000 : "root (cramfs)" 0x00600000-0x00700000 : "emu (jffs2)" 0x00700000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 64k init init started: BusyBox v0.60.2 (2002.08.17-23:19+0000) multi-call [i2c-8xx]: mpc 8xx i2c init i2c-core.o: adapter registered as adapter 0. [i2c-8xx]: adapter: 0 i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY event: init ... i2c-core.o: driver i2c saa7126 driver registered. i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0). i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [CXA2092] registered to adapter [](pos. 1). i2c-core.o: driver DBox2 Frontprocessor driver registered. i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2 ). AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $ avia_core.c: load_dram_image: Microcode verify: 5 errors. der moment ist gekommen... i2c-core.o: driver DBox2-CAM registered. CAM: attaching CAM at 0x6e i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3). CAM: attached to adapter write 1 event's ... write 1 event's ... mice: PS/2 mouse device common for all mice BusyBox v0.60.2 (2002.08.17-23:19+0000) multi-call binary Usage: busybox [function] [arguments]... or: [function] [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use, and BusyBox will act like whatever it was invoked as. Currently defined functions: [, ash, busybox, cat, chgrp, chmod, chown, clear, cp, date, dd, df, dmesg, du, echo, env, false, find, grep, gunzip, gzip, halt, hostname, ifconfig, init, kill, killall, klogd, ln, ls, mkdir, more, mount, mv, nslookup, ping, ps, pwd, reboot, reset, rm, rmdir, route, sed, sh, sleep, sync, syslogd, tail, tar, test, touch, true, umount, uname, uptime, vi, wget, which, xargs, yes, zcat lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 1 avia_gt_core: $Id: avia_gt_core.c,v 1.20A 2002/10/14 01:20:23 tmbinc Exp $ avia_gt_core: autodetecting chip type... AViA GTX found avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.14A 2002/07/15 18:32:03 Patch Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.91 2002/07/08 15:12:47 wjoost Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_dmx: Successfully loaded ucode V0.14 avia_gt_dmx: RISC mem map size: 2048 avia_gt_gv: $Id: avia_gt_gv.c,v 1.21 2002/07/21 15:16:22 waldi Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.14 2002/06/07 18:06:03 Jolt Exp $ avia_gt_capture: $Id: avia_gt_capture.c,v 1.21 2002/08/06 13:06:30 wjoost Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.27 2002/08/06 13:06:30 wjoost Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.18 2002/06/07 18:06:03 Jolt Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Init VES1893 Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... i2c-core.o: driver VES1893 DVB demodulator registered. [lcdd] month-skin not found -> using default... i2c-core.o: client [VES1893] registered to adapter [](pos. 4). [lcdd] load config initializing core...avia_gt_core: masking unhandled irq reg 0 bit 6 VES1893: attaching VES1893 at 0x10 to adapter adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) avia_gt_napi: $Id: avia_gt_napi.c,v 1.89 2002/06/11 20:35:43 Jolt Exp $ avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning... avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.15 2002/07/02 09:31:22 LazyT Exp $ avia_gt_vbi: got demux C-Cube - AViA eNX/GTX $Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $ caching 504 hours events are old 60min after their end time avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.33 2002/07/19 22:59:21 waldi Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device [camd] 1.CMD-Class 0xE0 [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] no card is in slot #2 [camd] no card is in slot #1 [camd] card_country: [camd] card_number: [camd] card_version: ffff CXA2092 found CXA2092 found $Id: zapit.cpp,v 1.193G 2002/10/17 00:44:19 Homar (gbox Version) Exp $ [zapit] Using /var/keys/camd for Emu mode. [camd] no card is in slot #2 [camd] no card is in slot #1 [getservices.cpp] going to parse satellite Astra 19.2E [zapit] reading Bouquets ...................... [zapit] Found 23 bouquets. [zapit] channels have been loaded succesfully Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $ [controld] Boxtype detected: (01, 1, 1, Nokia) set event: 00000009 [nhttpd] Neutrino HTTP-Server starting.. [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.308.032 2002/10/14 22:42:18 (gbox Ve rsion) Exp $ [neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] ( Keyeditor+gboxMenu) [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created 1024k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [neutrino] gbox Menu / gbox Info / Keyedit Feature enabled ! IP : 172.68.16.50 Netmask : 255.255.255.0 Broadcast: 172.68.16.255 Gateway : 192.168.1.1 [neutrino] menue setup [CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/ [CHTTPUpdater] Image-Filename: cdk.cramfs [CHTTPUpdater] Version-Filename: cdk.cramfs.version [neutrino] control event register [neutrino] sectionsd event register [neutrino] zapit event register [neutrino] timerd event register [CFrontend::getEvent] timeout [zapit] tune retry 0 [CFrontend::getEvent] timeout [zapit] tune retry 1 [CFrontend::getEvent] timeout [zapit] tune retry 2 [CFrontend::getEvent] timeout [zapit] tune retry 3 [CFrontend::getEvent] timeout [zapit] tune retry 4 [CFrontend::getEvent] timeout zap failed! initial zap failed - rezap [CFrontend::getEvent] timeout [zapit] tune retry 0 [CFrontend::getEvent] timeout [zapit] tune retry 1 [CFrontend::getEvent] timeout [zapit] tune retry 2 [CFrontend::getEvent] timeout [zapit] tune retry 3 [CFrontend::getEvent] timeout [zapit] tune retry 4 [CFrontend::getEvent] timeout zap failed! das steht in log vom boot manager lässt sich aber nicht ansprechen über schnittstellen zum neuflashen Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 27. Mai 2006 Admin Melden Share Geschrieben 27. Mai 2006 @halloworld Schade, daß Du Dir vor dem Posten nicht die Mühe gemacht hast, wenigstens 5 Minuten in dem Forum zu lesen, in welches Dein Posting eigentlich gehört und wo ich es dann auch hinschieben darf. Dann wüßtest Du, daß man dsID's nicht postet, was bei der Fehler- meldung "boot net failed" zu tun ist und daß Anfänger besser mit dem Flash-Assistenten flashen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
halloworld Geschrieben 27. Mai 2006 Autor Melden Share Geschrieben 27. Mai 2006 geht wieder nach 5 mal flashen :-)) Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.