D-Box 2 Sagem immer wieder Kanäle weg !

[Gast Kroatien]

Moin,

ich habe heute eine Box bekommen (Sagem D-Box2 2x) die ich von einem

anderen Board (MD-Board) gekauft habe, soblad ich die Box abschalte (DEEP)

und sie wieder Starte sind alle Kanäle weg !!!

Dann kann ich auch im Menue kein DiSEqC mehr auswählen ! Findet dann

auch bei eine Kanalsuche keine Sateliten ! Was kann das sein ??

 

Kann jemand helfen ????

 

Gruß.....

[Tunina]

So etwas kommt vor. Bei mir wars gestern auch der Fall. Wenn auch etwas anders. http://www.keywelt-board.com/index.php?showtopic=67032&st=20

 

Sichere Dein altes Image und flash das KW V5 Image. Oder hast Du das bereits gemacht?

[Gast Kroatien]

Moin,

erst mal danke für die antwort, aber es hilft leider nicht weiter !

Keywelt Image habe ich natürlich auch probiert !

Was mir jetzt aufgefallen ist, wenn ich den Stecker ziehe sind die

Kanäle wieder da ! Schon eigenartig !!!

 

Hat jemand noch eine idee ????

 

Gruß......

[Gast Kroatien]

Moin,

und hat keiner eine idee ?? Also wie gesagt es ist nur wenn ich in Deep Standdby

runter fahre ! Fahre ich die Box normal über FB hoch sind keine Kanäle mehr

da,als wenn sie alles gelöscht hat! Ziehe ich dann den Stecker sind alle wieder da!?

 

Keiner eine Ahnung was das sein kann ????

 

Gruß.......

[Worschter]

Hi,

 

schau mal was passiert, wenn Du nach dem Hochfahren in telnet folgendes einggibts:

 

pzapit -kill

zapit -u

 

jetzt nen Moment warten bis ein paar Ausgaben kommen, etwa 5-10Sekunden.

dann eingeben:

 

pzapit -rn

 

poste mal was dabei dann angezeigt wird.

[Gast Kroatien]

Moin,

@worschter

so habe ich mal gemacht,das kommt dabei raus ! Ist aber das MD Image,werde

jetzt erst mal das Keywelt noch mal drauf machen ! Aber vielleicht kannst Du

ja schon was damit anfangen ?

 

Gruß....

 

/var # pzapit -kill

zapit shot down

/var # zapit -u

$Id: zapit.cpp,v 1.386 2006/01/22 13:16:29 carjay Exp $

[zapit] PMT update enabled

/var # pzapit -rn

registering neutrino

/var #

[Gast Kroatien]

@ worschter,

so nun mal mit dem Keywelt Image :

 

/var # pzapit -kill

zapit shot down

/var # zapit -u

$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[getservices] /var/tuxbox/config/zapit/myservices.xml  found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[getservices] dup transponder id 457 onid 1

/var # pzapit -rn

registering neutrino

/var #

 

Sagt das etwas aus ?? Danke schon mal für Deine Mühe !!!!

[Gast Kroatien]

Ich noch mal,

 

so nun das gleiche noch mal, aber das ist die geschichte mit den nicht

gefundenen Kanälen wenn ich aus dem Deep-Stanby hochfahre :

 

/var # pzapit -kill

zapit shot down

/var # zapit -u

$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[getservices] /var/tuxbox/config/zapit/myservices.xml  found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[getservices] dup transponder id 457 onid 1

[audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: Device or resource busy

/var # pzapit -rn

registering neutrino

/var #

 

Ziehe ich dann den Stecker klappt es wieder........

 

Gruß.....

[Worschter]

ups nun bin ich mal nen Stündchen weggepennt

 

also bis auf das letzte :

[audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: Device or resource busy

 

steht ansich nix wirklich interessantes bei.

 

 

Vielleicht wäre mal ein kompletter Bootlog aussagekräftiger, also wenn die Box mal keine Kanäle findet.

[Gast Kroatien]

Moin,

 

@Worschter, hier mal ein Bootlog wo er KEINE Kanäle findet :

 

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o

Using /lib/modules/2.4.31-dbox2/misc/avia_av.o

avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $

Machine check in kernel mode.

Caused by (from SRR1=1032): Transfer error ack signal

Oops: machine check, sig: 7

NIP: C38AD0B8 XER: 20000000 LR: C38AD088 SP: C1C25D70 REGS: c1c25cc0 TRAP: 0200

  Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

TASK = c1c24000[52] 'insmod' Last syscall: 128

last math 00000000 last altivec 00000000

GPR00: 00000000 C1C25D70 C1C24000 00000001 00000000 C38B5000 C1C3AAAC FDFFE000

GPR08: C1C3AAC0 C38B5000 C38B0000 C38B5000 48008024 1007DF94 10060000 00000001

GPR16: 10070000 1014A120 10149DD8 1014A628 00009032 C1C25EA0 C1B06000 C38B0000

GPR24: C1C3AA60 00000007 C38B3000 C01395C8 00000000 00000080 C0140000 C38AD000

Call backtrace:

00000007 C38AD8E0 C38AF7CC C0010FF4 C000285C 7FFFD110 10024200

10004150 10003D68 0FEC2FAC 00000000

Bus error

Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Using /lib/modules/2.4.31-dbox2/mavia_av_core: Starting avia_gt_wdt thread.

isc/avia_gt_fb.o

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

Using /lib/modules/2.4.31-dbox2/misc/lcd.o

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/at76c651.o

Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o

DVB: registering frontend 0:0 (VES1993)...

Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o

Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o

cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

 

Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o

 

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970

/var/plugins/operations logcs_init

Mon Mar 13 10:14:14 2006

$Id: sectionsd.cpp,v 1.217 2006/02/08 21:15:50 houdini Exp $

caching 50 hours

events are old 120min after their end time

minutes between timeset 30

/var/plugins/operations camd_init

$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

/var/plugins/operations cardserver_start

/var/plugins/operations camd_start

Using /var/modules/multicam.o

insmod: Warning: kernel-module version mismatch

        /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2

        while this kernel is version 2.4.31-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starte camd37xx

/var/plugins/operations check_camd3_socket

<14>13.03.2006 10:14:25 camd3: BOXTYPE:  1

<14>13.03.2006 10:14:25 camd3: LOG:  6

<14>13.03.2006 10:14:25 camd3: UDP_PORT:  24141

<14>13.03.2006 10:14:25 camd3: original slot au on

<14>13.03.2006 10:14:25 camd3: HTTP_PORT:  9080

<14>13.03.2006 10:14:25 camd3: LOG_HOST:  :514

<14>13.03.2006 10:14:25 camd3: DNS_CACHE:  600 sec

<14>13.03.2006 10:14:25 camd3: SOCKET:  /tmp/camd.sock01

<14>13.03.2006 10:14:25 camd3: KEYS:    /var/keys/camd3.keys

<14>13.03.2006 10:14:25 camd3: SERVERS:  /var/keys/camd3.servers

<14>13.03.2006 10:14:25 camd3: USERS:  /var/keys/camd3.users

avia_gt_ucode: pid 0001 not found

<14>13.03.2006 10:14:26 camd3: /var/keys/camd3.servers: HOST=192.168.0.42 PORT=2

4140

<14>13.03.2006 10:14:26 camd3: original slot: CAID=1702

 

<14>13.03.2006 10:14:26 camd3: USER=name1 PASS=pass1 SERVICES=all

<14>13.03.2006 10:14:26 camd3: KeyDB: gestartet

<14>13.03.2006 10:14:26 camd3: camd v3.840c - erfolgreich gestartet

<14>13.03.2006 10:14:26 camd3: HTTP: started on port 9080

[getservices] /var/tuxbox/config/zapit/myservices.xml  found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[getservices] dup transponder id 457 onid 1

Machine check in kernel mode.

Caused by (from SRR1=1032): Transfer error ack signal

Oops: machine check, sig: 7

NIP: C38AD0B8 XER: 20000000 LR: C38AD088 SP: C180DE10 REGS: c180dd60 TRAP: 0200

  Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

TASK = c180c000[334] 'zapit' Last syscall: 54

last math 00000000 last altivec 00000000

GPR00: 00000000 C180DE10 C180C000 00000001 000000E0 20006F06 00000000 C3B439E8

GPR08: 0FD6E640 C38B5000 C38B0000 C38B5000 84002028 10035478 00000000 00000000

GPR16: 00000000 00000000 00000000 00000000 00009032 0180DF40 C3B439E8 C17D6350

GPR24: C137B4E0 00000001 00000000 00000000 000000E0 00000000 00000000 00000000

Call backtrace:

C003D9C8 C3B43EC0 C38895E4 C3884368 C0042B5C C000285C 00000000

100136D0 100137A0 1000F33C 10011C20 0FCB8FAC 00000000

$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

 

[controld] Boxtype detected: (3, Sagem D-BOX2)

Machine check in kernel mode.

Caused by (from SRR1=1032): Transfer error ack signal

Oops: machine check, sig: 7

NIP: C38AD0B8 XER: 00000000 LR: C38AD088 SP: C15E5DB0 REGS: c15e5d00 TRAP: 0200

  Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

TASK = c15e4000[336] 'controld' Last syscall: 54

last math 00000000 last altivec 00000000

GPR00: 00000003 C15E5DB0 C15E4000 00000001 000003B0 C15E5E14 C15E5E50 C3B4335C

GPR08: 00000000 C38B5000 C38B0000 C38B5000 84002028 1001F198 00000000 00000000

GPR16: 00000000 00000000 00000000 00000000 00009032 015E5F40 C3B4335C C15664A0

GPR24: C13E4C30 00000002 00000000 C15E5E14 000003B0 00000000 400C6F37 C15E5E50

Call backtrace:

C15E5DB4 C38AF5E4 C3B4368C C38895E4 C3884368 C0042B5C C000285C

7FFFFDC0 10004B58 10005328 10004668 0FC64FAC 00000000

[nhttpd] Neutrino HTTP-Server starting..

/var/plugins/operations sect_renice

/var/plugins/operations epg_reinit

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: Connection refused

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: Connection refused

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: Connection refused

broke /tmp/zapit.sock

starte epg_watchdog

dbox2 watchdog v0.81 by bsdice

[timeThread] time(): 13.03.2006 10:29:03, tim: Mon Mar 13 10:29:03 2006

$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

/dev/input/event1: No such file or directory

[neutrino] menue setup

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[neutrino] received 0 sats

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[neutrino] registering as event client

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[getservices] /var/tuxbox/config/zapit/myservices.xml  found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[getservices] dup transponder id 457 onid 1

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[CBasicClient] connect failed: /tmp/zapit.sock

/tmp/zapit.sock: No such file or directory

[audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: Device or resource busy

[CBasicClient] connect failed: /tmp/controld.sock

/tmp/controld.sock: Connection refused

[neutrino] initialized everything

registering neutrino

 

 

Mache gleich eins mit Stecker Raus wo er dann Kanäle findet !

Ich hoffe das ist richtig so !?

[Gast Kroatien]

So, hier ein Bootlog nach dem ich den Stecker Rein stecke :

 

debug: feID 00    enxID 03

debug: fpID 52    dsID xx-xx.xx.xx.xx.xx.xx-xx

debug: HWrev 01  FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0040

 

will verify ELF image, start= 0x800000, size= 153668

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.1.2 (Tuxbox) (Dec 28 2005 - 01:56:29)

 

CPU:  PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Sagem, BMon V1.0

      Watchdog enabled

I2C:  ready

DRAM:  32 MB

FLASH:  8 MB

Scanning JFFS2 FS: ... done.

FB:    ready

LCD:  ready

In:    serial

Out:  serial

Err:  serial

Net:  SCC ETHERNET

 

Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 666402 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

  Image Name:  dbox2

  Image Type:  PowerPC Linux Kernel Image (gzip compressed)

  Data Size:    666338 Bytes = 650.7 kB

  Load Address: 00000000

  Entry Point:  00000000

  Verifying Checksum ... OK

  Uncompressing Kernel Image ... OK

Linux version 2.4.31-dbox2 (image@tower) (gcc version 3.4.4) #2 Mi Dez 28 02:33:

07 CET 2005

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:30:c0:f3

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00540000 : "root (squashfs)"

0x00540000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "flfs (u-boot)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started:  BusyBox v1.01 (2005.12.28-01:21+0000) multi-call bUsing /lib/modu

les/2.4.31-dbox2/misc/event.o

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o

Using /var/modules/dvb-core.o

Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o

Using /lib/modules/2.4.31-dbox2/misc/avs.o

Using /lib/modules/2.4.31-dbox2/misc/saa7126.o

Detected STB:

  Vendor: Sagem

  Model: D-BOX2

Using /lib/modules/2.4.31-dbox2/misc/cam.o

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o

Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o

Using /lib/modules/2.4.31-dbox2/misc/avia_av.o

avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Using /lib/modules/2.4.31-dbox2/mavia_av_core: Starting avia_gt_wdt thread.

isc/avia_gt_fb.o

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

Using /lib/modules/2.4.31-dbox2/misc/lcd.o

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

Using /lib/modules/2.4.31-dbox2/misc/at76c651.o

Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o

DVB: registering frontend 0:0 (VES1993)...

Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o

Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o

cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

 

Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o

Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o

 

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970

/var/plugins/operations logcs_init

Mon Mar 13 10:28:07 2006

$Id: sectionsd.cpp,v 1.217 2006/02/08 21:15:50 houdini Exp $

caching 50 hours

events are old 120min after their end time

minutes between timeset 30

/var/plugins/operations camd_init

$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

/var/plugins/operations cardserver_start

/var/plugins/operations camd_start

Using /var/modules/multicam.o

insmod: Warning: kernel-module version mismatch

        /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2

        while this kernel is version 2.4.31-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starte camd37xx

/var/plugins/operations check_camd3_socket

<14>13.03.2006 10:28:18 camd3: BOXTYPE:  1

<14>13.03.2006 10:28:18 camd3: LOG:  6

<14>13.03.2006 10:28:18 camd3: UDP_PORT:  24141

<14>13.03.2006 10:28:18 camd3: original slot au on

<14>13.03.2006 10:28:18 camd3: HTTP_PORT:  9080

<14>13.03.2006 10:28:18 camd3: LOG_HOST:  :514

<14>13.03.2006 10:28:18 camd3: DNS_CACHE:  600 sec

<14>13.03.2006 10:28:18 camd3: SOCKET:  /tmp/camd.sock01

<14>13.03.2006 10:28:18 camd3: KEYS:    /var/keys/camd3.keys

<14>13.03.2006 10:28:18 camd3: SERVERS:  /var/keys/camd3.servers

<14>13.03.2006 10:28:18 camd3: USERS:  /var/keys/camd3.users

<14>13.03.2006 10:28:18 camd3: /var/keys/camd3.servers: HOST=192.168.0.42 PORT=2

4140

<14>13.03.2006 10:28:19 camd3: original slot: CAID=1702

 

<14>13.03.2006 10:28:19 camd3: USER=name1 PASS=pass1 SERVICES=all

<14>13.03.2006 10:28:19 camd3: KeyDB: gestartet

<14>13.03.2006 10:28:19 camd3: camd v3.840c - erfolgreich gestartet

<14>13.03.2006 10:28:19 camd3: HTTP: started on port 9080

[getservices] /var/tuxbox/config/zapit/myservices.xml  found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[getservices] dup transponder id 457 onid 1

$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

 

[controld] Boxtype detected: (3, Sagem D-BOX2)

[nhttpd] Neutrino HTTP-Server starting..

[LCDFONT] initializing core.../var/plugins/operations sect_renice

/var/plugins/operations epg_reinit

 

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

starte epg_watchdog

dbox2 watchdog v0.81 by bsdice

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] enable flash

[basicsocket] send_data: Resource temporarily unavailable

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[timeThread] time(): 13.03.2006 10:43:00, tim: Mon Mar 13 10:43:00 2006

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[basicsocket] send_data: Resource temporarily unavailable

/dev/input/event1: No such file or directory

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] menue setup

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] received 33 sats

[neutrino] registering as event client

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] initialized everything

PES, queue 0 normal.

[CBasicClient] connect failed: /tmp/camd.socket

/tmp/camd.socket: No such file or directory

[CBasicClient] connect failed: /tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)

 

Evtl. kann man ja damit etwas anfangen ?

Auf jeden Fall schon mal danke für Deine (Eure) Hilfe und Mühe !!!!

 

Gruß......

[Gast Kroatien]

Moin,

mal hochschieben, vielleicht weiß ja doch jemand was ??

 

Gruß.....

[Worschter]

hm,

 

irgendwas verusacht nen Fehler, aber da kenn ich mich nicht wirklich mit aus.

Wenn Du die Box resettest mit on/off Button und Pfeil nach oben Taste und die Pfeil Taste gedrückt hälst,

dann macht sie nen Check, poste mal das Log davon.

 

Wenn ich könnte, dann würd ich die Box aber zurückgeben ehrlich gesagt.

[Gast Kroatien]

Hi,

alles klar danke für Deine mühe !!!!!!!!!

 

Werde den verkäufer dann mal anschreiben !

Das Log kann ich erst morgen machen,habe die Box im Moment

nicht dran und meine Frau schaut gerade Fern........ (Sagt ja alles )

 

Gruß.......

[Gast Kroatien]

Moin,

so hier noch das Log mit Pfeil nach oben Taste :

 

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.0  mID 03

debug: feID 00    enxID 03

debug: fpID 52    dsID xx-xx.xx.xx.xx.xx.xx-xx

debug: HWrev 01  FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

debug: &_text 0x10000, &_etext 0x262d8, &_data 0x262d8, &_edata 0x29dc8

debug: &_end 0x34d54,  &__stack 0x400000

debug: Memory tests (0x400000 -- 0x2000000)

debug: NumberTest: debug: passed

debug: MarchTest: debug: passed

debug: PermTest:  debug: passed

dbox2:root>

 

Sieht aber wie ich es sehe auch "normal" aus !

 

Gruß........