Box bleibt beim startlogo stehen

linuxe · 16. Juni 2005

habe meine 1x intel sagem in den debug modus gebracht und geflasht mit dem bootsmanager.hat alles soweit geklappt und nun bleibt die box beim startlogo hängen und geht dann aus.

was könnte da sein ?

Modern World · 16. Juni 2005

hast Du nur einmal geflasht? Wenn ja, würde ich

es noch einge Male versuchen. Achja, das richtige

Img 1xI sollte es auch sein.

Könnte auch das Netzteil was abhaben?

linuxe · 16. Juni 2005

habe mehrfach geflasht und flash läßt sich auslesen.

weis keinen rat zur zeit.

16. Juni 2005

hast du ein anderes Image zur hand ???? Wirf das mal auf die Box...

Modern World · 16. Juni 2005

dann könnte Hardwareseitig etwas dran sein.

linuxe · 16. Juni 2005

habe ein anderes image genommen -so sieht der log aus wenn ich die box boote.

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

Scanning JFFS2 FS: ... done.

Options:

1: console on ttyS0

2: console on fb0

3: console on null

Select option (1-3), other keys to stop autoboot: 0

### FS (cramfs) loading 'vmlinuz' to 0x100000

### FS load complete: 618889 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 618825 Bytes = 604.3 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.25-dbox2 (root@mh) (gcc version 3.2.3) #15 Sat Feb 21 15:55:32

MSK 2004

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock3 rootfstype=squashfs console=ttyS0

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30872k available (1064k kernel code, 372k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3b:b9:fb

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

CFI: Found no D-Box 2 flash memory device at location zero

D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode

Intel/Sharp Extended Query Table at 0x0031

cfi_cmdset_0001: Erase suspend on write enabled

Using buffer write method

Creating 7 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x000e0000 : "boot (cramfs)"

0x000e0000-0x00640000 : "root (squashfs)"

0x00640000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

Linux video capture interface: v1.00

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.00-pre8 (2004.03.07-13:49+0000) multi-cUsing /lib/modu

les/2.4.25-dbox2/misc/tuxbox.o

Detected STB:

Vendor: Sagem

Model: D-BOX2

Using /lib/modules/2.4.25-dbox2/misc/dvb-core.o

Using /lib/modules/2.4.25-dbox2/misc/dbox2_i2c.o

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

Using /lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o

Using /lib/modules/2.4.25-dbox2/misc/event.o

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp.o

Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_input.o

Using /lib/modules/2.4.25-dbox2/misc/at76c651.o

Using /lib/modules/2.4.25-dbox2/misc/ves1x93.o

Using /lib/modules/2.4.25-dbox2/misc/avs.o

Using /lib/modules/2.4.25-dbox2/misc/saa7126.o

Using /lib/modules/2.4.25-dbox2/misc/cam.o

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

Using /lib/modules/2.4.25-dbox2/misc/lcd.o

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

Using /lib/modules/2.4.25-dbox2/misc/avia_av.o

avia_av: $Id: avia_av_core.c,v 1.90 2004/03/17 10:44:15 diemade Exp $

avia_av: microcode verify: 5789 errors.

avia_av: timeout waiting for decoder init to complete. (00000001)

insmod: init_module: avia_av: Input/output error

Using /lib/modules/2.4.25-dbox2/misc/avia_gt.o

insmod: unresolved symbol avia_av_set_stc

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_fb.o

insmod: unresolved symbol avia_gt_gv_copyarea

insmod: unresolved symbol avia_gt_gv_show

insmod: unresolved symbol avia_gt_gv_get_clut

insmod: unresolved symbol avia_gt_gv_get_blevel

insmod: unresolved symbol avia_gt_gv_set_input_size

insmod: unresolved symbol avia_gt_gv_set_pos

insmod: unresolved symbol avia_gt_gv_hide

insmod: unresolved symbol avia_gt_get_info

insmod: unresolved symbol avia_gt_gv_set_size

insmod: unresolved symbol avia_gt_gv_set_input_mode

insmod: unresolved symbol avia_gt_gv_set_clut

insmod: unresolved symbol avia_gt_gv_set_blevel

insmod: unresolved symbol avia_gt_gv_get_info

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_lirc.o

insmod: unresolved symbol avia_gt_ir_exit

insmod: unresolved symbol avia_gt_ir_receive_pulse

insmod: unresolved symbol avia_gt_ir_receive_data

insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position

insmod: unresolved symbol avia_gt_ir_send_buffer

insmod: unresolved symbol avia_gt_ir_queue_pulse

insmod: unresolved symbol avia_gt_ir_init

insmod: unresolved symbol avia_gt_ir_set_duty_cycle

insmod: unresolved symbol avia_gt_ir_set_frequency

insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_oss.o

insmod: unresolved symbol avia_av_set_sample_rate

insmod: unresolved symbol avia_gt_pcm_play_buffer

insmod: unresolved symbol avia_gt_pcm_stop

insmod: unresolved symbol avia_gt_pcm_set_signed

insmod: unresolved symbol avia_gt_pcm_set_endian

insmod: unresolved symbol avia_gt_pcm_set_rate

insmod: unresolved symbol avia_gt_pcm_set_width

insmod: unresolved symbol avia_gt_pcm_poll

insmod: unresolved symbol avia_gt_pcm_set_channels

insmod: unresolved symbol avia_av_get_sample_rate

insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation

insmod: unresolved symbol avia_gt_pcm_get_block_size

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_v4l2.o

insmod: unresolved symbol avia_gt_pig_show

insmod: unresolved symbol avia_gt_pig_set_stack

insmod: unresolved symbol avia_gt_pig_set_size

insmod: unresolved symbol avia_gt_pig_set_pos

insmod: unresolved symbol avia_gt_pig_hide

Using /lib/modules/2.4.25-dbox2/misc/avia_napi.o

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

DVB: registering frontend 0:0 (Atmel AT76C651A with DAT7021(TUA6010XS))...

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

Using /lib/modules/2.4.25-dbox2/misc/cam_napi.o

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

Using /lib/modules/2.4.25-dbox2/misc/avia_av_napi.o

insmod: unresolved symbol avia_av_stream_type_set

insmod: unresolved symbol avia_av_register_video_event_handler

insmod: unresolved symbol avia_av_set_audio_attenuation

insmod: unresolved symbol avia_av_write

insmod: unresolved symbol avia_av_pid_set

insmod: unresolved symbol avia_av_audio_pts_to_stc

insmod: unresolved symbol avia_gt_dmx_queue_write

insmod: unresolved symbol avia_gt_dmx_enable_clip_mode

insmod: unresolved symbol avia_gt_dmx_disable_clip_mode

insmod: unresolved symbol avia_av_play_state_set_video

insmod: unresolved symbol avia_av_unregister_video_event_handler

insmod: unresolved symbol avia_av_get_video_size

insmod: unresolved symbol avia_av_play_state_set_audio

insmod: unresolved symbol avia_av_read

insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation

insmod: unresolved symbol avia_av_new_audio_config

insmod: unresolved symbol avia_av_set_video_system

insmod: unresolved symbol avia_av_bypass_mode_set

insmod: unresolved symbol avia_av_sync_mode_set

insmod: unresolved symbol avia_gt_dmx_queue_nr_get_bytes_free

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_napi.o

insmod: unresolved symbol avia_gt_dmx_get_ucode_info

insmod: unresolved symbol avia_gt_vbi_start

insmod: unresolved symbol avia_gt_dmx_queue_reset

insmod: unresolved symbol avia_av_napi_decoder_stop

insmod: unresolved symbol avia_gt_dmx_ecd_reset

insmod: unresolved symbol avia_gt_dmx_queue_stop

insmod: unresolved symbol avia_gt_dmx_queue_irq_enable

insmod: unresolved symbol avia_gt_dmx_set_pcr_pid

insmod: unresolved symbol avia_gt_vbi_stop

insmod: unresolved symbol avia_gt_dmx_free_section_filter

insmod: unresolved symbol avia_av_audio_pts_to_stc

insmod: unresolved symbol avia_gt_dmx_queue_write

insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext

insmod: unresolved symbol avia_gt_dmx_enable_clip_mode

insmod: unresolved symbol avia_gt_dmx_disable_framer

insmod: unresolved symbol avia_gt_dmx_set_pid_table

insmod: unresolved symbol avia_gt_dmx_disable_clip_mode

insmod: unresolved symbol avia_gt_dmx_ecd_set_key

insmod: unresolved symbol avia_av_napi_decoder_start

insmod: unresolved symbol avia_gt_dmx_alloc_section_filter

insmod: unresolved symbol avia_gt_dmx_queue_start

insmod: unresolved symbol avia_gt_get_info

insmod: unresolved symbol avia_gt_dmx_ecd_set_pid

insmod: unresolved symbol avia_gt_dmx_enable_framer

insmod: unresolved symbol avia_gt_dmx_alloc_queue_video

insmod: unresolved symbol avia_gt_dmx_free_queue

insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio

insmod: unresolved symbol avia_gt_dmx_alloc_queue_user

insmod: unresolved symbol avia_gt_accel_crc32

Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_proc.o

insmod: unresolved symbol avia_gt_dmx_ecd_reset

insmod: unresolved symbol avia_gt_dmx_ecd_set_key

insmod: unresolved symbol avia_gt_get_info

Using /lib/modules/2.4.25-dbox2/misc/emlog.o

emlog: version 0.40 rev. s running, using major number 241

Using /lib/modules/2.4.25-dbox2/misc/camd.o

[camd-cardserver.o] compiled Feb 21 2004, 19:18:42

[camd-cardserver.o] ioport base = ff000950

[camd-cardserver.o] commproc base = ff0009c0

Please press Enter to activate this console. + cp /var/keys/irdeto /tmp/irdeto

+ cp /var/keys/seca /tmp/seca

+ cp /var/keys/via /tmp/via

+ cp /var/keys/nagra /tmp/nagra

+ cp /var/keys/conax /tmp/conax

+ cp /var/keys/SoftCam.Key /tmp/SoftCam.Key

+ cp /var/keys/Conax.Key /tmp/Conax.Key

Using /var/bin/multicam.o

DBox2 Multicam Driver v1.01 skars & doz21

[cardserver 04:46:58] compiled Apr 9 2004, 09:06:07

[cardserver 04:46:58] Error opening config file /var/tuxbox/config/cardserv.cfg.

: not found/start_enigma: 8:

--- EMUD v 1.39 by [ruDREAM team] ---

--- all ok ---

[EMUD] kills all known's Demons

killall: mgcamd: no process killed

killall: newcamd: no process killed

killall: camx: no process killed

killall: camd3: no process killed

killall: rdgd: no process killed

killall: netpilot: no process killed

killall: cardserv: no process killed

killall: cardserver: no process killed

[EMUD] check full patsh to start Emudemon=[newcamd &]

[newcamd 04:47:04] compiled Sep 25 2004, 03:36:32

[newcamd 04:47:04] using demux api 3, gtx output 16 bytes

[newcamd 04:47:04] /dev/dvb/adapter0/demux0: No such file or directory

[newcamd 04:47:05] Error: demux device could not be opened. Shutting down.

Kick to background...

[EMUD] go on PID=136

[EMUD] setsid=113

SwitchEmuServer.sh: applet not found

[] Konfigurationsdatei wurde geladen.

killall: MGcamd: no process killed

killall: camd3: no process killed

killall: camx: no process killed

killall: newcamd: no process killed

killall: scam: no process killed

[] Alle Emulationen wurden beendet.

/var/bin/SwitchEmu_Scripte/MGcamd.switch: 14: ./MGcamd: not found

wget: Unable to connect to remote host (127.0.0.1): Connection refused

[] Programm wurde erneut ausgewhlt.

[] Emulation MGcamd gestartet.

[] Warte auf externe Befehle...

mv: unable to rename `/var/tuxbox/config/enigma/registry': No such file or direc

tory

/dev/fb/0: No such file or directory

framebuffer not available.

no framebuffer available

no active skin

Shutdown

+ cp /tmp/irdeto /var/keys/irdeto

+ cp /tmp/seca /var/keys/seca

+ cp /tmp/via /var/keys/via

+ cp /tmp/nagra /var/keys/nagra

+ cp /tmp/conax /var/keys/conax

+ cp /tmp/SoftCam.Key /var/keys/SoftCam.Key

+ cp /tmp/Conax.Key /var/keys/Conax.Key

system shutdown...

/etc/init.d/rcK: 6: /bin/switch: not found

umount: /var: Device or resource busy

umount: /tmp: Device or resource busy

umount: /dev: Device or resource busy

The system is going down NOW !!

Sending SIGTERM to all processe[EMUD] intercepted signal = 15

[EMUD] kills all known's Demons

killall: mgcamd: no process killed

killall: newcamd: no process killed

killall: camx: no process killed

killall: camd3: no process killed

killall: rdgd: no process killed

Sending SIGKILL to all processes.

The system is halted. Press Reset or turn off power

dann ist sie aus.

wer kann was entnehmen?danke

kai-t · 16. Juni 2005

Da passt was nicht am image denk ich.

Hier fängts an :

avia_av: microcode verify: 5789 errors.

avia_av: timeout waiting for decoder init to complete. (00000001)

insmod: init_module: avia_av: Input/output error

Using /lib/modules/2.4.25-dbox2/misc/avia_gt.o

Flash doch mal das Keywelt 1xI. Und poste nochmal das log. Gehts genau an der selben stelle schief ist vieleicht auch der avia chip hinüber, aber wie gesagt flash erstmal ein image von dem ich sicher weiß das der treiber ok ist. eben das Keywelt.

Gruß

Kai

linuxe · 16. Juni 2005

ist der log vom 1x image keywelt ,aber der stoppt zu früh

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.2 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID XXXXXX dsID immer überschreiben Gruß homer1974

debug: HWrev 61 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 152952

verify sig: 263

Branching to 0x40000

U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Sagem, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ....... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

...............................................................

Un-Protected 63 sectors

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load complete: 625303 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 625239 Bytes = 610.6 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

kai-t · 16. Juni 2005

Hmmm, das ist ja komisch.

Jetzt hätte ich noch ne bitte, kannst du das 1xI vom März einspielen und das log posten. Ich hoffe das er da weiter kommt.

Gruß

Kai

linuxe · 16. Juni 2005

mache ich sofort

linuxe · 16. Juni 2005

das gleiche wieder beim märz image und beim nexus 1x auch

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.2 mID 03

debug: feID 00 enxID 03

debug: fpID 52 EIDT WORSCHTER: dsID immer überschreiben

debug: HWrev 61 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Got BOOTP reply from Server IP 192.168.178.50, My IP 192.168.178.202

debug: Sending TFTP-request for file H/Programme/DBoxBoot/ppcboot_writeflash

will verify ELF image, start= 0x800000, size= 201596

verify sig: 262

boot net: boot file has no valid signature

Branching to 0x40000

ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: ### No HW ID - assuming TQM8xxL

DRAM: (faked) 32 MB

Ethernet: 00-50-9c-3b-b9-fb

FLASH: 8 MB

LCD driver (KS0713) initialized

BOOTP broadcast 1

TFTP from server 192.168.178.50; our IP address is 192.168.178.202

Filename 'H/Programme/tftpboot/logo-lcd'.

Load address: 0x130000

Loading: ##

done

LCD logo at: 0x130000 (0x1F9FFC0 bytes)

BOOTP broadcast 1

TFTP from server 192.168.178.50; our IP address is 192.168.178.202

Filename 'H/Programme/tftpboot/logo-fb'.

Load address: 0x120000

Loading: #########

done

FB logo at: 0x0 (0x1FC0000 bytes)

AVIA Frambuffer

Input: serial

Output: serial

1: Console on ttyS0

2: Console on null

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

BOOTP broadcast 1

TFTP from server 192.168.178.50; our IP address is 192.168.178.202

Filename 'H/Programme/tftpboot/kernel-cdk'.

Load address: 0x100000

Loading: T T T T T T T T T

Retry count exceeded; starting again

BOOTP broadcast 2

TFTP from server 192.168.178.50; our IP address is 192.168.178.202

Filename 'H/Programme/tftpboot/kernel-cdk'.

Load address: 0x100000

Loading: T T T T

Worschter · 16. Juni 2005

Da ist das Problem, daß im Image die Bootkonsole abgeschaltet ist, deswegen geht es nicht weiter.

Im Squashfs Image ist die Bootkonsole an, da sollte mehr zu sehen sein.

EDIT: hattest Du den BOOTP-Server an? deaktiviere den mal im Bootmanager

linuxe · 16. Juni 2005

so das ist das squashimage

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.2 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID dsID überschreiben

debug: HWrev 61 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 160940

verify sig: 263

Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (May 22 2005 - 13:40:01)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Sagem, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .. done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 627260 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 627196 Bytes = 612.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.27-dbox2 (image@Tower) (gcc version 3.3.5) #2 So Mai 22 14:09:

01 CEST 2005

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3b:b9:fb

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

CFI: Found no D-Box 2 flash memory device at location zero

D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode

Intel/Sharp Extended Query Table at 0x0031

cfi_cmdset_0001: Erase suspend on write enabled

Using buffer write method

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x004a0000 : "root (squashfs)"

0x004a0000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "flfs (u-boot)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.00 (2005.05.22-11:56+0000) multi-call bjffs2_scan_eras

eblock(): Magic bitmask 0x1985 not found at 0x002a0000: 0xeeaa instead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0004: 0xaaaa in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0008: 0xaeaf in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a000c: 0xafaa in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0010: 0xaaaa in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0014: 0xaaaa in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0018: 0xbbbf in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a001c: 0xaeaa in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0020: 0xbbee in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002a0024: 0xafae in

stead

Further such events for this erase block will not be printed

Empty flash at 0x002a0584 ends at 0x002a0588

Empty flash at 0x002a0638 ends at 0x002a063c

Empty flash at 0x002a0640 ends at 0x002a0644

Empty flash at 0x002a0820 ends at 0x002a0824

Empty flash at 0x002a0904 ends at 0x002a0908

Empty flash at 0x002a0930 ends at 0x002a0934

Empty flash at 0x002a0988 ends at 0x002a098c

Empty flash at 0x002a09a0 ends at 0x002a09a4

Empty flash at 0x002a09b8 ends at 0x002a09bc

Empty flash at 0x002a09e4 ends at 0x002a09e8

Empty flash at 0x002a0bf0 ends at 0x002a0bf4

Empty flash at 0x002a0c2c ends at 0x002a0c30

Empty flash at 0x002a0dc4 ends at 0x002a0dc8

Empty flash at 0x002a0e44 ends at 0x002a0e48

Empty flash at 0x002a0e7c ends at 0x002a0e80

Empty flash at 0x002a0f88 ends at 0x002a0f8c

Empty flash at 0x002a1004 ends at 0x002a100c

Empty flash at 0x002a1024 ends at 0x002a1028

Empty flash at 0x002a1030 ends at 0x002a1034

Empty flash at 0x002a1094 ends at 0x002a1098

Empty flash at 0x002a110c ends at 0x002a1110

Empty flash

das geht endlos so weiter ich habe abgebrochen

Worschter · 16. Juni 2005

Also ich bin kein Experte, aber ich würd sagen, da kann ein Speicherbereich nicht gelesen werden.

Erster Tip würde auf nen defekten Flash zielen.

Das würde auch mit dem Problem der anderen Images zusammenpassen

linuxe · 16. Juni 2005

nun geht die box nicht mehr aus ,bleibt aber im loading kernel stehen

Worschter · 16. Juni 2005

Zieh mal den Stecker raus und lass sie bisl abkühlen, versuch es dann nochmal.

linuxe · 16. Juni 2005

das ist jetzt der neuste bootslog

warum geht das plötzlich so?

sagt der inhalt was aus?

[sectionsd] getUTC: open: No such file or directory

[sectionsd] open dmx: No such file or directory

[neutrino] frameBuffer Instance created

/dev/fb/0: No such file or directory

framebuffer not available.

FBIOPUT_VSCREENINFO: Bad file descriptor

FBIOGET_FSCREENINFO: Bad file descriptor

[neutrino] Error while setting framebuffer mode

[sectionsd] getUTC: open: No such file or directory

[sectionsd] open dmx: No such file or directory

[sectionsd] getUTC: open: No such file or directory

starte pcamd -kill

[camd]: fahre runter...

[camd]: Slot1: schliesse...

[camd]: Slot1: warte auf Monitor...

[camd]: Slot1: geschlossen

[camd]: Slot2: schliesse...

[camd]: Slot2: geschlossen

[camd]: Slot3: schliesse...

[camd]: Slot3: warte auf Monitor...

[camd]: Slot3: geschlossen

[sectionsd] open dmx: No such file or directory

[camd]: Slot3: CA_SEND_MSG - Bad file descriptor

[sectionsd] getUTC: open: No such file or directory

[camd]: KeyDB: beendet

camd !!!STREAMBOARD!!! dbox2 v3.684b - erfolgreich beendet

Warte auf camd3xx (max. 5 seconds)

[sectionsd] open dmx: No such file or directory

[sectionsd] getUTC: open: No such file or directory

[sectionsd] open dmx: No such file or directory

[sectionsd] getUTC: open: No such file or directory

Entlade Multicam-Treiber

[sectionsd] open dmx: No such file or directory

zapit shot down

[sectionsd] getUTC: open: No such file or directory

[basicsocket] receive_data: Connection reset by peer

[CBasicClient] receive failed: /tmp/zapit.sock