E-Nigger Geschrieben 29. Mai 2017 Melden Share Geschrieben 29. Mai 2017 Hallo Leute ich habe gestern meine Neo2(Kabel) gestartet und es gingen keine Sender mehr Nach längeren suchen ist mir aufgefallen das die Box jetzt einen Sattuner erkennt obwohl ein Phillips Kabeltuner verbaut ist Auch ein anderes Image (Ni Image) bringt den selben Fehler Die Netzteil Elkos sehen auch gut aus wie auch der Spannungswandler am Tuner Hatt jemand von euch eine Idee??? Ich würde erstmal proforma die Elkos tauschen Gruß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin Gandalf Geschrieben 29. Mai 2017 Admin Melden Share Geschrieben 29. Mai 2017 Ein paar Daten zum Problem wären hilfreich für eine Analyse..... - Bootlog - Log vom Flashversuch Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
E-Nigger Geschrieben 29. Mai 2017 Autor Melden Share Geschrieben 29. Mai 2017 (bearbeitet) U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx Chipset information Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 Option: 00010000 max. clock: 600 MHz Core voltage: high Clock information MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz CPU : 594.000 MHz from PLL1 Memory configuration Start End Type Description 00000000 0FFFFFFF RAM System main memory bank #0 10000000 17FFFFFF RAM System main memory bank #1 F0000000 F1FFFFFF FLASH Spansion S29GL256P (256 Mbit / 16M x 16) Serial number: 008-00009997 (08-00270D) *** Warning - bad CRC, using default environment *** Network configuration MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-27-0D PHY: IC Plus IP101 address: 09 Error: Bad gzipped data Error: no valid bmp or bmp.gz image at f0060000 Hit any key to stop autoboot: 1 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream HDx Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2314476 Bytes = 2.2 MB Load Address: 00048000 Entry Point: 00048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.34.13-nevis (root@mh) (gcc version 4.6.3 (crosstool-NG 1.15.0) ) #1 Mon Apr 28 14:48:40 MSK 2014 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f CPU: VIPT aliasing data cache, VIPT aliasing instruction cache Machine: CST HDx IRD Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 384988k/384988k available, 8228k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0x98800000 - 0xe0000000 (1144 MB) lowmem : 0x80000000 - 0x98000000 ( 384 MB) modules : 0x7e800000 - 0x80000000 ( 24 MB) .init : 0x80048000 - 0x80062000 ( 104 kB) .text : 0x80062000 - 0x8047f000 (4212 kB) .data : 0x80480000 - 0x804a0220 ( 129 kB) NR_IRQS:352 Console: colour dummy device 80x30 console [ttyRI0] enabled Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 751 io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded CX2450x MTD driver v1.0 (Apr 28 2014, 14:48:16) (c) Coolstream International Ltd. cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x000000000000-0x000000060000 : "U-Boot" 0x000000060000-0x000000080000 : "Splash" 0x000000080000-0x000000480000 : "kernel" 0x000000480000-0x000002000000 : "systemFS" arcvmac arcvmac: ARC VMAC at 0x80484588 irq 24 00:c5:5c:00:27:0d ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Trident CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Trident CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected mice: PS/2 mouse device common for all mice i2c /dev entries driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 VFS: Mounted root (jffs2 filesystem) on device 31:3. Freeing init memory: 104K init started: BusyBox v1.19.3 (2012-05-23 11:34:45 MSK) starting pid 342, tty '': '/etc/init.d/rcS' mount: using /etc/fstab mount: using /etc/fstab mount: mounting /dev/sda1 on /media/sda1 failed: No such file or directory mount: mounting /dev/sdb1 on /media/sdb1 failed: No such file or directory HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: graphics, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: platform, action: add, product: (null), interface: (null) HOTPLUG: source: sound, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: i2c-dev, action: add, product: (null), interface: (null) HOTPLUG: source: i2c-dev, action: add, product: (null), interface: (null) HOTPLUG: source: i2c, action: add, product: (null), interface: (null) HOTPLUG: source: i2c, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: platform, action: add, product: (null), interface: (null) HOTPLUG: source: platform, action: add, product: (null), interface: (null) HOTPLUG: source: scsi_host, action: add, product: (null), interface: (null) HOTPLUG: source: scsi_host, action: add, product: (null), interface: (null) HOTPLUG: source: scsi_generic, action: add, product: (null), interface: (null) HOTPLUG: source: block, action: add, product: (null), interface: (null) HOTPLUG: source: block, action: add, product: (null), interface: (null) HOTPLUG: source: scsi_device, action: add, product: (null), interface: (null) HOTPLUG: source: scsi_disk, action: add, product: (null), interface: (null) HOTPLUG: mknod /dev/sda block 8 0 ... HOTPLUG: source: scsi, action: add, product: (null), interface: (null) HOTPLUG: mknod /dev/sda1 block 8 1 ... HOTPLUG: source: bdi, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: mdio_bus, action: add, product: (null), interface: (null) HOTPLUG: source: mdio_bus, action: add, product: (null), interface: (null) udhcpc (v1.19.3) started Sending discover... Sending discover... Sending select for 192.168.178.28... Lease of 192.168.178.28 obtained, lease time 864000 deleting routers route: SIOCDELRT: No such process adding dns 192.168.178.1 HOTPLUG: mkdir -p "/media/sda1" ... HOTPLUG: mkdir -p "/media/sda" ... HOTPLUG:test auto mounting mount -t auto /dev/sda1 "/media/sda1" ... HOTPLUG:test auto mounting mount -t auto /dev/sda "/media/sda" ... HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: misc, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: bus, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: mount -t auto /dev/sda "/media/sda" failed: 3072 HOTPLUG: rmdir "/media/sda" ... HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: class, action: add, product: (null), interface: (null) HOTPLUG: source: platform, action: add, product: (null), interface: (null) HOTPLUG: source: module, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: i2c, action: add, product: (null), interface: (null) HOTPLUG: source: drivers, action: add, product: (null), interface: (null) HOTPLUG: source: dvb, action: add, product: (null), interface: (null) Please press Enter to activate this console. HOTPLUG: source: firmware, action: add, product: (null), interface: (null) HOTPLUG: source: firmware, action: remove, product: (null), interface: (null) Hier mal der Bootlog mit Orginalimage (selbes Problem) Kabeltuner als Sattuner erkannt Gruß bearbeitet 30. Mai 2017 von Gandal Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 30. Mai 2017 Admin Melden Share Geschrieben 30. Mai 2017 @E-Nigger Das Log ist leider nicht vollständig und hört vor den entscheidenden Einträgen auf. Wichtig sind die Zeilen, welche nach der Zeile die mit "DVB: registering adapter 0 frontend 0 ..." beginnt, kommen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
E-Nigger Geschrieben 30. Mai 2017 Autor Melden Share Geschrieben 30. Mai 2017 OK ich versuch heute Abend noch mal Zeit zu finden. Ich wechsel erst einmal die Netzteil Elkos + den Elko neben der CPU. Die sehen zwar I.O. aus, aber ein Test ist es wert. Ich habe festgestellt das auf meiner zweiten Notfall NEO der Fronted 0 der Phillips Kabeltuner ist. Auf der defekten zeigt es mir in den Boxinfos nur Fronted 1 als Sattuner an. Gruß Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
E-Nigger Geschrieben 30. Mai 2017 Autor Melden Share Geschrieben 30. Mai 2017 (bearbeitet) Ich habe jetzt noch mal das Coolstream-Reloaded Image probiert, damit bleibt die Box jetzt im Boot hängen (Neutrino wird gestartet). anbei der Bootlog =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.05.30 23:40:34 =~=~=~=~=~=~=~=~=~=~=~= U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx Chipset information Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 Option: 00010000 max. clock: 600 MHz Core voltage: high Clock information MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz CPU : 594.000 MHz from PLL1 Memory configuration Start End Type Description 00000000 0FFFFFFF RAM System main memory bank #0 10000000 17FFFFFF RAM System main memory bank #1 F0000000 F1FFFFFF FLASH Spansion S29GL256P (256 Mbit / 16M x 16) Serial number: 008-00009997 (08-00270D) *** Warning - bad CRC, using default environment *** Network configuration MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-27-0D PHY: IC Plus IP101 address: 09 Error: Bad gzipped data Error: no valid bmp or bmp.gz image at f0060000 Hit any key to stop autoboot: 1 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream HDx Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4136592 Bytes = 3.9 MB Load Address: 17048000 Entry Point: 17048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Linux version 2.6.26.8-nevis Team@cool-stream.to (gcc version 4.3.2 (crosstool-NG-1.3.2) ) #1 Tue Dec 6 21:03:48 CET 2011 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f Machine: CoolStream HDx IRD Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x30 console [ttyRI0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 383232KB available (3800K code, 349K data, 116K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 192 bytes NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (SUMMARY) © 2001-2006 Red Hat, Inc. SGI XFS with security attributes, realtime, no debug enabled msgmni has been set to 748 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded Inside emacdev_load function Inside emacdev_init function EMAC 0 Initialized RealTek 8201 PHY eth0: Link down Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods CX2450x MTD driver v1.0 (Dec 6 2011, 21:01:30) (c) Coolstream International Ltd. cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x00000000-0x00060000 : "U-Boot" 0x00060000-0x00080000 : "Splash" 0x00080000-0x00480000 : "kernel" 0x00480000-0x02000000 : "systemFS" cx2450x-ehci cx2450x-ehci.0: Conexant CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Conexant CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 cx2450x-ehci cx2450x-ehci.1: Conexant CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Conexant CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Advanced Linux Sound Architecture Driver Version 1.0.16. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. VFS: Mounted root (jffs2 filesystem). Freeing init memory: 116K init started: BusyBox v1.18.4 (coolstream) running /sbin/mknodes rootdir=/dev table=<stdin> done /sbin/mknodes starting /etc/init.d/S01mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... ********************pre-wlan0******************************* mkdir: can't create directory '/var/run/wpa_supplicant': File exists Failed to connect to wpa_supplicant - wpa_ctrl_open: Success Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' Line: 3 - start of a new network block ssid - hexdump_ascii(len=17): 79 6f 75 72 5f 6e 65 74 77 6f 72 6b 5f 6e 61 6d your_network_nam 65 e PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED] proto: 0x3 key_mgmt: 0x2 pairwise: 0x18 group: 0x18 PSK (from passphrase) - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='your_network_name' Could not read interface wlan0 flags: No such device Failed to initialize driver interface Failed to add interface wlan0 Cancelling scan request Cancelling authentication timeout ********************pre-wlan0******************************* ip: can't find device 'wlan0' ip: SIOCGIFFLAGS: No such device ip: can't find device 'wlan0' udhcpc (v1.18.4) started Sending discover... Sending discover... Sending discover... No lease, failing Starting ifplugd... done. starting /etc/init.d/S52syslogd ... Jan 1 01:00:20 hd1 syslog.info syslogd started: BusyBox v1.18.4 starting /opt/pkg/etc/init.d/S53vsftpd ... starting /etc/init.d/S54inetd ... starting /etc/init.d/S55loadmodules ... ntpd: bad address 'time.fu-berlin.de' ****************** load im modules ************************************************************************ DVB: Unable to find symbol cx24116_attach() starting /etc/init.d/S60autofs ... hostname: hd1: Host name lookup failure automount: /etc/auto.net does not exist, cannot start starting /etc/init.d/S60rsyncd ... starting /opt/pkg/etc/init.d/S80djmount ... Jan 1 01:00:28 hd1 daemon.info rsyncd[494]: rsyncd version 3.0.7 starting, listening on port 873 [I] Mount options = iocharset=utf-8 [I] Charset : successfully initialised charset='utf-8' starting /etc/init.d/S95rescan-failed-drives ... starting /etc/init.d/S96TuxDNS ... start: tuxdns start: tuxdns already running starting /etc/init.d/S96pin ... starting /etc/init.d/S97SoftCam ... no change in ignore.list starting /etc/init.d/S97newcs ... starting /etc/init.d/S97oscam ... oscam: start oscam: ready starting /etc/init.d/S98FritzCallMonitor ... start: FritzCallMonitor start: FritzCallMonitor already running starting /etc/init.d/S98fritzcm ... start: Fritz Call-Monitor start: ready starting /etc/init.d/S98gbox ... starting /etc/init.d/S98infobarnews ... rm: can't remove 'infobar.txt': No such file or directory starting /etc/init.d/S98mgcamd ... wget: bad address 'www.cool-stream.to' grep: news.txt: No such file or directory rm: can't remove '/tmp/news.txt': No such file or directory mgcamd: start mgcamd: ready with 10 seconds delay for oscam to finish startup starting /etc/init.d/S99extern ... starting /etc/init.d/S99kabelsat ... ***************************** Sattuner ZEE erkannt ******************************** starting /etc/init.d/S99nfs ... starting /etc/init.d/S99packages ... find: /share/tuxbox/neutrino/icons/logo: No such file or directory find: /tmp/media/SWAP/logo: No such file or directory starting /etc/init.d/S99xcheckmedia ... Jan 1 00:00:47 hd1 daemon.info init: starting pid 626, tty '': '/etc/init.d/start' Please press Enter to activate this console. [CBasicClient] connect failed. /tmp/zapit.sock: No such file or directory rescanning /sys/class/scsi_host/host0 rescanning /sys/class/scsi_host/host1 [english.locale] missing entry: standard_button_vtxt [neutrino] frameBuffer Instance created 14400k video mem smem_start 3c4e000 FB: 1280x720x32 line length 5120. Using nevis GXA accelerator. [TRACE NOT READY]:================================================================ [TRACE NOT READY]:================== CNXT KAL Initializing ... ================= [TRACE NOT READY]:================================================================ [TRACE NOT READY]:Pthread Priorities, Min=1, Max=99, scaler=2575 [TRACE NOT READY]:KAL Semaphores Initializing [TRACE NOT READY]:KAL Semaphore Init Complete [TRACE NOT READY]:KAL Queues Initializing [TRACE NOT READY]:CREATED SEMAPHORE: ID 0x11070000, named QTBLPRT [TRACE NOT READY]:KAL Queues Init Complete [TRACE NOT READY]:CREATED SEMAPHORE: ID 0x11070001, named KPRSEM KAL Trace Initializaing ... KAL Trace init Complete KAL mmap'ings: cached[0] = 0x31354000 (0x0a000000) uncached[0] = 0x31854000 (0x03700000) content[0] = 0x38154000 cached[1] = 0x3ac54000 uncached[1] = 0x3ac54000 content[1] = 0x3c554000 CSAPI (VIDEO): video init: 1 CSAPI (API): CST API coolstream-mt-2.5svn2392 initialized on Rev. 8 Serial Nr 216998927673101 ***************************** rec dir /tmp/media/RECORD/movies timeshift dir /tmp/media/RECORD/timeshift [deutsch.locale] missing entry: standard_button_vtxt [neutrino] settings font file /share/fonts/neutrino.ttf [neutrino] font family Arial Narrow CVFD::setlcdparameter dimm 15 power 1 CVFD::showServicename: CVFD::ShowText: [] CVFD::ShowText: [Neutrino wird gestartet...] CSAPI (VIDEO): VIDEO: changing to 8: 1080i 50Hz CSAPI (VIDEO): SetVideoSystem: old Mode 2, new 2 CSAPI (VIDEO): SetVideoSystem: HD old uVideoStandard 22, new 23 CSAPI (VIDEO): DRM Event 5 CSAPI (VIDEO): HD Mode: 1920x1080 FrameRate 2 CSAPI (VIDEO): SetVideoSystem: SD old uVideoStandard 4, new 4 CSAPI (VIDEO): SD Mode: 720x576 FrameRate 2 CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0 CSAPI (VIDEO): VIDEO: Set format to 16:9 CSAPI (VIDEO): DRM Event 3 CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan CSAPI (VIDEO): Standby 1 -> 0 CSAPI (HDMI-CEC): Power Status: STANDBY -> ON CSAPI (HDMI-CEC): Power Status: ON CSAPI (VIDEO): Standby 0 -> 0 [fe0] New frontend on adapter 0 [fe0] open frontend [fe0] open /dev/dvb/adapter0/frontend0 [fe0] frontend fd 20 type 0 [fe0] voltage 13 [fe0] tone off [fe0] FE_SET_TONE took: 799 msec (min 799 max 799) [fe0] diseqc power on [fe0] Diseqc cmd: 0xE0 0x10 0x3 [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/frontend.cpp:setDiseqcType:846] DISEQC_1_0 [fe0] diseqc power on [fe0] Diseqc cmd: 0xE0 0x10 0x3 [fe0] diseqc reset [fe0] Diseqc cmd: 0xE0 0x10 0x0 [fe0] Diseqc cmd: 0xE0 0x10 0x1 [zapit.cpp] diseqc type = 3 CSAPI (API): MessageQueue: queue opened with name CA-QUEUE (00000015) CSAPI (DVB-CI): slot 0 initialized CSAPI (API): MessageQueue: queue opened with name DVBCI Queue0 (00000016) CSAPI (DVB-CI): Slot task starting! [zapit] Loading services, channel size 192 .. CSAPI (DVB-CI): Starting DVBCI Slot Task 0 *** CSAPI (DVB-CI): CNXT_DVBCI_ST_NOCARD [getservices] loading motor positions... [zapit] 5000 services loaded (5000)... [zapit] service loading took: 1658 msec parseXmlFile: Error parsing "/var/tuxbox/config/zapit/myservices.xml": no element found at line 1 [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/zapit.cpp:PrepareChannels:684] LoadServices: success Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 97044000 [00000000] *pgd=00000000 Internal error: Oops: 17 [#1] Modules linked in: autofs4 cnxt_sata_drv cs_frontend dvb_core max2112(P) avl2108(P) tda10023 stv090x stv6110 cs_control(P) cnxt_alsa cnxt_lnx cnxt_fb(P) cnxt_base(P) cnxt_kal cnxt_i2c ftdi_sio usbserial fuse cifs cs_frontpanel(P) rt3070sta 8192cu 8712u CPU: 0 Tainted: P (2.6.26.8-nevis #1) PC is at i2c_transfer+0x14/0xa0 LR is at max2112_read_reg+0x60/0xb0 [max2112] pc : [<97299828>] lr : [<984cd4c4>] psr: 60000013 sp : 979fdec0 ip : 979fdee0 fp : 979fdedc r10: 978ea188 r9 : 00000000 r8 : 984e6a6c r7 : 979fdee4 r6 : 979fdf3c r5 : 978f6f08 r4 : 978f6e00 r3 : 00000000 r2 : 00000002 r1 : 979fdee4 r0 : 975b62b8 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 00c5387d Table: 175d4008 DAC: 00000017 Process kdvb-ad-0-fe-0 (pid: 653, stack limit = 0x979fc260) Stack: (0x979fdec0 to 0x979fe000) dec0: 978f6e00 978f6f08 979fdf3c 979fc000 979fdf14 979fdee0 984cd4c4 97299820 dee0: 979fdf04 00000060 97090001 979fdeff 00010060 97600001 979fdefe 0c9fdf08 df00: 978f6e00 984cea00 979fdf34 979fdf18 984cd54c 984cd470 97421570 975b6000 df20: 979fdfa4 978ea000 979fdf54 979fdf38 984c7690 984cd520 00000000 00000000 df40: 975b6038 975b6038 979fdf6c 979fdf58 984c826c 984c7658 978ea000 00000000 df60: 979fdfd4 979fdf70 984d8924 984c823c 979fdfa4 00000017 97f1a800 978ea19c df80: 978ea1bc 978ea200 00000000 978ea004 00000000 9760d340 9708fc50 979fdf9c dfa0: 979fdf9c 00000000 979fdfd4 979fc000 975b6038 984d85d4 97462ee8 00000000 dfc0: 00000000 00000000 979fdff4 979fdfd8 9708f750 984d85e0 00000000 00000000 dfe0: 00000000 00000000 00000000 979fdff8 9707eedc 9708f704 00000000 00000000 Backtrace: [<97299814>] (i2c_transfer+0x0/0xa0) from [<984cd4c4>] (max2112_read_reg+0x60/0xb0 [max2112]) r7:979fc000 r6:979fdf3c r5:978f6f08 r4:978f6e00 [<984cd464>] (max2112_read_reg+0x0/0xb0 [max2112]) from [<984cd54c>] (max2112_get_status+0x38/0xd8 [max2112]) r5:984cea00 r4:978f6e00 [<984cd514>] (max2112_get_status+0x0/0xd8 [max2112]) from [<984c7690>] (avl2108_read_status+0x44/0xa8 [avl2108]) r6:978ea000 r5:979fdfa4 r4:975b6000 [<984c764c>] (avl2108_read_status+0x0/0xa8 [avl2108]) from [<984c826c>] (avl2108_tune+0x3c/0x40 [avl2108]) r5:975b6038 r4:975b6038 [<984c8230>] (avl2108_tune+0x0/0x40 [avl2108]) from [<984d8924>] (dvb_frontend_thread+0x350/0x5f4 [dvb_core]) r4:00000000 [<984d85d4>] (dvb_frontend_thread+0x0/0x5f4 [dvb_core]) from [<9708f750>] (kthread+0x58/0x8c) [<9708f6f8>] (kthread+0x0/0x8c) from [<9707eedc>] (do_exit+0x0/0x650) r7:00000000 r6:00000000 r5:00000000 r4:00000000 Code: e92dd8f0 e24cb004 e590300c e1a07001 (e5931000) ---[ end trace dc8b4a850b22d06f ]--- [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/bouquets.cpp:parseBouquetsXml:334] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/bouquets.cpp:parseBouquetsXml:378] total: 148 bouquets [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/bouquets.cpp:parseBouquetsXml:334] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/bouquets.cpp:parseBouquetsXml:378] total: 176 bouquets [zapit] bouquet loading took: 1646 msec [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/zapit.cpp:Start:2024] channels have been loaded succesfully [zapit] diseqc type = 3 [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/frontend.cpp:setDiseqcType:846] DISEQC_1_0 [/home/reloaded/compile/reloaded-git/source/neutrino-hd/src/zapit/src/frontend.cpp:setDiseqcType:846] DISEQC_1_0 [pmt] stop update filter CCamManager: channel b24803f300012b5c dont have caPmt StopPlayBack: standby 0 forced 0 [zapit] zap to Das Erste HD (b24803f300012b5c) [fe0] setLnbOffsets 9750000/10600000/11700000 [fe0] Diseqc cmd: 0xE0 0x10 0x38 0xF2 [fe0] SatellitePosition 0 -> 192 [fe0] motorPosition 0 -> 0 usals off [fe0] tune to frequency 11362000 pol Horizontal/Left srate 22000000 [fe0] voltage 18 [fe0] tuner to frequency 1612000 (offset 9750000) Gruß bearbeitet 31. Mai 2017 von SnowHead Log in Spoiler gepackt Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
E-Nigger Geschrieben 31. Mai 2017 Autor Melden Share Geschrieben 31. Mai 2017 So ich habe jetzt die Netzteil Elkos gewechselt + den neben der CPU. Danach im Uboot per Com das Keyweltimage per tftp geflasht, leider kein Erfolg. Anbei mein Bootlog, vieleicht hat einer eine Idee ??????? =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.06.01 01:22:54 =~=~=~=~=~=~=~=~=~=~=~= U-Boot 2009.03-svn1773 (Nov 02 2010 - 15:25:47) Coolstream HDx Chipset information Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 Option: 00010000 max. clock: 600 MHz Core voltage: high Clock information MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz CPU : 594.000 MHz from PLL1 Memory configuration Start End Type Description 00000000 0FFFFFFF RAM System main memory bank #0 10000000 17FFFFFF RAM System main memory bank #1 F0000000 F1FFFFFF FLASH Spansion S29GL256P (256 Mbit / 16M x 16) Serial number: 008-00009997 (08-00270D) *** Warning - bad CRC, using default environment *** Network configuration MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-27-0D PHY: IC Plus IP101 address: 09 Error: Bad gzipped data Error: no valid bmp or bmp.gz image at f0060000 Hit any key to stop autoboot: 1 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2323336 Bytes = 2.2 MB Load Address: 00048000 Entry Point: 00048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.19.0) ) #1 Mon Jun 16 21:04:21 CEST 2014 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f CPU: VIPT aliasing data cache, VIPT aliasing instruction cache Machine: CoolStream HDx IRD Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 384968k/384968k available, 8248k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0x98800000 - 0xe0000000 (1144 MB) lowmem : 0x80000000 - 0x98000000 ( 384 MB) modules : 0x7e800000 - 0x80000000 ( 24 MB) .init : 0x80048000 - 0x80063000 ( 108 kB) .text : 0x80063000 - 0x80482000 (4220 kB) .data : 0x80482000 - 0x804a4de0 ( 140 kB) NR_IRQS:352 Console: colour dummy device 80x30 console [ttyRI0] enabled Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 751 io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded CX2450x MTD driver v1.0 (Jun 16 2014, 21:01:02) (c) Coolstream International Ltd. cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x000000000000-0x000000060000 : "U-Boot" 0x000000060000-0x000000080000 : "Splash" 0x000000080000-0x000000480000 : "kernel" 0x000000480000-0x000002000000 : "systemFS" arcvmac arcvmac: ARC VMAC at 0x80486580 irq 24 00:c5:5c:00:27:0d ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Trident CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Trident CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver usbcore: registered new interface driver usbkbd usbkbd: :USB HID Boot Protocol keyboard driver usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 VFS: Mounted root (jffs2 filesystem) on device 31:3. Freeing init memory: 108K init started: BusyBox v1.24.1 (2016-04-23 21:24:16 CEST) JFFS2 notice: (352) jffs2_get_inode_nodes: Node header CRC failed at 0x2e0624. {1985,c001,00000031,4282d91d} running /sbin/mknodes rootdir=/dev table=<stdin> makedevs: line 16: can't create node console: File exists done /sbin/mknodes starting /etc/init.d/S02mdev ... starting /etc/init.d/S04loadmodules ... Sat Jan 1 00:00:00 CET 2000 starting /etc/init.d/S05mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... udhcpc (v1.24.1) started Sending discover... Sending discover... Sending discover... No lease, forking to background Starting wlan0 Failed to connect to wpa_supplicant - wpa_ctrl_open: Success Could not read interface wlan0 flags: No such device Failed to initialize driver interface ip: SIOCGIFFLAGS: No such device done. starting /etc/init.d/S52syslogd ... Jan 1 00:00:32 CST-00270D syslog.info syslogd started: BusyBox v1.24.1 starting /etc/init.d/S60autofs ... starting the automounter... starting /etc/init.d/S90inetd ... 1 Jan 00:00:32 ntpdate[1102]: ntpdate 4.2.8p6@1.3265-o (1) starting /etc/init.d/S96nfsd ... starting /var/etc/init.d/S9L_logomask ... starting /var/etc/init.d/S9T_tuxcald ... Exiting, name server cannot be used: Temporary failure in name resolution (-3) 1 Jan 00:00:32 ntpdate[1102]: name server cannot be used: Temporary failure in name resolution (-3) starting /var/etc/init.d/S9T_tuxmaild ... Jan 1 00:00:32 CST-00270D daemon.err automount[1112]: failed to load map, exiting Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start /var/plugins/operations camd_start /var/plugins/operations rezap [CBasicClient] connect failed. /tmp/zapit.sock: No such file or directory [frontend.cpp:getFEInfo:266] ioctl(fd, FE_GET_PROPERTY, &cmdseq): Operation not permitted [frontend.cpp:Open:227] /dev/dvb/adapter0/frontend1: No such file or directory [frontend.cpp:Open:227] /dev/dvb/adapter0/frontend2: No such file or directory [frontend.cpp:Open:227] /dev/dvb/adapter0/frontend3: No such file or directory /var/tuxbox/config/zapit/myservices.xml: No such file or directory /var/tuxbox/config/deepstandby.off failed: No such file or directory 00:00:42.744 [sectionsd] start /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory 00:00:42.781 [sectionsd] starting /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory 00:00:42.838 timeThread::run:: starting, pid 1163 (1190339664) 00:00:42.845 eitThread::run:: starting, pid 1163 (1198728272) 00:00:42.850 00:00:42.853 cnThread::run:: starting, pid 1163 (1207116880) freeSatThread::run:: starting, pid 1163 (1215505488) 00:00:42.936 timeThread: get DVB time ch 0x000000000000 (isOpen 1) 00:00:43.461 [sectionsd] commandserviceStopped 00:00:43.465 cnThread: stop eit update filter (not active) 00:00:43.467 [sectionsd] commandserviceStopped done 00:00:43.491 [sectionsd] commandserviceChanged: Service change to c788045f00353253 demux #0 00:00:43.500 timeThread: get DVB time ch 0x045f00353253 rc: -1 neutrino_sets_time 1 00:00:43.516 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) sh: you need to specify whom to kill showChannelLogo: logo_available: 1 file: /share/tuxbox/neutrino/icons/logo/Hustler TV.png after showchannellogo, mode = 3 ret = 3 logo_ok = 1 00:00:44.554 timeThread: get DVB time ch 0x045f00353253 (isOpen 1) logomask Version 1.2 00:01:20.561 timeThread: get DVB time ch 0x045f00353253 rc: -1 neutrino_sets_time 1 00:01:20.563 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:01:21.594 timeThread: get DVB time ch 0x045f00353253 (isOpen 1) 00:01:57.601 timeThread: get DVB time ch 0x045f00353253 rc: -1 neutrino_sets_time 1 00:01:57.603 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:01:58.634 timeThread: get DVB time ch 0x045f00353253 (isOpen 1) 00:02:34.641 timeThread: get DVB time ch 0x045f00353253 rc: -1 neutrino_sets_time 1 00:02:34.643 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:02:35.674 timeThread: get DVB time ch 0x045f00353253 (isOpen 1) 00:03:11.681 timeThread: get DVB time ch 0x045f00353253 rc: -1 neutrino_sets_time 1 00:03:11.682 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:03:12.714 timeThread: get DVB time ch 0x045f00353253 (isOpen 1) 00:03:48.721 timeThread: get DVB time ch 0x045f00353253 rc: -1 neutrino_sets_time 1 00:03:48.723 timeThread: Time set FAILED (enabled: ntp 0 dvb 1) 00:03:49.754 timeThread: get DVB time ch 0x045f00353253 (isOpen 1) Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 1. Juni 2017 Admin Melden Share Geschrieben 1. Juni 2017 @E-Nigger Im vorletzten Log kackt Dir ein Kerneltreiber für den Tuner ab. Such mal nach "Oops". Im letzten Log stimmt mit dem Filesystem was nicht (Node header CRC failed at 0x2e0624). Mach am besten mal ein Emergency-Recovery mit dem Originalimage (inklusive Kernel!), stelle erst mal nichts weiter ein und poste bitte noch mal ein vollständiges Bootlog. Lange Logs bitte zwischen die Tags [spoiler] und [/spoiler] packen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge