Kanal zur Zeit nicht verfügbar

[johnsmith29]

Hallo,

ich hatte bislang ein GLJ Image von 2009 drauf. Nun wollte ich mal was frisches drauf machen und habe Keywelt, Petze und Novatux probiert. Bei allen kommt "Fehler - Kanal zurzeit nicht verfügbar". Altes GLJ von 2009 eingespielt => Funktioniert direkt wieder.

 

DBox2 Nokia Avia600 Sat

eingespielt mit Hallenberg RJ45+Nullmodem

Sat Anlage: ganz normal Astra über LNB+Multischalter

 

Irgendwas mache ich wohl falsch. Wer kann mir helfen / Welche Informationen sind noch wichtig für eine bessere Fehlerbeschreibung?

 

Danke

[Gandalf]

- Sendersuchlauf gemacht?

 

Ein serielles Bootlog wäre mal ein Anfang für die Fehlereingrenzung.

[johnsmith29]

Bootlog:

 

 

U-Boot 2010.03 (Tuxbox) (Feb 20 2011 - 14:23:14)

 

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .. done.

env: found console with value ttyS0

env: found baudrate with value 9600

env: found dbox_duplex with value 0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

env: found lcd_bias with value 0

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

LCD: ready

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 671084 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.11-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 671020 Bytes = 655.3 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.37.11-dbox2 (petze@linux) (gcc version 3.4.6) #1 So 20. Feb 14:23:38 CET 2011

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=0

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:cb:62

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.18.3 (2011-02-20 14:49:16 CET)

starting pid 8, tty '': '/etc/init.d/sysinit'

[bOOT] running /etc/init.d/sysinit

Thu Jan 1 01:00:00 UTC 1970

starting pid 22, tty '': '/etc/init.d/rcS'

 

Please press Enter to activate this console. starting /etc/init.d/S05drivers ...

[bOOT] running /etc/init.d/S05drivers

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Nokia

Model: D-BOX2 (2 flash chips)

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

ves1x93: Detected ves1893a rev2

DVB: registering frontend 0:0 (VES1893)...

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av: AVIA 600L found.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

starting /var/etc/init.d/S06hdd ...

/var/etc/init.d/06hdd generated from neutrino ide/mmc/hdd drive-setup

01.01.1970 - 02:02:21

1.80 do not edit!

ide-interface/mmc disabled

starting /var/etc/init.d/S07mounts ...

/var/etc/init.d/07mounts generated from neutrino ide/mmc/hdd drive-setup

01.01.1970 - 02:02:21

1.80 do not edit!

starting /etc/init.d/S10network ...

starting /etc/init.d/S10rtc ...

starting /etc/init.d/S15syslogd ...

starting /etc/init.d/S16lircd ...

Jan 1 02:00:11 dbox syslog.info syslogd started: BusyBox v1.18.3

starting /etc/init.d/S17loadkeys ...

Loading /share/keymaps/i386/qwertz/de-latin1-nodeadkeys.kmap.gz

starting /etc/init.d/S18rdate ...

starting /etc/init.d/S20inetd ...

starting /etc/init.d/S25cdkVcInfo ...

starting /etc/init.d/S30autofs ...

[bOOT] Starting the automounter

starting /etc/init.d/S31nfsserver ...

starting /etc/init.d/S40tuxcald ...

starting /etc/init.d/S40tuxmaild ...

Jan 1 02:00:17 dbox daemon.err automount[200]: failed to load mapstarting /etc/init.d/S99gui ...

$Id: sectionsd.cpp,v 1.320 2011/01/22 12:17:57 seife Exp $

[sectionsd] Caching max 6000 events

[sectionsd] Caching 14 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[timerd] woke up from timer? false!

/var/plugins/operations camdstart

$Id: zapit.cpp,v 1.453 2010/10/26 20:10:42 dbt Exp $

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0 auto_fec 0

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory

/tmp/currentservices.xml: No such file or directory

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=0

[CVideo::setVideoFormat] output format: 4:3(LB)

neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)

neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron

[rcinput] no file /var/tuxbox/config/rc.conf was found

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] init menus...

[neutrino] GUI-Personalize instance created...

[network config] Instance created

[neutrino] setRepeat: delay=25 period=0 use kernel-repeat: no

[drive_setup] Instance created

[neutrino] registering as event client

[scan-setup] received 27 sats

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[basicsocket] receive timed out. waiting process 368

[CBasicClient] receive failed: /tmp/zapit.sock

[neutrino] no file /var/tuxbox/config/init.end was found

[neutrino] initialized everything

nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

zap failed!

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...[sectionsd] getUTC: read: Connection timed out

[basicsocket] send_data: Broken pipe (n = 8/8, pid = 366)

OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[yhttpd] Webserver starting...

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[sectionsd] getUTC: read: Connection timed out

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Select 1'

 

 

 

Beim Sendersuchlauf wird nichts gefunden. Es bleiben nurnoch ein paar Sky Sender in der Liste übrig, für die ich aber kein Abo habe. Ich hab das ganze noch mal mit einer anderen DBOX an einer anderen Sat-Dose im Haus probiert. Dort war kurzzeitig mal ARD und RTL verfügbar. Beim neuzapen, dann aber auch nichts mehr zu kriegen. Altes GLJ wieder drauf => läuft

[Gandalf]

Was für Einstellungen werden im "alten" GLI-Image verwendet und welcher U-Code wird benutzt?

Was sagen denn die Empfangswerte?

 

Sorry aber bei so wenig Hintergrundinformation ist es nicht einfach was zu sagen.

Wenn schon ein Log gepostet wird dann sollten auch einige Zappings drin sein denn sonst macht das wenig Sinn.

[merkwuerden]

@johnsmith29

 

Flashe das Keywelt-Image Januar 2011 V2. Da drin ist eine Senderliste für Astra 19.2E enthalten, die auch funktioniert, wenn die Empfangsanlage in Ordnung ist. Tut sie das nicht, hast Du ein Problem mit der Empfangsanlage, oder die Box ist defekt.

 

Vom Start der Box an erstellst Du ein Bootlog und postest das hier. Auch mal zwischen verschiedenen Kanälen wechseln, dabei ebenfalls Log mitlaufen lassen.