dBox2 startet nach ca. 2 Minuten neu

[zappzero]

Hallo allerseits,

habe folgendes Problem:

Habe mir eine Nokia Kabelbox mit Linux über eb**** gekauft.

Mit Hallenberg neues Image geflasht. (Natürlich ein 2er)

Klappt alles wunderbar.

Box startet ohne Probleme.

Jetzt das Problem:

Nach ca. 2 Minuten reagiert die Fernbedienung nicht mehr und die Box ist auch über Netzwerk nicht mehr erreichbar.

Dann startet die Box neu und alles geht von vorne los.

Habe schon mehrere Image ausprobiert.

Überall das gleiche.

 

Habt Ihr ne Ahnung was das sein kann?

 

Gruß Zappzero

[Keyjockey]

Avia500?

Stell mal den Avia Watchdog auf AUS, das sollte helfen.

[merkwuerden]

Und ansonsten gilt: vollständiges Bootlog ab Einschalten der Box anfertigen und dann hier posten. Ohne ist eine Fehlersuche nicht möglich, da bist Du dann mit einem Hellseher besser beraten. Unsere Kristallkugeln sind leider alle kaputt...

[zappzero]

Sorry Leute,

habe es nicht eher geschafft.

Hier das Bootlog:

 

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-21.6d.23.07.00.00-c3

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 170380

verify sig: 262

Branching to 0x40000

 

 

U-Boot 2009.08 (Tuxbox) (Jun 03 2010 - 02:21:58)

 

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . | / - . \ | / - . \ | . / - \ done.

env: found console with value null

env: found baudrate with value 9600

env: found dbox_duplex with value 0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 16

env: found lcd_bias with value 0

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

LCD: ready

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 671024 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.9-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 670960 Bytes = 655.2 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

 

 

 

Gruss Zappzero

[merkwuerden]

Das Bootlog ist nutzlos, weil ab dem Laden des Linux-Kernels keine Logmeldungen mehr ausgegeben werden, das Loggen auf der seriellen Schnittstelle ist im Image deaktiviert. Und ohne diese Ausgaben kann keiner sagen, was die Box da nach dem Booten veranstaltet.

 

Flashe das aktuelle Keywelt-Image, dort ist die Log-Ausgabe aktiv. Dann poste damit das Bootlog.

[zappzero]

Habe ich mir fast gedacht und habe das KeyImage geflasht.

Hoffe du kannst hiermit was anfangen:

 

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-21.6d.23.07.00.00-c3

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032debug: Got Block #0004debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 171660

verify sig: 262

Branching to 0x40000

 

 

U-Boot 2009.08 (Tuxbox) (Sep 26 2009 - 14:36:43)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . . | . / - . \ | / - \ done.

env: found console with value ttyS0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

LCD: ready

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 671052 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.6-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 670988 Bytes = 655.3 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.37.6-dbox2 (image@Server) (gcc version 3.4.6) #26 Sa Sep 26 14:37:12 CEST 2009

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:71:6e

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.14.4 (2009-09-26 14:42:24 CEST)

starting pid 8, tty '': '/etc/init.d/rcS'

mount: using /etc/fstab

 

 

##### Image-Version: Keywelt_Sep2009_V1 #####

 

Sat Sep 26 14:57:00 UTC 2009

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

dbox2_fp_input was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.6-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.100 2009/09/11 05:58:41 rhabarber1848 Exp $

avia_av: AVIA 500 LB4 found, sptsfix is off

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

DVB: VES1820(0): pwm=0x48

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

insmod: warning: kernel-module version mismatch

multicam was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.6-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starting pid 170, tty '': '/etc/init.d/start'

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.306 2009/09/14 13:33:28 seife Exp $

[sectionsd] Caching max 1500 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 120min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.

[timerd] woke up from timer? false!

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0 auto_fec 0

avia_gt_core: masking unhandled irq reg 0 bit 7

/var/tuxbox/config/zapit/services.xml: No such file or directory

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[CVideo::setVideoFormat] output format: 4:3(LB)

/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf.../var/plugins/operations camd_start

OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[yhttpd] Webserver starting...

/var/plugins/operations sect_renice

starte camd2

[camd2] EMM : active

[camd2] Socket=/tmp/camd.sock02

[camd] ca system id: 1722

neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)

neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[rcinput] no file /var/tuxbox/config/rc.conf was found

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] found esound, adding to mainmenue/personalize

[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)

[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no

[neutrino] registering as event client

[sectionsd] getUTC: read: Connection timed out

[neutrino] no file /var/tuxbox/config/init.end was found

[neutrino] initialized everything

 

 

[merkwuerden]

So weit ist das Log bis hier hin in Ordnung, Fehler sind keine zu erkennen.

 

Allerdings: Das Log nützt auch nicht viel, weil es den Bereich nicht abdeckt, an dem die Box dann hängen bleibt und später neu startet. Also bitte nochmal.

[zappzero]

Hi,

habe ja auch den Watchdog ausgeschaltet und jetzt scheint es zu gehen.

Werde es mal durchtesten.

Vielen Dank für Euere Bemühungen.

Gruß Zappzero

[Testit]

Wenn Nokia Boxen instabil werden, könnten neue Elkos im Netzteil helfen (die drei Großen vor dem Transformator)