separis Geschrieben 1. März 2010 Melden Share Geschrieben 1. März 2010 moin. bin langsam am verzweifeln. habe das ganze we hier gelesen und gebastelt. eins vorweg, ich habe schon 5 nokia-boxen debuggt und mit linux geflasht, ohne probleme. aber diese sagem schafft mich... sie ist im debug-mode und der schreibschutz ist deaktiviert. alles lt. den anleitungen hier. leider klappt das flashen weder mit dem bootmanager nocht mit dem hallenberg flash-assi. hier mal die log´s: bootmanager: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.2 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-aa.0a.b9.07.00.00-6b debug: HWrev 21 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.168.2, My IP 192.168.168.24 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash will verify ELF image, start= 0x800000, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-31-52-5b FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.168.2; our IP address is 192.168.168.24 Filename 'C/Programme/tftpboot/logo-lcd'. Load address: 0x130000 Loading: ## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.168.2; our IP address is 192.168.168.24 Filename 'C/Programme/tftpboot/logo-fb'. Load address: 0x120000 Loading: ######### done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 dbox2-ppcboot> bootp 120000 /C/Programme/DBOX_IFA/tftp/flash.img BOOTP broadcast 1 TFTP from server 192.168.168.2; our IP address is 192.168.168.24 Filename '/C/Programme/DBOX_IFA/tftp/flash.img'. Load address: 0x120000 Loading: ####################################################################### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ###################### done dbox2-ppcboot> protect off 10020000 107fffff ............................................................... Un-Protected 63 sectors dbox2-ppcboot> erase 10020000 107fffff Erase Flash from 0x10020000 to 0x107fffff sector 63 ..... done Erased 63 sectors dbox2-ppcboot> cp.l 120000 10020000 1F8000 Copy to Flash... Flashed 7MB done dbox2-ppcboot> flash-assi: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.2 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID http://Hallenberg.com debug: HWrev 21 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.168.2, My IP 192.168.168.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.168.2; our IP address is 192.168.168.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.168.2; our IP address is 192.168.168.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.168.2; our IP address is 192.168.168.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.168.2; our IP address is 192.168.168.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.168.2; our IP address is 192.168.168.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 627048 (99168 hex) Using SCC ETHERNET device TFTP from server 192.168.168.2; our IP address is 192.168.168.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################## done Bytes transferred = 586812 (8f43c hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626984 Bytes = 612.3 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 586748 Bytes = 573 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f1f000, end 01fae3fc ... OK Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.168.202:192.168.168.2:::::off Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2580) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:52:5b RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x006a0000 : "root (rootfs)" 0x006a0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.168.202, mask=255.255.255.0, gw=255.255.255.255, host=192.168.168.202, domain=, nis-domain=(none), bootserver=192.168.168.2, rootserver=192.168.168.2, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 572k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 72k init init started: BusyBox v1.13.0 (2008-11-29 23:52:02 CET lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface dbox2 - ImageFlashingAssistent 3.x - Hallenberg.com - Schreibe Backup: 8064k von 8064k (100%) Lade Flashimage... done. Sende Backup... Lösche Sektoren: 63 von 63 (100%)SR.4 or SR.5 bits set in buffer write (status 98). Clearing. Schreibe DaSR.4 or SR.5 bits set in buffer write (status 98). Clearing. teSR.4 or SR.5 bits set in buffer write (status 98). Clearing. n: SR.4 or SR.5 bits set in buffer write (status 98). Clearing. 0kSR.4 or SR.5 bits set in buffer write (status 98). Clearing. vSR.4 or SR.5 bits set in buffer write (status 98). Clearing. onSR.4 or SR.5 bits set in buffer write (status 98). Clearing. 8SR.4 or SR.5 bits set in buffer write (status 98). Clearing. 06SR.4 or SR.5 bits set in buffer write (status 98). Clearing. 4kSR.4 or SR.5 bits set in buffer write (status 98). Clearing. (SR.4 or SR.5 bits set in buffer write (status 98). Clearing. 0%SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. ScSR.4 or SR.5 bits set in buffer write (status 98). Clearing. hrSR.4 or SR.5 bits set in buffer write (status 98). Clearing. eiSR.4 or SR.5 bits set in buffer write (status 98). Clearing. beSR.4 or SR.5 bits set in buffer write (status 98). Clearing. DSR.4 or SR.5 bits set in buffer write (status 98). Clearing. atSR.4 or SR.5 bits set in buffer write (status 98). Clearing. en: 128k von 806SR.4 or SR.5 bits set in buffer write (status 98). Clearing. 4kSR.4 or SR.5 bits set in buffer write (status 98). Clearing. (1SR.4 or SR.5 bits set in buffer write (status 98). Clearing. %)SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. SR.4 or SR.5 bits set in buffer write (status 98). Clearing. DIE ROTEN ZEILEN KOMMEN EIN PAAR HUNDERT MAL!!! Schreibe Daten: 8064k von 8064k (100%) Verifziere Daten: 128k von 8064k (1%)Der Inhalt des Flashs stimmt nicht mit dem geflashten Image Sie koennen die dbox jetzt ausschalten. ------------------------------------------------------------- BootP: Request von 00509C31525B erhalten Error DeleteIpNetEntry: Falscher Parameter. BootP: ARP-Eintrag mit IP: 192.168.168.202 und Mac: 00509C31525B gesetzt BootP: Antwort an 00509C31525B gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C31525B erhalten BootP: ARP-Eintrag mit IP: 192.168.168.202 und Mac: 00509C31525B gesetzt BootP: Antwort an 00509C31525B gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C31525B erhalten BootP: ARP-Eintrag mit IP: 192.168.168.202 und Mac: 00509C31525B gesetzt BootP: Antwort an 00509C31525B gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\flash.img TFTP: Transfer erfolgreich beendet TFTP: Schreibe Backup nach C:\Programme\DBOX_IFA\Backups\2010-03-01 09-04-39_915.img TFTP: Transfer erfolgreich beendet ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC - Paketplaner-Miniport (0) IP-Adresse des Netzwerkadapters: 192.168.168.2 IP-Adresse die die dbox bekommt: 192.168.168.202 Betriebssystem: Microsoft Windows XP Professional Service Pack 3 (Build 2600) CPU 1: Intel Pentium III @ 797 MHz Dateiname des Images: flash.img Imagetyp: Ein Flash DBOX-IFA Version: 3.4 ------ Powered by http://www.dboxservice-hallenberg.de ------ wenn ich die box neu starte kommt nur "kein system" bootlog nach dem flashen: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.2 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-aa.0a.b9.07.00.00-6b debug: HWrev 21 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /root/platform/sagem-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /root/platform/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /root.new/platform/sagem-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /root.new/platform/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) Flash superblock not ok: No bootrecord boot flash /lost+found/root/platform/kernel/os failed dbox2:root> hat jemand ne idee, wo mein denkfehler liegt??? danke schon mal, greetz, separis Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 1. März 2010 Admin Melden Share Geschrieben 1. März 2010 @separis Bist Du Dir sicher, daß Du ein Image für eine 1xI-Box genommen hast? Versuchs's mal mit einem frischen aus dem Download. Was die Bit-Logmeldungen beim Flashen bedeuten, kann ich leider nicht sagen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
separis Geschrieben 2. März 2010 Autor Melden Share Geschrieben 2. März 2010 @ snowhead moin, moin... jap, bin sicher. is aber etwas kurios. laut platine ist´s 100 %ig ne 1xi. als ich aber mit dem hallenberg das original-bn-image einspielen wollte, meinte der flash-assi, es wäre ein 2xi flash. hab dann spasseshalber mal die neuesten kw-images probiert. sowohl 1xi als auch 2xi. beides nix. da ich ja schon alles ausprobiert hab, verschiedene pc´s, crossover, lan mit router, hallenberg, dbox-boot, hab ich die befürchtung, daß es wohl in der hardware der box krieselt. kann mir nur keinen reim machen, wo... mist, da will man einmal vor nem kollegen glänzen... vielleicht hat ja jemand noch ne idee...? greetz, separis Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
separis Geschrieben 11. März 2010 Autor Melden Share Geschrieben 11. März 2010 guten morgen... nur um das thema mal wieder nach vorn zu holen... hat jemand ne ahnung, ob die box hinüber ist, oder ob ich doch irgendwas falsch gemacht habe...??? greetz, separis Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Osprey Geschrieben 11. März 2010 Melden Share Geschrieben 11. März 2010 Flash superblock not ok: No bootrecordboot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed ich denke dein flash wurde abgeschossen Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.