Jump to content

DBOX2 Sagem IDE Interface, HDD mountet nicht

skorpion-23

Von skorpion-23
in Allgemein

Empfohlene Beiträge

skorpion-23

skorpion-23

Geschrieben
Geschrieben

Hallo

Habe heute in meiner dbox2 sagem sat KW-Image 10.08 V.1 1xI eine 2,5" HDD eingebaut nun mein Problem:

Ich kann sie net mounten

 

1. HDD/IDE treibe laden und mounten macht er automatisch

2.erstelle partition ok

initialisiere swap partition ok

formatiere Datenpartition ok

mounte Datenpartition nach hdd nicht ok code 0.0.0

__________________

Link zu diesem Kommentar
Auf anderen Seiten teilen
dietz

dietz

Geschrieben
Geschrieben
Hallo

 

Bin ein stück weiter->

 

erstelle partition ok

initialisiere swap partition ok

formatiere Datenpartition ok

mounte Datenpartition nach hdd ok

 

Mache neustart und drücke auf Aufnahme sagt er:

 

Das Aufnahmeverzeichnis ist net beschreibar deswegen keine Aufnahme möglich

 

Wieso

 

Da musst der box schon sagen wohin sie afnehmen soll.Einstellungen/Aufnahme

Link zu diesem Kommentar
Auf anderen Seiten teilen
  • 3 weeks later...
Airman81

Airman81

Geschrieben
Geschrieben
Wie wäre es, wenn Du mal die Boardsuche mit dem Begriff Bootlog bemühst? Oder ist das zuviel verlangt? ;)

 

Im Bereich Debug/Flashen/Bootmanager-Probleme findest Du eine Anleitung, lesen mußt Du die allerdings selbst, das nehmen wir Dir nicht noch ab.

 

ich bekomme immer einen fehler beim ausführen des hdd setup tools.

mach nun mal ne bootlog.

beim mounten kommt der fehler!

 

 

 

/lib/modules/2.4.36.2-dbox2/misc/avia_av.o was compiled for kernel versi

on 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_core: masking unhandled irq reg 0 bit 1

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.2-dbox2/misc/ves1820.v12.o was compiled for kernel v

ersion 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

DVB: registering frontend 0:0 (VES1893)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

/var/etc/init.d/rcS: line 287: cannot create /etc/issue.net: No space left on de

vice

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.260 2008/03/

24 19:14:50 dbt Exp $

[sectionsd] Caching max 1500 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 120min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[eitThread] pid 231 start

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

avia_gt_core: masking unhandled irq reg 0 bit 7

/var/plugins/operations camd_start

insmod: warning: kernel-module version mismatch

/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

DBox2 Multicam Driver v1.01 skars & doz21 :)

starte capmtserver

 

capmtserver provides pmt info, for non-enigma platforms

 

starte CCcam

05:40:42.876 CCcam: ============================================================

==========

05:40:42.949 CCcam: starting CCcam 2.0.11 compiled on Dec 3 2008@20:54:02

05:40:43.011 CCcam: ============================================================

==========

05:40:43.122 CCcam: online using nodeId e53f7e8cc6e5ea53

05:40:43.220 CCcam: dvb api3 detected

05:40:43.274 CCcam: create 1 cam device(s)

05:40:43.560 CCcam: added 200 keys from /var/keys/SoftCam.Key

05:40:43.972 CCcam: added 367 keys from /var/keys/AutoRoll.Key

05:40:44.047 CCcam: added 9 keys from /var/keys/constant.cw

05:40:44.117 CCcam: parsed 0 entries from /var/etc/CCcam.prio

05:40:44.171 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or no

t found

05:40:44.241 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or n

ot found

05:40:44.309 CCcam: server started on port 12000

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 2 onid 85

[getservices] dup transponder id 4 onid 85

05:40:46.341 CCcam: keyfile changed. Updating...

05:40:46.516 CCcam: added 200 keys from /var/keys/SoftCam.Key

[getservices] dup transponder id 1 onid 85

05:40:46.550 CCcam: static keyfile changed. Updating...

05:40:46.692 CCcam: added 9 keys from /var/keys/constant.cw

05:40:46.740 CCcam: configfile changed. Updating...

05:40:46.763 CCcam: ignorelist changed. Updating...

05:40:46.815 CCcam: parsed 0 entries from /var/etc/CCcam.prio

05:40:46.866 CCcam: autoroll keyfile changed. Updating...

05:40:47.242 CCcam: added 367 keys from /var/keys/AutoRoll.Key

/tmp/currentservices.xml: No such file or directory

$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

 

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[controld] format: 4:3(LB)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[sectionsd] getUTC: read: Connection timed out

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[yhttpd] Webserver starting...

/var/plugins/operations sect_renice

/var/plugins/operations epg_reinit

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] received 43 sats

[neutrino] registering as event client

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] initialized everything

05:41:27.908 CCcam: cam[0] set PMT for sid=6d66

PES, queue 0 normal.

[CBasicClient] connect failed: /tmp/camd.socket

avia_gt_core: masking unhandled irq reg 1 bit 15

/tmp/camd.socket: Connection refused

05:41:27.952 CCcam: start EMM

[CBasicClient] connect failed: /tmp/camd.sock01

05:41:28.300 CCcam: EMM demux 1 set

/tmp/camd.sock01: No such file or directory

[CBasicClient] connect failed: /tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)

[sectionsd] getUTC: read: Connection timed out

[timeThread] - 02.01.2009 12:21:46, tim: Fri Jan 2 12:21:46 2009

[timeThread] Time set via DVB, going to sleep for 1800 seconds.

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for writing.

[LCDFONT] FTC_Face_Requester (Fix12/Regular)

[CPlugins] (id,val):(fd_lcd,21)

[CPlugins] (id,val):(rcblk_rep,150)

[CPlugins] (id,val):(rcblk_anf,125)

[CPlugins] (id,val):(fd_rcinput,18)

[CPlugins] (id,val):(fd_framebuffer,3)

[CPlugins] try exec...

shellexec Version 2.42

<Font "/share/fonts/micron_bold.ttf" loaded>

touch: /var/etc/.test_platzer: No space left on device

rm: cannot remove '/var/etc/.test_platzer': No such file or directory

 

msgbox Message-Box Version 1.66

 

msgbox Message-Box Version 1.66

swapoff: /dev/ide/host0/bus0/target0/lun0/part1

rm: cannot remove '/var/etc/.ide_*': No such file or directory

 

The number of cylinders for this disk is set to 19457.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

 

Command (m for help): o

Building a new DOS disklabel. Changes will remain in memory only,

until you decide to write them. After that the previous content

won't be recoverable.

 

 

The number of cylinders for this disk is set to 19457.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

(e.g., DOS FDISK, OS/2 FDISK)

Warning: invalid flag 0x00,0x00 of partition table 4 will be corrected by w(rite

)

 

Command (m for help):

Command action

e extended

p primary partition (1-4)

 

Partition number (1-4):

First cylinder (1-19457, default 1):

Last cylinder or +size or +sizeM or +sizeK (1-19457, default 19457):

 

Command (m for help):

Command action

e extended

p primary partition (1-4)

 

Partition number (1-4):

First cylinder (14-19457, default 14): Using default value 14

Last cylinder or +size or +sizeM or +sizeK (14-19457, default 19457): Using defa

ult value 19457

 

Command (m for help):

Command (m for help):

Partition number (1-4):

Hex code (type L to list codes):

Changed system type of partition 1 to 82 (Linux swap)

 

Command (m for help):

 

Disk /dev/ide/host0/bus0/target0/lun0/disc: 160.0 GB, 160041885696 bytes

255 heads, 63 sectors/track, 19457 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

 

Device Boot Start End Blocks

Id System

/dev/ide/host0/bus0/target0/lun0/part1 1 13 104391

82 Linux swap

/dev/ide/host0/bus0/target0/lun0/part2 14 19457 156183930

83 Linux

 

Command (m for help):

The partition table has been altered!

 

Calling ioctl() to re-read partition table

/dev/ide/host0/bus0/target0/lun0: p1 p2

 

msgbox Message-Box Version 1.66

 

msgbox Message-Box Version 1.66

Setting up swapspace version 1, size = 106892288 bytes

 

msgbox Message-Box Version 1.66

 

msgbox Message-Box Version 1.66

meta-data=/dev/ide/host0/bus0/target0/lun0/part2 isize=256 agcount=16, agsize

=2440373 blks

= sectsz=512 attr=0

data = bsize=4096 blocks=39045968, imaxpct=25

= sunit=0 swidth=0 blks, unwritten=1

naming =version 2 bsize=4096

log =internal log bsize=4096 blocks=19065, version=2

= sectsz=512 sunit=0 blks, lazy-count=0

realtime =none extsz=4096 blocks=0, rtextents=0

touch: /var/etc/.ide_xfs: No space left on device

 

msgbox Message-Box Version 1.66

 

msgbox Message-Box Version 1.66

Adding Swap: 104380k swap-space (priority -2)

mount: can't find /hdd in /etc/fstab

 

/dev/ide/host0/bus0/target0/lun0/disc:

setting acoustic management to 128

setting drive write-caching to 0 (off)

setting standby to 72 (6 minutes)

write-caching = 0 (off)

acoustic = 128 (128=quiet ... 254=fast)

 

msgbox Message-Box Version 1.66

Link zu diesem Kommentar
Auf anderen Seiten teilen
FlashErase

FlashErase

Geschrieben
Geschrieben
...

/var/etc/init.d/rcS: line 287: cannot create /etc/issue.net: No space left on de

vice

...

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for writing.

...

touch: /var/etc/.test_platzer: No space left on device

rm: cannot remove '/var/etc/.test_platzer': No such file or directory

...

rm: cannot remove '/var/etc/.ide_*': No such file or directory

...

touch: /var/etc/.ide_xfs: No space left on device

Dein Image ist geplatzt. Entweder defragmentieren oder neu Flashen und beim nächsten Mal überlegen, was man unbedingt alles zusätzlich in den begrenzen Flash der Box packen will.

Link zu diesem Kommentar
Auf anderen Seiten teilen
Airman81

Airman81

Geschrieben
Geschrieben
Dein Image ist geplatzt. Entweder defragmentieren oder neu Flashen und beim nächsten Mal überlegen, was man unbedingt alles zusätzlich in den begrenzen Flash der Box packen will.

ok spiel es gerade neu drauf !

das heisst es wurde zu viel speicher in anspruch genommen oder was ?

 

ok jetzt gehts!

besten dank!

Link zu diesem Kommentar
Auf anderen Seiten teilen

Archiviert

Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.

Gehe zur Themenübersicht

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...