Skeleton Geschrieben 22. Juni 2008 Melden Share Geschrieben 22. Juni 2008 Hallo, meine Nokia lässt sich mit dem Bootmanager flashen aber beim Neustart bleibt Sie stehen. Kann jemand in meinem Bootlog einen Fehler entdecken der auf defekte Hardware hinweist? Hier das Bootlog: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-38.79.43.07.00.00-fd debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x7ffe0, size= 153668 verify sig: 262 Branching to 0x3fff U-Boot 1.1.2 (Tuxbox) (Dec 28 2005 - 01:56:29) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 SQUASHFS error: squashfs_readdir: read_block ### FS LOAD ERROR<0> for vmlinuz! ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Bad Magic Number => Vielen Dank für Eure Hilfe Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 22. Juni 2008 Melden Share Geschrieben 22. Juni 2008 Auf jeden Fall ist das Image auf der Box defekt. Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 SQUASHFS error: squashfs_readdir: read_block ### FS LOAD ERROR for vmlinuz! ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Bad Magic Number Wenn das Image selbst fehlerfrei ist und korrekt zur Box übertragen wurde, könnte ein Defekt im Flashspeicher vorliegen. Beides ist aus Deinem Bootlog nicht zu erkennen, dazu solltest Du ein Log vom Flashvorgang posten. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Skeleton Geschrieben 22. Juni 2008 Autor Melden Share Geschrieben 22. Juni 2008 Hallo, vielen Dank für die Hilfe. Jetzt habe ich nochmal gefasht. Keywelt Image vom April 2008. Bootvorgang bleibt wieder bei "Loading Kernel" stehen. was für n Shit! Hier das Flashlog: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-38.79.43.07.00.00-fd debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.100.21, My IP 192.168.100.123 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash will verify ELF image, start= 0x7ffd, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x3fff ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-1e-f3-be FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.100.21; our IP address is 192.168.100.123 Filename 'C/Programme/tftpboot/logo-lcd'. Load address: 0x12fffg Loading: ## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.100.21; our IP address is 192.168.100.123 Filename 'C/Programme/tftpboot/logo-fb'. Load address: 0x11fffg Loading: ######### done FB logo at: 0x0 (0x1FBFCW bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 dbox2-ppcboot> bootp 120000 /D/DBox2/Keywelt_V1_April_2x_SQUASHFS_2008/Keywelt_V 1_April_2x_SQUASHFS_2008.img BOOTP broadcast 1 TFTP from server 192.168.100.21; our IP address is 192.168.100.123 Filename '/D/DBox2/Keywelt_V1_April_2x_SQUASHFS_2008/Keywelt_V1_April_2x_SQUASHF S_2008.img'. Load address: 0x11fffg Loading: ####################################################################### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################# done dbox2-ppcboot> protect off 10020000 107fffff ............................................................... Un-Protected 63 sectors dbox2-ppcboot> erase 10020000 107fffff Erase Flash from 0x1001dff0 to 0x107fffff sector 66 .... done Erased 63 sectors dbox2-ppcboot> cp.l 120000 10020000 1F8000 Copy to Flash... done dbox2-ppcboot> Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 22. Juni 2008 Melden Share Geschrieben 22. Juni 2008 Image wurde laut Flashlog korrekt zur Box übertragen, beim Flashen gab es auch keine Fehlermeldung. Da wird die Box wohl ein Fall für Reparatur sein. Frage mal bei Ralf-Jürgen Bader an und lasse die Box von ihm überprüfen. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.