DaveGuru Geschrieben 10. Juni 2008 Melden Share Geschrieben 10. Juni 2008 Hallo Leute, meine DBox2 hat auf einmal aufgehört zu leben... heul!!! Sie startet und bleibt dann einfach stehen. Habe das BootLog rausgeholt: /debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-4d.60.29.07.00.00-8a debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162992 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Jan 18 2008 - 21:28:14) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. env: found "console" env: found "lcd_inverse" env: found "lcd_contrast" FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 669940 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 669876 Bytes = 654.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.36-dbox2 (image@Server) (gcc version 3.4.6) #11 Fr Jan 18 21:2 8:45 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:51:09 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f SQUASHFS error: lzma_fs returned unexpected result 0x1 SQUASHFS error: Unable to read page, block 190df0, size 613f Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Bad emulation init/1 NIP: 0ff4a7e8 instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0 pte @ 0x ff4a7e8: (0xc1eb70fc)->(0xc1e76d28)->0x01d63889 RPN: 01d63 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1 Kernel VA for NIP 0xc1d637e8 pte @ 0xc1d637e8: no pmd Kann mir jemand weiter helfen? Woran liegt es? Ich wäre euch für Rettungsvorschläge sehr dankbar. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
merkwuerden Geschrieben 10. Juni 2008 Melden Share Geschrieben 10. Juni 2008 Flashe die Box mit Bootmanager oder Hallenberg Assistent neu. Das Image im Flash ist hinüber. Hilft neu flashen nicht, hat die Box wohl einen Defekt. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
medionpc Geschrieben 12. Juni 2008 Melden Share Geschrieben 12. Juni 2008 Nimm mal die DSid ausm Logfile! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.