Nokia Sat bleibt stehen?

[santa81]

Hallo auch,

 

zuerst einmal, meine 3Boxen laufen super, nur die von meiner Mutter nicht!

Und sowas gibt schnell mecker!!

 

Ist ne Nokia Sat, 2x1 Avia 600

 

Also, die Box lief bis vor kurzen einwandfrei, nur leider will sie jetzt nicht mehr,

wenn sie kalt ist läuft die box fast normal nur das das Bild immer 1pro Sek.

stehen bleibt, selten Mosaike, Ton i.O. MER/SIG Top, BER gleich 0

getestet auf 3 Satanlagen, Testhalber verschiedenste Images geflasht, auch

PB- Enigma, Sendersuchlauf findet da auch alle Sender.

Da lief die Box auch mehrere Minuten ohne Fehler durch, jetzt leider nur noch

schwarzes Bild, ab und an ein Tonknacken, aber mehr ist nicht.

 

Habe hier ewig gesucht aber nix gefunden, habe spaßhalber nochmal sep06

geflasht um den Tunemode zu testen, brachte aber auch kein Bild mehr.

 

Habe jetzt keine Idee mehr, Tuner sollte ja eigentlich in Ordnung sein, oder??

 

Nen Bekannter hat beim Displaywechsel seine Box geschrottet (also Frontprozessor

denke ich ist da defekt) sollte ich evtl doch den Tunerblock von der Box in meine

löten?

 

Vielen Dank für Ideen und Ratschläge.

 

mfg

santa

 

Edit:

ohne Emu auf allen Sendern

[merkwuerden]

Eventuell hat die Box ein thermisches Problem und wird zu heiß?

 

Und ansonsten: Bootlog posten.

[santa81]

Eventuell hat die Box ein thermisches Problem und wird zu heiß?

 

Und ansonsten: Bootlog posten.

 

 

Habe die Box schon mit Kältespray bearbeitet, nix, das dachte ich auch!

 

Bootlog sieht merkwürdig aus:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-2c.08.83.07.00.00-e3
debug: HWrev 09  FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 154948
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42)

CPU:   PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
      Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: ... done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
 1: Console on null
 2: Console on ttyS0
 3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 696900 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
  Image Name:   dbox2
  Image Type:   PowerPC Linux Kernel Image (gzip compressed)
  Data Size:    696836 Bytes = 680.5 kB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09:
34 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:9c:8b
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "FLFS (U-Boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started:  BusyBox v1.1.3 (2006.08.31-18:14+0000) multi-call mount: Mounting
/dev/mtdblock/2 on /var failed: No such file or directory
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
 Vendor: Nokia
 Model: D-BOX2 
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos 
Exp $
avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension
options:
(demux reinit)  enx_reset=1
(framer chan.)  fc_reset=1
(clr avia reg)  avia=0
(enx td trace)  trace=1
(lock, unlock)  spinlock=0
Schreiben ueber /proc/bus/gtx
(delay)         delay=500
Starting the automounter

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/plugins/operations logcs_init
/var/plugins/operations camd_init
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[sectionsd] getUTC: read: Connection timed out
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] received 43 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[CBasicClient] connect failed: /tmp/camd.socket
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock01
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
/tmp/camd.sock02: No such file or directory
PCR discontinuity: PCR: 0x1A2234B94, OLDPCR: 0x1A2229775, Diff: 46111
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
PCR discontinuity: PCR: 0x1A224FBFC, OLDPCR: 0x1A223F3C5, Diff: 67639
PCR discontinuity: PCR: 0x1A22A90CA, OLDPCR: 0x1A229C4BF, Diff: 52235
PCR discontinuity: PCR: 0x1A22E2D7A, OLDPCR: 0x1A22D914B, Diff: 39983
PCR discontinuity: PCR: 0x1A22F71A8, OLDPCR: 0x1A22EC974, Diff: 43060
PCR discontinuity: PCR: 0x1A2342E66, OLDPCR: 0x1A2338641, Diff: 43045
[sectionsd] getUTC: read: Connection timed out
PCR discontinuity: PCR: 0x1A23BF7B8, OLDPCR: 0x1A23B5BB3, Diff: 39941
PCR discontinuity: PCR: 0x1A2469D80, OLDPCR: 0x1A246017F, Diff: 39937
PCR discontinuity: PCR: 0x1A24895CA, OLDPCR: 0x1A247F9A9, Diff: 39969
PCR discontinuity: PCR: 0x1A2514F4A, OLDPCR: 0x1A250BF26, Diff: 36900
[timeThread] - 11.03.2008 21:57:53, tim: Tue Mar 11 21:57:53 2008
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
PCR discontinuity: PCR: 0x1A2585886, OLDPCR: 0x1A257BC45, Diff: 40001
PCR discontinuity: PCR: 0x1A25BDCFB, OLDPCR: 0x1A25B34D9, Diff: 43042
PCR discontinuity: PCR: 0x1A265569B, OLDPCR: 0x1A264BA7E, Diff: 39965
PCR discontinuity: PCR: 0x1A2666ABE, OLDPCR: 0x1A2659E9D, Diff: 52257
PCR discontinuity: PCR: 0x1A26AD396, OLDPCR: 0x1A26A1FA9, Diff: 46061
PCR discontinuity: PCR: 0x1A26D73EC, OLDPCR: 0x1A26C5FC9, Diff: 70691
PCR discontinuity: PCR: 0x1A27140A7, OLDPCR: 0x1A270A486, Diff: 39969
PCR discontinuity: PCR: 0x1A2720CC1, OLDPCR: 0x1A271588C, Diff: 46133
PCR discontinuity: PCR: 0x1A274955C, OLDPCR: 0x1A2740511, Diff: 36939
PCR discontinuity: PCR: 0x1A2772983, OLDPCR: 0x1A27681CC, Diff: 42935
PCR discontinuity: PCR: 0x1A2798DF1, OLDPCR: 0x1A278F1F0, Diff: 39937
PCR discontinuity: PCR: 0x1A27ABA20, OLDPCR: 0x1A27A1210, Diff: 43024
PCR discontinuity: PCR: 0x1A27CCA80, OLDPCR: 0x1A27C2E6A, Diff: 39958
PCR discontinuity: PCR: 0x1A280C746, OLDPCR: 0x1A2803714, Diff: 36914
PCR discontinuity: PCR: 0x1A282BF8C, OLDPCR: 0x1A2822F6F, Diff: 36893
PCR discontinuity: PCR: 0x1A286F83C, OLDPCR: 0x1A2866820, Diff: 36892
PCR discontinuity: PCR: 0x1A2884879, OLDPCR: 0x1A2877C55, Diff: 52260

 

 

Was bedeuten diese PCR discontinuity?? die kommen nur und ständig!

[merkwuerden]

Was bedeuten diese PCR discontinuity?? die kommen nur und ständig!

Das genau ist der Grund für Deine Probleme. Der MPEG-Datenstrom ist kaputt und kann von der Box nicht mehr vernünftig decodiert werden. Oder wird am Ende auch erst beim Empfang in der Box kaputt gemacht. Könnte durchaus ein Tunerproblem sein, aber auch ein anderweitiger Hardwaredefekt. Im Bootlog sehe ich aber nichts Außergewöhnliches außer diesen PCR-Meldungen.

 

Tritt das auf allen Kanälen auf, oder nur auf einzelnen? Wenn ja, bei welchen?

 

Da Du ja bereits andere Images ausprobiert hast, schließe ich ein defektes Image aus.

[santa81]

Tritt das auf allen Kanälen auf, oder nur auf einzelnen? Wenn ja, bei welchen?

 

ja bei allen, Emu oder sonstiges nicht aktiv.

 

Denke auch, das ein Hardwaredefekt vorliegt, frage nur welche/s Bauteil(e) und

kann ich das tauschen (habe noch ne defekte Box rumliegen)?

 

mfg

santa

[merkwuerden]

Ich würde die Box mal von einem Fachmann untersuchen lassen. Denn was da nun hin sein könnte, kann man per Ferndiagnose kaum klären. Frage doch mal bei Ralf-Jürgen Bader an.

[miro17]

Tippe mal auf den Bildprozessor...

 

Würde auch sagen das du das mal von einem Fachmann checken lassen solltest.

 

gruß Miro