joshi12 Geschrieben 14. Februar 2008 Melden Share Geschrieben 14. Februar 2008 hallo, ich habe folgendes problem... ich habe eine dbox2 nokia 2xi bekommen, welche schon im debugmodus ist, als ich sie bekommen hatte ist sie beim booten immer stehen geblieben mit dem fehler "kein system". wenn ich nun sie flashen möchte, startet das flashen immer wieder von vorne. ich mach das flashen mit dem hallenberg-flashing-assistent. hier ist auch der bootlog, (ich habe dann einfach abgebrochen)... ich hoffe es kann mir jemand helfen...??? Édebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:44:84:b2 dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 (RO) 10040000 (RO) 10060000 (RO) 10080000 (RO) 100A0000 (RO) 100C0000 (RO) 100E0000 (RO) 10100000 (RO) 10120000 (RO) 10140000 (RO) 10160000 (RO) 10180000 (RO) 101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO) 10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO) 102A0000 (RO) 102C0000 (RO) 102E0000 (RO) 10300000 (RO) 10320000 (RO) 10340000 (RO) 10360000 (RO) 10380000 (RO) 103A0000 (RO) 103C0000 (RO) 103E0000 (RO) 10400000 (RO) 10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO) 104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO) 10520000 (RO) 10540000 (RO) 10560000 (RO) 10580000 (RO) 105A0000 (RO) 105C0000 (RO) 105E0000 (RO) 10600000 (RO) 10620000 (RO) 10640000 (RO) 10660000 (RO) 10680000 (RO) 106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO) 10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO) 107A0000 (RO) 107C0000 (RO) 107E0000 (RO) Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# ## done Bytes transferred = 675073 (a4d01 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 675009 Bytes = 659.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Console: colour dummy device 80x25 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:44:84:b2 dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 10040000 10060000 10080000 100A0000 100C0000 100E0000 10100000 10120000 10140000 10160000 10180000 101A0000 101C0000 101E0000 10200000 10220000 10240000 10260000 10280000 102A0000 102C0000 102E0000 10300000 10320000 10340000 10360000 10380000 103A0000 103C0000 103E0000 10400000 10420000 10440000 10460000 10480000 104A0000 104C0000 104E0000 10500000 10520000 10540000 10560000 10580000 105A0000 105C0000 105E0000 10600000 10620000 10640000 10660000 10680000 106A0000 106C0000 106E0000 10700000 10720000 10740000 10760000 10780000 107A0000 107C0000 107E0000 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# ## done Bytes transferred = 675073 (a4d01 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 675009 Bytes = 659.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Console: colour dummy device 80x25 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:44:84:b2 dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 10040000 10060000 10080000 100A0000 100C0000 100E0000 10100000 10120000 10140000 10160000 10180000 101A0000 101C0000 101E0000 10200000 10220000 10240000 10260000 10280000 102A0000 102C0000 102E0000 10300000 10320000 10340000 10360000 10380000 103A0000 103C0000 103E0000 10400000 10420000 10440000 10460000 10480000 104A0000 104C0000 104E0000 10500000 10520000 10540000 10560000 10580000 105A0000 105C0000 105E0000 10600000 10620000 10640000 10660000 10680000 106A0000 106C0000 106E0000 10700000 10720000 10740000 10760000 10780000 107A0000 107C0000 107E0000 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# ## done Bytes transferred = 675073 (a4d01 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 675009 Bytes = 659.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Console: colour dummy device 80x25 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:44:84:b2 dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 10040000 10060000 10080000 100A0000 100C0000 100E0000 10100000 10120000 10140000 10160000 10180000 101A0000 101C0000 101E0000 10200000 10220000 10240000 10260000 10280000 102A0000 102C0000 102E0000 10300000 10320000 10340000 10360000 10380000 103A0000 103C0000 103E0000 10400000 10420000 10440000 10460000 10480000 104A0000 104C0000 104E0000 10500000 10520000 10540000 10560000 10580000 105A0000 105C0000 105E0000 10600000 10620000 10640000 10660000 10680000 106A0000 106C0000 106E0000 10700000 10720000 10740000 10760000 10780000 107A0000 107C0000 107E0000 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# ## done Bytes transferred = 675073 (a4d01 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 675009 Bytes = 659.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Console: colour dummy device 80x25 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:44:84:b2 dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 1 0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 10040000 10060000 10080000 100A0000 100C0000 100E0000 10100000 10120000 10140000 10160000 10180000 101A0000 101C0000 101E0000 10200000 10220000 10240000 10260000 10280000 102A0000 102C0000 102E0000 10300000 10320000 10340000 10360000 10380000 103A0000 103C0000 103E0000 10400000 10420000 10440000 10460000 10480000 104A0000 104C0000 104E0000 10500000 10520000 10540000 10560000 10580000 105A0000 105C0000 105E0000 10600000 10620000 10640000 10660000 10680000 106A0000 106C0000 106E0000 10700000 10720000 10740000 10760000 10780000 107A0000 107C0000 107E0000 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# ## done Bytes transferred = 675073 (a4d01 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 675009 Bytes = 659.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Console: colour dummy device 80x25 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> seteth ethaddr 0x1001ffe3 ethaddr: 00:50:9c:44:84:b2 dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140008 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'C/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Lo ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: SiS 900-basierte PCI-Fast Ethernet-Adapter - Paketplaner-Miniport (0) IP-Adresse des Netzwerkadapters: 192.168.1.84 IP-Adresse die die dbox bekommt: 192.168.1.202 Comport: Kommunikationsanschluss (COM1) Betriebssystem: Microsoft Windows 2000 Professional (Build 2195) CPU 1: AMD Athlon XP 2400+ @ 2000 MHz Dateiname des Images: backup20080130192351765.img Imagetyp: Zwei Flashs DBOX-IFA Version: 2.3 ------ Powered by http://www.dboxservice-hallenberg.de-------- Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
sylver Geschrieben 14. Februar 2008 Melden Share Geschrieben 14. Februar 2008 Du hängst in der Bootschleife. Wie hast du geflasht? So > Hallenbergassistent, Crossover & Nullmodemkabel? Hast du nochmal versucht zu flashen? Wenn du nach mehrmaligem Flashen nicht aus der Bootschleife raus kommst, handelt es sich meistens um ein Hardwareproblem. Schau mal hier in die Suchfunktion: Bootschleife > Drück mich < Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
joshi12 Geschrieben 17. Februar 2008 Autor Melden Share Geschrieben 17. Februar 2008 hallo, also ich habe es mit dem alten hallenberg gemacht mit nullmodemkabel und crossoverkabel gemacht. ich habe es jetzt mit dem neuen hallenberg probiert und es funktioniert wieder nicht. was kann ich nur machen???? hier nochmal der log mit dem neuen hallenberg : Édebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 626108 (98dbc hex) Using SCC ETHERNET device TFTP from server 192.168.1.84; our IP address is 192.168.1.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################# done Bytes transferred = 579075 (8d603 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626044 Bytes = 611.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 579011 Bytes = 565.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f21000, end 01fae5c3 ... OK Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.1.202:192.168.1.84:::::off Decrementer Frequency = 251625000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2580) Console: colour dummy device 80x25 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.2 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.84, My IP 192.168.1.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.