Nokia Dbox2 braucht ewig beim hochfahren

carracer · 8. Dezember 2007

Meine Box braucht seit neuem viel länger beim starten, wer kann mir da helfen?

Hab mal ein Bootlog erstellt.

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2007-11-27 16:39:07 CET)

##### Image-Version: Keywelt_Nov2007_V1 #####

Tue Nov 27 16:54:00 UTC 2007

Starting MMC-Support

Journalled Block Device driver loaded

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc2: Hardware init

mmc: Card init

mmc: error in mmc_card_init (1)

mmc: error in mmc_init (-1)

Oops: kernel access of bad area, sig: 11

NIP: C000D91C XER: 00000000 LR: C000D910 SP: C1BEBDA0 REGS: c1bebcf0 TRAP: 0300

Not tainted

MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: 00000000, DSISR: C2000000

TASK = c1bea000[49] 'rmmod' Last syscall: 129

last math 00000000 last altivec 00000000

GPR00: 00001032 C1BEBDA0 C1BEA000 00000001 00009032 00000001 C1BF1004 00001BF0

GPR08: C01E4330 C1BEBDD8 00000040 00000000 22004042 10081E24 00000000 00000000

GPR16: 00000000 00000000 00000000 00000000 00009032 01BEBF40 00000000 C0002AA8

GPR24: C1BEBE80 10003EC4 C1BEBDD0 00000880 C0164374 C1BEBDD0 C0164360 C0164370

Call backtrace:

C1BEBDF0 C0007600 C0060B0C C005AF34 C3894698 C001124C C0011390

C000285C 1002F0E4 10003D30 10003D68 10003F28 0FEB658C 00000000

Segmentation fault

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

mmc2 Driver $Id: mmc2.c,v 1.4 2007/05/20 13:42:05 satsuse Exp $

mmc: can't get major 121

insmod: init_module: mmc2: Device or resource busy

MMC Startup failed

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $

ide: late registration of driver.

dboxide: activating cs2

dboxide: address space of IDE-Interface is at: 0xc38b4000

Probing IDE interface ide0...

hda: SAMSUNG HD400LD, ATA DISK drive

Unhandled interrupt 2f, disabled

ide0 at 0x010-0x017,0x04e on irq 47

hda: attached ide-disk driver.

hda: host protected area => 1

warte auf 'init_ide'

hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63

Partition check:

/dev/ide/host0/bus0/target0/lun0: p1 p2

Adding Swap: 104380k swap-space (priority -1)

warte auf 'init_ide'

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

/dev/ide/host0/bus0/target0/lun0/disc:

setting acoustic management to 128

setting drive write-caching to 0 (off)

setting standby to 72 (6 minutes)

write-caching = 1 (on)

acoustic = 128 (128=quiet ... 254=fast)

'init_ide' fertig

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Nokia

Model: D-BOX2

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel vers

ion 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

[i2c-8xx]: mpc 8xx i2c init

i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0

i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC

8xx I2C adapter](pos. 0).

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kerne

l version 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

i2c-core.o: driver i2c audio/video switch driver registered.

i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos

. 1).

i2c-core.o: driver saa7126 registered.

i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos

. 2).

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

i2c-core.o: driver DBox2-CAM registered.

i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p

os. 3).

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

i2c-core.o: driver DVB I2C bridge registered.

i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C adapt

er](pos. 4).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/avia_av.o was compiled for kernel versi

on 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/ves1820.o was compiled for kernel versi

on 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

DVB: registering frontend 0:0 (VES1893)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.249 2007/10/

30 08:48:23 seife Exp $

[sectionsd] Caching max 6000 events

[sectionsd] Caching 14 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

/var/plugins/operations camd_init

/var/plugins/operations: cd: line 60: can't cd to /var/bin

/var/plugins/operations cardserver_start

/var/plugins/operations: cd: line 60: can't cd to /var/bin

$Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

/var/plugins/operations camd_start

/var/plugins/operations: cd: line 60: can't cd to /var/bin

insmod: warning: kernel-module version mismatch

/var/modules/multicam.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starte mgcamd

chmod: /var/bin/mgcamd: No such file or directory

/var/plugins/operations: line 696: mgcamd: not found

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[getservices] dup transponder id 457 onid 1

/tmp/currentservices.xml: No such file or directory

$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[sectionsd] getUTC: read: Connection timed out

[basicsocket] send_data: Resource temporarily unavailable

[yhttpd] Webserver starting...

/var/plugins/operations sect_renice

/var/plugins/operations: cd: line 60: can't cd to /var/bin

/var/plugins/operations epg_reinit

/var/plugins/operations: cd: line 60: can't cd to /var/bin

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] received 44 sats

[neutrino] registering as event client

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] initialized everything

freq=2424250000 ratio=250000 div=25e1 pe=1

avia_gt_core: masking unhandled irq reg 0 bit 6

PES, queue 0 normal.

avia_gt_core: masking unhandled irq reg 0 bit 7

[CBasicClient] connect failed: /avia_gt_core: masking unhandled irq reg 1 bit 15

tmp/camd.socket

/tmp/camd.socket: No such file or directory

[CBasicClient] connect failed: /tmp/camd.sock01

/tmp/camd.sock01: No such file or directory

[CBasicClient] connect failed: /tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)

[timeThread] - 08.12.2007 16:05:02, tim: Sat Dec 8 16:05:02 2007

[timeThread] Time set via DVB, going to sleep for 1800 seconds.

SnowHead · 8. Dezember 2007

@carracer

Wähle den richtigen, zu Deiner Interfacekarte passenden, MMC-Treiber

aus oder deaktiviere ihn ganz, wenn Du keine MMC stecken hast.

carracer · 8. Dezember 2007

wie weiß ich denn was der beste Treiber ist, hab eine 32 MB Karte von meinem Handy drin.

carracer · 8. Dezember 2007

So jetzt hab i einfach mal alle Treiber probiert. Der einzige Treiber der funzt ist bei mr der mmc2 Treiber.

MMC Dateisystem=ext3

MMC Zugriff optimieren= ein

MMC force HW=aus

MMC Swap Partition=aus

Manchmal muss i auch die Box ein paar mal starten bis die Karte geht.

Irgend einen Vorschlag?

carracer · 9. Dezember 2007

Keinen Vorschlag?

SnowHead · 9. Dezember 2007

@carracer

Keinen außer die Hardware zu überprüfen und testhalber mal ganz ohne

MMC-Treiber zu starten. Btw: wenn als Treiber "mmc2" ausgewählt ist,

ist die von Dir oben angegebene Einstellung "MMC Zugriff optimieren= ein"

nicht möglich. Die wird bei diesem Treiber standardmäßig vom Menü auf

"aus" gestellt, da der Treiber sie nicht unterstützt.

carracer · 9. Dezember 2007

So hab jetzt den MMC Treiber deaktiviert ist aber auch nicht besser.

Anmelden

Nokia Dbox2 braucht ewig beim hochfahren

Empfohlene Beiträge

carracer

Link zu diesem Kommentar

Auf anderen Seiten teilen

SnowHead

Link zu diesem Kommentar

Auf anderen Seiten teilen

carracer

Link zu diesem Kommentar

Auf anderen Seiten teilen

carracer

Link zu diesem Kommentar

Auf anderen Seiten teilen

carracer

Link zu diesem Kommentar

Auf anderen Seiten teilen

SnowHead

Link zu diesem Kommentar

Auf anderen Seiten teilen

carracer

Link zu diesem Kommentar

Auf anderen Seiten teilen

Archiviert

Wer ist Online 0 Benutzer

Keywelt-Board

Aktivitäten