Dbox braucht mindestens 3 startversuche

marvbh · 21. August 2007

Hallo leute,

Ich hab das V2 September Image drauf. Und bin echt zufrieden.

Meine Sagem zwitschert auch nur ganz selten

Aber wenn ich meine am nächsten Tag neu starte kommt erst das bild (für ca. 5-10 sekunden) und dann friert das Bild ein. Dann kann ich nur noch die Box über das Menü neu starten. Was anderes ist nicht mehr möglich. Nach ca. 3 bis 10 mal funktioniert das Teil.

Ich hoffe das es eine kalte Lötstelle ist. Aber wo?

Hat jemand von euch auch solche erfahrungen gemacht? Kennt Ihr sowas auch?

Was vermutet Ihr?

Ist es Hardware oder Software? Ich vermute Hardware.

Ist es Netzteil oder Tuner oder was anderes?

Bin für jeden Hinweis dankbar!!

Klo · 22. August 2007

Hi...

Erstell mal ein Bootlog mit dem Dbox Bootmanager, vielleicht ist darin ein Hardwaredefekt zu erkennen !

Gruß

Klo

marvbh · 22. August 2007

Hi,

also es wird immer schlimmer! Gestern hat sie jedes mal einfach so beim ersten mal gebootet und ist auch nicht abgestürzt.

Heute hat sie bestimme 10mal gebraucht.

Als ich dann das nullmodemkabel angeschlossen hatte mat sie einen Kernel Panic gemacht.

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

C00E49D8 SP: C1FEBC20 REGS: c1fe<4>Oops: kernel access of bad area, sig: 11

NIP: C00E4A14 XER: C000717F LR: DAR: 0000007B, DSISR: C0000000

bb70 TRAP: 0300 Not tainted

MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

00000000

TASK = c1fea000[1] 'swapper' Last syscall: 120

last math 00000000 last altivec GPR08: C0190000 C0160000 FFFFFFFGPR00: 64F67000

C1FEBC20 C1FEA000 00000000 0000DF80 3AC19DC6 00000000 C1F59200

4 00000000 00001032 C0160000 C1FF C01948AC 55303C33 000328A4 01FFBA00 00000001

GPR16: FFFFFFFF 007FFF00 01FF6118010F C0A80118

EBCD8 0000010A

Call backtrace: C1F44080 00000000 00000000 C1F59200 00000002 C0A

C1EFC000 C00E763C C00D5F3C C00D6058 C00D61BC C001498C C0003C20

C0161470 C00022A0

C000511C

C0002AA0 00000000 C000F784 C000FA18 C000FC5C C01609B4 C0160C54

ng

Kernel panic: Aiee, killing interrupt handler!

In interrupt handler - not synci

Nach einem Reset ist die Box ganz normal als on nichts ist gestartet und hat keine Mucken mehr gemacht.

Ich weiß da echt nicht mehr weiter! Ich werde Sie glaube ich mal komplett Zerlegen und schauen ob ich was finde. Das kann ich aber erst am wochenende machen.

waddi · 22. August 2007

meine hab ich zur Reparatur gegeben, selbe Sympthome, vermute Tuner kaputt, zum Schluss war bei der kabelbox nur noch Satellitensuche möglich :-(

marvbh · 22. August 2007

Hi,

also meinst du er tuner ist defekt?

Ich könnte mir mal einen neuen bestellen und es testen oder?

Was hast du denn für die Reperatur bezahlt, und wo hast du es machen lassen?

waddi · 22. August 2007

Gerade weggeschickt, am Freitag weiss ich mehr.

marvbh · 23. August 2007

Hallo,

ich hab mal wieder nen Bootlog gemacht. Leider hat die Box nach dem 2ten mal gestartet.

Aber ein etwas stürtzt ab und startet neu.

##### Image-Version: Keywelt_Sep2006_V2_hdd_beta7 #####

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Sagem

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v001A

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_av_core: Starting avia_gt_wdt thread.

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

insmod: Warning: kernel-module version mismatch

/var/modules/at76c651.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.32-dbox2

DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos

Exp $

avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension

options:

(demux reinit) enx_reset=1

(framer chan.) fc_reset=1

(clr avia reg) avia=0

(enx td trace) trace=1

(lock, unlock) spinlock=0

Schreiben ueber /proc/bus/gtx

(delay) delay=500

Thu Jan 1 01:00:00 CET 1970

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.227 2006/06/

08 20:19:32 houdini Exp $

[sectionsd] Caching max 3000 events

[sectionsd] Caching 14 days

[sectionsd] Events are old 60min after their end time

[timeThread] Time set via NTP, going to sleep for 1800 seconds.

/var/plugins/operations logcs_init

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

/tmp/currentservices.xml: No such file or directory

/var/plugins/operations camd_start

$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)

[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1

[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

starte scam

[yhttpd] Webserver starting...

/var/plugins/operations epg_reinit

starte bsdice_watchdog

dbox2 watchdog v0.84 by bsdice

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] registering as event client

[neutrino] initialized everything

PES, queue 0 normal.

DMXDEV COMPAT: DMX_SET_FILTER pid 1

DMXDEV COMPAT: DMX_SET_FILTER pid 20a

[CBasicClient] connect failed: /tmp/camd.sock01

/tmp/camd.sock01: No such file oDMXDEV COMPAT: DMX_STOP

DMXDEV COMPAT: DMX_SET_FILTER pid 1

r directory

[CBasicClient] connect failed: /tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)

DMXDEV COMPAT: DMX_SET_FILTER pid 20a

avia_gt_wdt_thread: FIFO_PDCT = 127 ==> risc crashed .. restarting

DMXDEV COMPAT: DMX_SET_FILTER pid 20a

[LCDFONT] FTC_Face_Requester (Fix12/Regular)

PES, queue 0 normal.

DMXDEV COMPAT: DMX_STOP

DMXDEV COMPAT: DMX_SET_FILTER pid 21e

[CBasicClient] connect failed: /tmp/camd.sock01

DMXDEV COMPAT: DMX_SET_FILTER pid 21e

/tmp/camd.sock01: No such file or directory

[CBasicClient] connect failed: /tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

DMXDEV COMPAT: DMX_SET_FILTER pid 21e

avia_gt_wdt_thread: FIFO_PDCT = 127 ==> risc crashed .. restarting

DMXDEV COMPAT: DMX_SET_FILTER pid 21e

avia_gt_wdt_thread: FIFO_PDCT = 127 ==> risc crashed .. restarting

DMXDEV COMPAT: DMX_SET_FILTER pid 21e

waddi · 23. August 2007

nsmod: Warning: kernel-module version mismatch

/var/modules/at76c651.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.32-dbox2

hmmmm

marvbh · 24. August 2007

Hi,

mmmmhhhhhh???

Was hab ich jetzt wieder falsch gemacht?

das objeckt passt nicht zum Kernel? Das kommt aber so aus dem KW-Image. Und es läuft ja (wenn die Box sich aufgewärmt hat)

merkwuerden · 24. August 2007

nsmod: Warning: kernel-module version mismatch
/var/modules/at76c651.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.32-dbox2

Die Meldung ist normal, wenn der neue Tunertreiber über die rcS mit der Option -f geladen wird, ist nur ein Hinweis, daß das Modul eigentlich nicht zum Kernel paßt. Läßt man Option -f in der rcS weg, würde der Treiber erst gar nicht geladen...

@marvbh

Mir sieht das eher nach einem Hardware-Problem aus:

avia_gt_wdt_thread: FIFO_PDCT = 127 ==> risc crashed .. restarting

Eventuell hat der Avia-Chip ein Problem. Frage mal bei Ralf-Jürgen unter Vorlage des Bootlogs und Hinweis auf diesen Thread an, er wird Dir da sicherlich Genaueres sagen können.

marvbh · 24. August 2007

Hi leute,

erstmal danke für den Link mit der reparatur. Der Herr Bader konnte mir aber auch nicht wirklich helfen er meinte er kann so nicht sagen er müsste die Box vor ort haben und Prüfen.

Ich hatte mir vorsorglich mal einen neuen tuner bestellt Der kommt nächte woche. Ich werde zusätlich mal schauen ob ich eine kalte lötstelle am Netzteil oder sonst wo finde.

Hier jetzt einmal der Bootlog mit dem Startfehler.

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.2 mID 03

debug: feID 00 enxID 03

debug: fpID 52 dsID 01-1d.bb.78.07.00.00-dd

debug: HWrev 61 FPrev 0.23

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162920

verify sig: 262

Branching to 0x40000

U-Boot 1.2.0 (Tuxbox) (Jul 26 2007 - 19:52:45)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Sagem, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ..... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 696870 bytes loaded to 0x100000

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 696806 Bytes = 680.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.32-dbox2 (stachi@linux) (gcc version 3.4.4) #1 Do Jul 26 18:24

:52 CEST 2007

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30740k available (1184k kernel code, 384k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3a:6b:7f

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank

Intel/Sharp Extended Query Table at 0x0031

Using buffer write method

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00540000 : "root (squashfs)"

0x00540000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "FLFS (U-BOOT)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.2.1 (2007.08.05-21:58+0000) multi-call

##### Image-Version: Keywelt_Sep2006_V2_hdd_beta7 #####

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Sagem

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v001A

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_av_core: Starting avia_gt_wdt thread.

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

insmod: Warning: kernel-module version mismatch

/var/modules/at76c651.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.32-dbox2

DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos

Exp $

avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension

options:

(demux reinit) enx_reset=1

(framer chan.) fc_reset=1

(clr avia reg) avia=0

(enx td trace) trace=1

(lock, unlock) spinlock=0

Schreiben ueber /proc/bus/gtx

(delay) delay=500

Thu Jan 1 01:00:00 CET 1970

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.227 2006/06/

08 20:19:32 houdini Exp $

[sectionsd] Caching max 3000 events

[sectionsd] Caching 14 days

[sectionsd] Events are old 60min after their end time

[timeThread] Time set via NTP, going to sleep for 1800 seconds.

/var/plugins/operations logcs_init

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

/tmp/currentservices.xml: No such file or directory

/var/plugins/operations camd_start

$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)

[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1

[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

starte scam

[yhttpd] Webserver starting...

/var/plugins/operations epg_reinit

starte bsdice_watchdog

dbox2 watchdog v0.84 by bsdice

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] registering as event client

[neutrino] initialized everything

PES, queue 0 normal.

DMXDEV COMPAT: DMX_SET_FILTER pid 1

[CBasicClient] connect failed: /tmp/camd.sock01

/tmp/camd.sock01: No such file or directory

[CBasicClient] connect failed: /DMXDEV COMPAT: DMX_STOP

DMXDEV COMPAT: DMX_SET_FILTER pid 1

tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)