Hallenberg IF in Nokia 2xI Avia 600

Mad Alex · 4. August 2007

Hallo ! ich habe eine oben besagte Dbox 2

wenn ich das log richtig deute wird das if nicht erkant - keine ahnung was das ist

anbei der log

ich hoffe da kann mir einer was zu sagen ...

alles was ich bei tuxbox-wiki gelesen habe - hülsen -reinigen ect habe ich gemacht

Hat einer nen tip ???

U-Boot 1.1.4 (Tuxbox) (Aug 31 2006 - 20:09:02)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Nokia, BMon V1.2

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 696900 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 696836 Bytes = 680.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09:

34 CEST 2006

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 251625000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)

Console: colour dummy device 80x25

Calibrating delay loop... 66.76 BogoMIPS

Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:34:64

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00540000 : "root (squashfs)"

0x00540000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "FLFS (U-Boot)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.2.1 (2007.03.17-18:13+0000) multi-call

##### Image-Version: Keywelt_Sep.2006_V2_hdd_beta6 #####

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $

ide: late registration of driver.

dboxide: activating cs2

dboxide: address space of DBox2 IDE CPLD is at: 0xc389d000

dboxide: fifo did not store first test pattern

dboxide: not a valid dbox2 IDE CPLD detected

mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f

ile or directory

hdparm: /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory

warte auf init_ide

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Nokia

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

DVB: registering frontend 0:0 (VES1893)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos

Exp $

avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension

options:

(demux reinit) enx_reset=1

(framer chan.) fc_reset=1

(clr avia reg) avia=0

(enx td trace) trace=1

(lock, unlock) spinlock=0

Schreiben ueber /proc/bus/gtx

(delay) delay=500

Thu Jan 1 01:00:00 CET 1970

Starting the automounter

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.227 2006/06/

08 20:19:32 houdini Exp $

[sectionsd] Caching max 3000 events

[sectionsd] Caching 14 days

[sectionsd] Events are old 60min after their end time

/var/plugins/operations logcs_init

/var/plugins/operations camd_init

$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

/var/plugins/operations cardserver_start

/var/plugins/operations camd_start

DBox2 Multicam Driver v1.01 skars & doz21

starte camd3

/var/plugins/operations check_camd3_socket

01.01.1970 01:00:13 camd3: BOXTYPE: 1

01.01.1970 01:00:13 camd3: LOG: 6

01.01.1970 01:00:13 camd3: UDP_PORT: 20248

01.01.1970 01:00:13 camd3: original slot au on

01.01.1970 01:00:13 camd3: HTTP_PORT: 9080

01.01.1970 01:00:13 camd3: LOG_HOST: 127.0.0.1:514

01.01.1970 01:00:14 camd3: DNS_CACHE: 600 sec

01.01.1970 01:00:14 camd3: SOCKET: /tmp/camd.sock01

01.01.1970 01:00:14 camd3: KEYS: /var/keys/camd3.keys

01.01.1970 01:00:14 camd3: SERVERS: /var/keys/camd3.servers

01.01.1970 01:00:14 camd3: USERS: /var/keys/camd3.users

01.01.1970 01:00:14 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere

...

01.01.1970 01:00:15 camd3: Slot /dev/tts/1: starte Monitor...

01.01.1970 01:00:15 camd3: Slot /dev/tts/1: bereit

01.01.1970 01:00:15 camd3: original slot: CAID=1702

01.01.1970 01:00:16 camd3: KeyDB: gestartet

01.01.1970 01:00:16 camd3: camd v3.868 - erfolgreich gestartet

01.01.1970 01:00:16 camd3: HTTP: started on port 9080

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

/tmp/currentservices.xml: No such file or directory

$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[yhttpd] Webserver nhttpd/3.1.2 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[sectionsd] getUTC: read: Connection timed out

[basicsocket] send_data: Resource temporarily unavailable

[yhttpd] Webserver starting...

/var/plugins/operations epg_reinit

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] received 33 sats

[neutrino] registering as event client

[basicsocket] send_data: Resource temporarily unavailable

[neutrino] initialized everything

SnowHead · 4. August 2007

@Mad Alex

Wenn das Reinigen der Kontakte des Memory-Slots nichts gebracht hat,

ist das Interface defekt und muß ausgetauscht oder repariert werden.

Mad Alex · 4. August 2007

Ja ok das is ma ne aussage -

habe mit kontakt LR gereinigt -

ok werde mich dan mal umersatz kümmern

Vielen dank

Anmelden

Hallenberg IF in Nokia 2xI Avia 600

Empfohlene Beiträge

Mad Alex

Link zu diesem Kommentar

Auf anderen Seiten teilen

SnowHead

Link zu diesem Kommentar

Auf anderen Seiten teilen

Mad Alex

Link zu diesem Kommentar

Auf anderen Seiten teilen

Archiviert

Wer ist Online 0 Benutzer

Keywelt-Board

Aktivitäten