franknfurter Geschrieben 16. Mai 2007 Melden Share Geschrieben 16. Mai 2007 Hier der log vom Hallenberg, ich hoffe die Profis hier können damit was anfangen: Nach Abruch steht im Display: Fehler beim Löschen. ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.42.110, My IP 192.168.42.202 debug: Sending TFTP-request for file F/dboxifa_tmp/tftpboot/u-boot will verify ELF image, start= 0x800000, size= 140592 verify sig: 263 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.1.2 (Tuxbox) (Mar 28 2005 - 13:54:32) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.42.110; our IP address is 192.168.42.202 Filename 'F/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.42.110; our IP address is 192.168.42.202 Filename '/tftpboot/logo-lcd'. Load address: 0x100000 Loading: *## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.42.110; our IP address is 192.168.42.202 Filename 'F/dboxifa_tmp/tftpboot/u-boot'. Load address: 0x100000 Loading: *Using SCC ETHERNET device TFTP from server 192.168.42.110; our IP address is 192.168.42.202 Filename '/tftpboot/logo-fb'. Load address: 0x100000 Loading: *#################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 (RO) 10040000 (RO) 10060000 (RO) 10080000 (RO) 100A0000 (RO) 100C0000 (RO) 100E0000 (RO) 10100000 (RO) 10120000 (RO) 10140000 (RO) 10160000 (RO) 10180000 (RO) 101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO) 10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO) 102A0000 (RO) 102C0000 (RO) 102E0000 (RO) 10300000 (RO) 10320000 (RO) 10340000 (RO) 10360000 (RO) 10380000 (RO) 103A0000 (RO) 103C0000 (RO) 103E0000 (RO) 10400000 (RO) 10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO) 104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO) 10520000 (RO) 10540000 (RO) 10560000 (RO) 10580000 (RO) 105A0000 (RO) 105C0000 (RO) 105E0000 (RO) 10600000 (RO) 10620000 (RO) 10640000 (RO) 10660000 (RO) 10680000 (RO) 106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO) 10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO) 107A0000 (RO) 107C0000 (RO) 107E0000 (RO) Bank # 2: missing or unknown FLASH type Using SCC ETHERNET device TFTP from server 192.168.42.110; our IP address is 192.168.42.202 Filename 'kernel-yadd'. Load address: 0x100000 Loading: *################################################################# ################################################################# #################### done Bytes transferred = 763552 (ba6a0 hex) ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 763488 Bytes = 745.6 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK dbox2 - ImageFlashingAssistent - Hallenberg.com - Wilkommen auf ihrer dbox2 Der Flashprozess wird nun gestartet... While erasing blocks 0x00000000-0x00020000 on /dev/mtd/4: Input/output error Flashen beendet! Sie koennen die dbox jetzt ausschalten. Please press Enter to activate this console. ^A^A ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Realtek RTL8169/8110 Family Gigabit Ethernet NIC (0) IP-Adresse des Netzwerkadapters: 192.168.42.110 IP-Adresse die die dbox bekommt: 192.168.42.202 Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) DBOX-IFA Version: 1.8 Dateiname des Images: glj_neutrino_270407_kabel_light_1x.img Imagetyp: Ein Flash ------ Powered by http://www.dboxservice-hallenberg.de ------ Serielles Kabel hab ich dran, ist ne Nokia 2xI Kabel, hab das schon oft gemacht denke nun dass Box einen Weg hat. Hier noch eien Bootlog vom Bootmanager: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-3d.b1.05.07.00.00-e3 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /root/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /root/platform/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /root.new/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /root.new/platform/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed Flash-FS bootstrap loader (v1.5) ERROR: in bootrecord: magic=0 version=0.0 blockcount 0!=126 blocksize 0!=65536 Flash superblock not ok: No or wrong bootrecord boot flash /lost+found/root/platform/kernel/os failed dbox2:root> Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 16. Mai 2007 Admin Melden Share Geschrieben 16. Mai 2007 @franknfurter Der Flash-Assi konnte aufgrund von Hardwareproblemen den Flash nicht vollständig löschen und der Bootmanager hat wegen "boot net failed" versucht, aus diesem teilgelöschten Flash zu booten. Wenn eine Wieder- holung mit dem Flash-Assi immer wieder den Fehler beim Löschen bringt, fixe das "boot net failed"-Problem wie in den FAQ beschrieben (manuelle Eingabe von "boot net") und flashe mit dem Bootmanager. Dessen Logs sind im Bezug auf die Fehlerursache aussagekräftiger. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
franknfurter Geschrieben 16. Mai 2007 Autor Melden Share Geschrieben 16. Mai 2007 Vielen Dank SnowHead, ich werd morgen probieren, hoffe dass der Bootloader nicht defekt ist????? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
franknfurter Geschrieben 17. Mai 2007 Autor Melden Share Geschrieben 17. Mai 2007 So sieht das jetzt mit Bootmanager aus, der flash lässt sich wohl nicht löschen?? Noch ein Tipp für mich?? debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-3d.b1.05.07.00.00-e3 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.42.110, My IP 192.168.42.115 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash will verify ELF image, start= 0x800000, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-13-fe-51 FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.42.110; our IP address is 192.168.42.115 Filename 'C/Programme/tftpboot/logo-lcd'. Load address: 0x130000 Loading: ## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.42.110; our IP address is 192.168.42.115 Filename 'C/Programme/tftpboot/logo-fb'. Load address: 0x120000 Loading: ######### done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 dbox2-ppcboot> bootp 120000 /C/DBOX1/GLJ2xiKabel2704/glj_neutrino_270407_kabel_2 x.img BOOTP broadcast 1 TFTP from server 192.168.42.110; our IP address is 192.168.42.115 Filename '/C/DBOX1/GLJ2xiKabel2704/glj_neutrino_270407_kabel_2x.img'. Load address: 0x120000 Loading: ####################################################################### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ###################### done dbox2-ppcboot> protect off 10020000 107fffff ............................................................... Un-Protected 63 sectors dbox2-ppcboot> erase 10020000 107fffff Erase Flash from 0x10020000 to 0x107fffff sector 66 ...erase failed: a800a8 done Erased 63 sectors dbox2-ppcboot> cp.l 120000 10020000 1F8000 Copy to Flash... Flash not Erased dbox2-ppcboot> Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Admin SnowHead Geschrieben 17. Mai 2007 Admin Melden Share Geschrieben 17. Mai 2007 @franknfurter "erase failed: a800a8" bedeutet zu niedrige oder fehlende Programmier- spannung. Ist also ein Hardwareproblem. Laß Dir von Ralf-Jürgen unter Angaben des Logs einen Kostenvoranschlag für eine Reparatur machen. Und überschreib mal die dsID in Deinem Log. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
franknfurter Geschrieben 18. Mai 2007 Autor Melden Share Geschrieben 18. Mai 2007 Dank Dir für Deine Auskunft Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.