@IDE Support:
Habe mir heute endlich entsprechende Kabel gekauft, hierkommt mein Bootlog. Hoffe das hilft weiter. Also HDD geht, SD Karte lief, aber jetzt nicht mehr.
Gruß
Quacks
----------------------------------
Ready to shutdown system...
The system is going down NOW!
Sending SIGTERM to all processes
[yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes
Requesting system reboot
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-38.37.80.07.00.00-07
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 162992
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Apr 21 2008 - 03:19:14)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670142 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670078 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.2-dbox2 (image@Server) (gcc version 3.4.6) #32 Fr Apr 25 04
:23:39 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:45
:0c:72
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-04-25 04:28:46 CEST)
##### Image-Version: Keywelt_Apr2008_V1.1 #####
Mon Apr 21 03:40:00 UTC 2008
Journalled Block Device driver loaded
$Id: mmccombo.c,v 1.2 2007/05/21 08:37:28 satsuse Exp $
mmc: User asked for autodetection, I'll try ...
mmc: Hardware cleanup - nothing to clean
mmc: Hardware init for wiringopt = 4 - OK
mmc: Hardware cleanup - done
mmc: Hardware init for wiringopt = 1 - OK
mmc: Hardware cleanup - done
mmc: Hardware init for wiringopt = 2 - failed! A:0 B:0
mmc: autodetection failed. Quit
Oops: kernel access of bad area, sig: 11
NIP: C000D948 XER: 00000000 LR: C000D93C SP: C1C1DCF0 REGS: c1c1dc40 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: C2000000
TASK = c1c1c000[48] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00001032 C1C1DCF0 C1C1C000 00000001 00009032 00000001 FFFFCCC4 C0144C57
GPR08: 00000000 C1C1DD28 00000040 00000000 28004022 1008102C 10060000 00000001
GPR16: 10080000 1007CEB1 1008278C 10082700 00009032 C1C1DEA0 C1BBD000 1008F680
GPR24: C1C1DDD0 00000008 C1C1DD20 C3890000 C0165374 C1C1DD20 C0165360 C0165370
Call backtrace:
C0140000 C00075F8 C0060D30 C005B150 C38940EC C38944AC C0011108
C000285C 1002EEA0 10003D14 10003D4C 10003F0C 0FEB244C 00000000
Segmentation fault
mmccombo 13928 1 (initializing)
rmmod: /lib/modules/2: No such file or directory
insmod: a module named mmccombo already exists
mmccombo 13928 1 (initializing)
rmmod: /lib/modules/2: No such file or directory
insmod: a module named mmccombo already exists
mmccombo 13928 1 (initializing)
rmmod: /lib/modules/2: No such file or directory
insmod: a module named mmccombo already exists
mmccombo 13928 1 (initializing)
rmmod: /lib/modules/2: No such file or directory
insmod: a module named mmccombo already exists
mmccombo 13928 1 (initializing)
rmmod: /lib/modules/2: No such file or directory
insmod: a module named mmccombo already exists
## sdmmc Treiber /lib/modules/2.4.36.2-dbox2/misc/mmccombo.o wiringopt=0 opt=0 f
orcehw=0 fehlerhaft ##
Start 'start_mmccombo' fehlgeschlagen!
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38b6000
Probing IDE interface ide0...
hda: SAMSUNG MP0804H, ATA DISK drive
Unhandled interrupt 2f, disabled
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=9733/255/63
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
Adding Swap: 104380k swap-space (priority -1)
warte auf 'init_ide'
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/ide/host0/bus0/target0/lun0/disc:
setting acoustic management to 254
setting drive write-caching to 0 (off)
setting standby to 72 (6 minutes)
write-caching = 1 (on)
acoustic = 254 (128=quiet ... 254=fast)
'init_ide' fertig
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Nokia
Model: D-BOX2
insmod: preferring module /var/lib/modules/dvb-core.o
insmod: warning: kernel-module version mismatch
/var/lib/modules/dvb-core.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.36.2-dbox2
[i2c-8xx]: mpc 8xx i2c init
i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/dbox2_fp_input.o was compiled for kerne
l version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
i2c-core.o: driver DBox2-CAM registered.
i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C adapt
er](pos. 4).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/avia_av.o was compiled for kernel versi
on 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.2-dbox2/misc/ves1820.v12.o was compiled for kernel v
ersion 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
DVB: VES1820(0): pwm=0x47 (user specified)
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.260 2008/03/
24 19:14:50 dbt Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[eitThread] pid 304 start
[timeThread] Time set via NTP, going to sleep for 1800 seconds.
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/var/plugins/operations camd_start
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
DBox2 Multicam Driver v1.01 skars & doz21
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...starte scam
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] registering as event client
[neutrino] initialized everything
SPTS, queue 0 extended.
avia_gt_core: masking unhandled irq reg 1 bit 15
DMXDEV COMPAT: DMX_SET_FILTER pid 1
[CBasicClient] connect failed: /tmp/camd.sock01
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
/tmp/camd.sock02: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
DMXDEV COMPAT: DMX_STOP
DMXDEV COMPAT: DMX_SET_FILTER pid 1
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
19:43:56.669 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f
ilter 0x60 mask 0xf0
19:44:00.698 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f
ilter 0x60 mask 0xf0