Keine Kanäle gefunden

[scorpy_63]

Hallo!

 

Habe eine DBox Nokia 2xi Avia500 in den Debug Modus gebracht und Juni V4 Image geflasht.

 

Die Box ist über Web Interface erreichbar, startet auch IMHO ganz normal.

 

Ist der Tuner hin?

 

Wo kann man das im Bootlog sehen? Oder hab' ich da ein ganz anderes Problem?

 

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0  mID 01

debug: feID 7a    gtxID 0b

debug: fpID 5a    dsID xxxxxxxxxxxxxx

debug: HWrev X5  SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032

 

will verify ELF image, start= 0x800000, size= 155204

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.1.4 (Tuxbox) (Jul 13 2006 - 00:45:35)

 

CPU:  PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

        *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

      Watchdog enabled

I2C:  ready

DRAM:  32 MB

FLASH:  8 MB

Scanning JFFS2 FS: .... done.

FB:    ready

LCD:  ready

In:    serial

Out:  serial

Err:  serial

Net:  SCC ETHERNET

 

Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 696893 bytes loaded to 0x100000

...............................................................

Un-Protected 63 sectors

## Booting image at 00100000 ...

  Image Name:  dbox2

  Image Type:  PowerPC Linux Kernel Image (gzip compressed)

  Data Size:    696829 Bytes = 680.5 kB

  Load Address: 00000000

  Entry Point:  00000000

  Verifying Checksum ... OK

  Uncompressing Kernel Image ... OK

Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Jul 13 00:46:

06 CEST 2006

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:16:32:12

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00540000 : "root (squashfs)"

0x00540000-0x007e0000 : "var (jffs2)"

0x007e0000-0x00800000 : "FLFS (U-Boot)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started:  BusyBox v1.1.3 (2006.07.12-22:50+0000) multi-call mount: Mounting

/dev/mtdblock/2 on /var failed: No such file or directory

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

  Vendor: Nokia

  Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

DVB: VES1820(0): pwm=0x48

DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos

Exp $

avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension

options:

(demux reinit)  enx_reset=1

(framer chan.)  fc_reset=1

(clr avia reg)  avia=0

(enx td trace)  trace=1

(lock, unlock)  spinlock=0

Schreiben ueber /proc/bus/gtx

(delay)        delay=500

cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

 

Starting the automounter

 

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970

$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $

[sectionsd] Caching max 6000 events

[sectionsd] Caching 14 days

[sectionsd] Events are old 60min after their end time

/var/plugins/operations logcs_init

/var/plugins/operations camd_init

$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

/var/plugins/operations cardservavia_gt_core: masking unhandled irq reg 0 bit 7

er_start

[getservices] /var/tuxbox/config/zapit/myservices.xml  found.

/tmp/currentservices.xml: No such file or directory

$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

 

[controld] Boxtype detected: (1, Nokia D-BOX2)

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[nhttpd] Neutrino HTTP-Server starting..

[LCDFONT] initializing core.../var/plugins/operations epg_reinit

/var/plugins/operations camd_start

 

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

insmod: Warning: kernel-module version mismatch

        /var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2

        while this kernel is version 2.4.32-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starte camd3

/var/plugins/operations check_camd3_socket

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

01.01.1970 01:00:12 camd3: BOXTYPE:  1

01.01.1970 01:00:12 camd3: LOG:  6

01.01.1970 01:00:12 camd3: UDP_PORT:  20248

01.01.1970 01:00:13 camd3: original slot au on

01.01.1970 01:00:13 camd3: HTTP_PORT:  9080

01.01.1970 01:00:13 camd3: LOG_HOST:  127.0.0.1:514

01.01.1970 01:00:13 camd3: DNS_CACHE:  600 sec

01.01.1970 01:00:13 camd3: SOCKET:  /tmp/camd.sock01

01.01.1970 01:00:13 camd3: KEYS:    /var/keys/camd3.keys

01.01.1970 01:00:13 camd3: SERVERS:  /var/keys/camd3.servers

01.01.1970 01:00:13 camd3: USERS:  /var/keys/camd3.users

01.01.1970 01:00:13 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere

...

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

01.01.1970 01:00:14 camd3: Slot /dev/tts/1: starte Monitor...

01.01.1970 01:00:14 camd3: Slot /dev/tts/1: bereit

01.01.1970 01:00:14 camd3: original slot: CAID=1722

 

01.01.1970 01:00:15 camd3: KeyDB: gestartet

01.01.1970 01:00:15 camd3: HTTP: started on port 9080

01.01.1970 01:00:15 camd3: camd v3.868 - erfolgreich gestartet

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] registering as event client

[sectionsd] getUTC: read: Connection timed out

^[[b^[[b^[[b[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[sectionsd] getUTC: read: Connection timed out

[Gast magix]

Spiel doch mal Setting manuell ein ,dann siehst du doch was los ist !

[scorpy_63]

Natürlich...

 

Auf's Einfachste kommt man immer zuletzt.

 

Werd's mal ausprobieren.

 

Danke und Gruß