Nokia defekt ?

[vierzig]

Hallo

Habe eine Nokia Sat Avia 500 2x intel, beim Booten steht sie immer bei loading kernel. Das flaschen eines Image geht ohne Probleme. Im Bootlog steht sie immer Hier:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a **************

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x7ffd, size= 160940

verify sig: 263

Branching to 0x3fff

 

 

U-Boot 1.1.2 (Tuxbox) (Oct 3 2005 - 17:44:01)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 62533.....................................................

..........

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 62526642.6 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.31-dbox2 (image@suse) (gcc version 3.3.5) #2 Mo Okt 3 18:23:31

CEST 2005

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs

Decrementer Frequency = 2467571<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP:

0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 29590k available (1124k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

Squashfs 2.1-r2 (released 2004/12/15) © 2002-2004 Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:46:83

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00540000 : "root (squashfs)"

0x0053fffg-0x007e0000 : "var (jffs2)"

0x007dff8-0x00800000 : "flfs (u-boot)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

 

Mfg vierzig

[SnowHead]

@vierzig

 

Hardwareseitig kommen keine Fehlermeldungen. Flashe mal ein anderes Image.

[grave_digga]

Kann es sein daß Du beim booten noch das Nullmodemkabel an der Box stecken hast? Oder interpretiere ich das da falsch:

 

In: serial

Out: serial

Err: serial

 

Kenn mich in der Materie auch noch nicht so gut aus, also falls es falsch ist, nicht hauen

[SnowHead]

@grave_digga

 

Wirst nicht gehauen. Aber ohne Nullmodem hätte er das Log gar nicht

bekommen. Da die Daten aber vom Bootmanager abgenommen wer-

den, bleibt die nicht Box wegen des Kabels hängen. Ich tippe eher auf

ein verkorkstes Image.

[vierzig]

Hallo

Danke für die Antworten habe nun ein neues Image ,aber es geht auch nicht. Auf dem Startlogo sind lauter Pixelfehler.

 

Hier nochmal das Bootlog:debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a ************

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0032

 

will verify ELF image, start= 0x7ffd, size= 155528

verify sig: 263

Branching to 0x3fff

 

 

U-Boot 1.1.2 (Tuxbox) (Jul 9 2005 - 04:34:09)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: ....... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load complete: 640.......................................................

........

Un-Protected 63 sectors

## Booting image at 000fffew ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 640z90 Bytes = 628.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.31-dbox2 (dietmarw@linux) (gcc version 3.3.5) #1 Sa Jul 9 04:3

7:21 CEST 2005

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock2 rw

Decrementer Frequency = 23856C1a/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30840k available (1096k kernel code, 372k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

Squashfs 2.1-r2 (released 2004/12/15) © 2002-2004 Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:46:83

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 5 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x0001fffg-0x00040000 : "FLFS (U-Boot)"

0x0003fffg-0x00800000 : "root (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

cramfs: wrong magic

VFS: Mounted root (jffs2 filesystem).

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

Oops: kernel access of bad area, sig: 11

NIP: C006477C XER: 00000000 LR: C00646D0 SP: C1FFDBC0 REGS: c1ffdb10 TRAP: 0300

Not tainted

MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11

DAR: 00000004, DSISR: BFFF800

TASK = c1ffc000[1] 'init' Last syscall: 5

last math 00000000 last altivec 00000000

GPR00: 00000000 C1FFDBC0 C1FFBCW C1EF64W C1F00DA0 0000000C 00000007 00000007

GPR08: 00000020 C1EF6DE0 00000001 00000000 001E2DA 00000000 10001D28 00000000

GPR16: 7FFFF268 30023AD0 7FFFF165 00000000 00009032 01FFDF10 00000000 C00027C8

GPR24: 0000007E C1F648E4 00000000 C1EAA1A0 C1FFDBD8 C1EF67F0 C1F542D0 C1F648E4

Call backtrace:

C00646D0 C0064B24 C0064F54 C0064B98 C006592G C006517C C006CBC4

C00606FC BC03C\0 BE03D6G BE03DB\C BE03E0\C BA02l`4 BE030B4

C000257C 000047A8 2F805E1 2F80647 2E80Z84 2F00A2F8097C

30002FF4 2E80ffC 30001DD4 3000231C 2E80jG8

Kernel panic: Attempted to kill init!

<0>Rebooting in 180 seconds..

Mfg vierzig

[pinguin3]

hallo,

 

habe das gleiche Problem mit einer Nokia 2x Intel Avia 500 Bmon 1.0,

nach dem flashen hat das image kurz funktioniert ca. 5min. danach neustart--

 

grüner Hintergrund und pixelfehler!!!!!

 

gibts einen hinweis, welcher Bauteil gegangen ist???????

 

bitte um antwort