box fährt nicht mehr ganz hoch

[Gast Fearactor]

...weiss einer was das heißt ?

hab noch kein neues image geflasht, weil das mit dem bootmanager immer so nen ding is

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.0  mID 02

debug: feID 00    enxID 03

debug: fpID 52    dsID

debug: HWrev 01  FPrev 0.30

debug: B/Ex/Fl(MB) 32/00/08

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/philips-dbox2/kernel/os in Flash-FS

debug: Got Block #0040

 

will verify ELF image, start= 0x800000, size= 152952

verify sig: 263

Branching to 0x40000

 

 

U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

 

CPU:  PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Philips, BMon V1.0

      Watchdog enabled

I2C:  ready

DRAM:  32 MB

FLASH:  8 MB

Scanning JFFS2 FS: ....... done.

FB:    ready

LCD:  ready

In:    serial

Out:  serial

Err:  serial

Net:  SCC ETHERNET

 

Options:

  1: Console on null

  2: Console on ttyS0

  3: Console on framebuffer

Select option (1-3), other keys to stop autoboot:  0

...............................................................

Un-Protected 63 sectors

### FS (jffs2) loading 'vmlinuz' to 0x100000

### FS load complete: 602491 bytes loaded to 0x100000

## Booting image at 00100000 ...

  Image Name:  dbox2

  Image Type:  PowerPC Linux Kernel Image (gzip compressed)

  Data Size:    602427 Bytes = 588.3 kB

  Load Address: 00000000

  Entry Point:  00000000

  Verifying Checksum ... OK

  Uncompressing Kernel Image ... OK

Linux version 2.4.25-dbox2 (dietmarw@h5938) (gcc version 3.3.3) #1 Thu Jul 1 05:

23:03 CEST 2004

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rw console=ttyS0

Decrementer Frequency = 247125000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)

Warning: real time clock seems stuck!

Console: colour dummy device 80x25

Calibrating delay loop... 65.53 BogoMIPS

Memory: 30924k available (1020k kernel code, 364k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. © 2001-2003 Red Hat, Inc.

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2b:db:00

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Using word write method

Creating 5 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (u-boot)"

0x00040000-0x00800000 : "root (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

cramfs: wrong magic

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1bfc: 0x0185 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c04: 0x6567 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c18: 0x0001 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c1c: 0x40e3 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c20: 0x40e3 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c24: 0x40e3 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c34: 0x0600 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c38: 0xde80 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c3c: 0x400b in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c40: 0x785e in

stead

Further such events for this erase block will not be printed

VFS: Mounted root (jffs2 filesystem).

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

Starting pid 11, console /dev/console: '/etc/init.d/rcS') multi-c

Using /lib/modules/2.4.25-dbox2/misc/event.o

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Using /lib/modules/2.4.25-dbox2/misc/tuxbox.o

Using /lib/modules/2.4.25-dbox2/misc/multicam.o

DBox2 Multicam Driver v1.01 skars & doz21

Using /lib/modules/2.4.25-dbox2/misc/dvb-core.o

Using /lib/modules/2.4.25-dbox2/misc/dbox2_i2c.o

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp.o

Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_input.o

Using /lib/modules/2.4.25-dbox2/misc/avs.o

Using /lib/modules/2.4.25-dbox2/misc/saa7126.o

Detected STB:

  Vendor: Philips

  Model: D-BOX2

Using /lib/modules/2.4.25-dbox2/misc/cam.o

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

Using /lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o

Using /lib/modules/2.4.25-dbox2/misc/avia_napi.o

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

Using /lib/modules/2.4.25-dbox2/misc/cam_napi.o

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o

Using /lib/modules/2.4.25-dbox2/misc/avia_av.o

avia_av: $Id: avia_av_core.c,v 1.93 2004/06/26 16:12:43 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

Using /lib/modules/2.4.25-dbox2/misc/avia_gt.o

avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_fb.o

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

Using /lib/modules/2.4.25-dbox2/misc/lcd.o

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_lirc.o

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_oss.o

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_v4l2.o

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

Using /lib/modules/2.4.25-dbox2/misc/tda8044h.o

DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...

Using /lib/modules/2.4.25-dbox2/misc/avia_av_napi.o

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

Using /lib/modules/2.4.25-dbox2/misc/avia_gt_napi.o

avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $

Using /lib/modules/2.4.25-dbox2/kernel/net/sunrpc/sunrpc.o

error: disclaimer.txt not found

error: .subversion not found

error: .build not found

Using /lib/modules/2.4.25-dbox2/kernel/fs/lockd/lockd.o

Using /lib/modules/2.4.25-dbox2/kernel/fs/nfs/nfs.o

Using /lib/modules/2.4.25-dbox2/kernel/fs/cifs/cifs.o

Starting pid 92, console /dev/console: '/etc/init.d/start'

 

Please press Enter to activate this console. .$Id: sectionsd.cpp,v 1.176 2004/04

/29 09:11:13 metallica Exp $

caching 504 hours

events are old 180min after their end time

Couldn't open config file: /var/keys/newcamd-client.txt

(compiled Jul 28 2004 13:49:59)

styled by TBT Team, Version 22 (Standalone for dbox2-Dreambox)

[camd] ca system id: 1702

$Id: zapit.cpp,v 1.354 2004/06/10 19:56:12 rasc Exp $

 

Starting pid 93, console /dev/console: '/bin/sh'

 

 

BusyBox v1.00-pre8 (2004.05.11-12:26+0000) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

 

/ #

/ # [camd] no card is in slot #2

[camd] no card is in slot #1

$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

 

[controld] Boxtype detected: (2, Philips D-BOX2)

[nhttpd] Neutrino HTTP-Server starting..

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[deutsch.locale] superfluous entry: cam.wrong

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...[basicsocket] send_data: Resource temporarily unav

ailable

 

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...[basicsocket] send_data: Resourc

e temporarily unavailable

OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

Bad emulation neutrino/127

NIP: 0fc0221c instruction: 00000000 opcode: 0 A: 0 B: 0 C: 0 code: 0 rc: 0

pte @ 0x fc0221c:  (0xc1a320fc)->(0xc14e6008)->0x013f88a9

RPN: 013f8 PP: 2 SPS: 1 SH: 0 CI: 0 v: 1

Kernel VA for NIP 0xc13f821c  pte @ 0xc13f821c: no pmd

Floating point exception

zapit shot down

[CBasicClient] connect failed.

/tmp/zapit.sock: No such file or directory

Waiting for controld (max. 9 seconds)

Waiting for controld (max. 8 seconds)

Waiting for controld (max. 7 seconds)

 

/ # Waiting for controld (max. 6 seconds)

Waiting for controld (max. 5 seconds)

Waiting for controld (max. 4 seconds)

Waiting for controld (max. 3 seconds)

[sectionsd] getUTC: read: Connection timed out

Waiting for controld (max. 2 seconds)

Waiting for controld (max. 1 seconds)

Starting pid 177, console /dev/console: '/bin/switch'

STV6412 found

The system is going down NOW !!sighandler entered

[nhttpd] stop requested......

Sending SIGKILL to all processes.

The system is halted. Press Reset or turn off power

[Gast Fearactor]

nu gehts wieder, image war wohl zerschossen, kp warum

[derberg_de]

in deinem log steht boot net failed.das image hat wohl ein defekt gehabt, und die box konnte nicht booten.

[Worschter]

Hallo,

 

 

Sowas tritt bei mir bei so manch aktuellem Image auf.

Da gibt´s das Problem, daß irgendwie beim löschen von Dateien timeout Fehler

kommen. Bei manchem Images bereits beim ersten Ändern der Einstellungen.

Ab dann erhalt ich auch sowas

 

 

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1bfc: 0x0185 in

stead

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x002b1c04: 0x6567 in

stead

 

im Bootlog.

Ich denk mal, solange es bei Dir net öfter vorkommt ist´s Image einfach "überfüttert".

 

Bei mir tipp ich schon fast auf nen defekten Flash.

 

Gruß!

[SnowHead]

@derberg_de

 

"boot net failed" kommt beim normalen Booten immer. Die Box soll ja nicht vom

Netzwerk sondern aus dem Flash booten. Da der Bootloader aber immer zuerst

versucht, vom Netz zu booten aber keinen BootP-Server findet, kommt halt diese

Meldung.