snoety Geschrieben 22. Oktober 2016 Melden Share Geschrieben 22. Oktober 2016 (bearbeitet) Hi, hab meine Neo beim Updaten zerschossen. Jetzt fährt die nur noch bis ins Bootmenü hoch, im Display steht: 1.lade Treiber 2.bereite Neutrino Start vor dann kommt die text nachricht HALT und die Box fährt runter Anschließend kann ich die box über die Power Taste neu starten, jedoch passiert wieder das selber wie oben beschrieben. Ich wollte mit dem NXPHD Loader alles wieder von neuem Starten und die Box quasi wieder clean machen. Hab auch die Passenden Dateien auf nen USB stick gepackt und in die Neo vorne Reingesteckt. Nach dem Neustart kann ich dann auswählen ob ich den Kernel oder das File System upgraden möchte. Wenn ich das Filesystem auswähle gibt mir der Loader nach kurzer Zeit "unable to read "sysroot.img" from usb raus. Woran kann das wohl liegen? Oder muss ich vielleicht gar nicht mit dem Programm alles neu machen? Per FTP komme ich beim Bootvorgang noch auf die BOX bearbeitet 22. Oktober 2016 von snoety Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 22. Oktober 2016 Melden Share Geschrieben 22. Oktober 2016 Hi, versuche mal, so schnell wie möglich beim Booten per FTP die neutrino.conf zu löschen. Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
snoety Geschrieben 22. Oktober 2016 Autor Melden Share Geschrieben 22. Oktober 2016 Das hatte ich bereits als erstes gemacht.... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 22. Oktober 2016 Melden Share Geschrieben 22. Oktober 2016 Hi, evtl wird der Stick nicht richtig erkannt bzw unterstützt, die Coolie ist da manchmal sehr wählerisch. Probiere mal einen anderen (möglichst alt, möglichst klein)... Ciao, DdD. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
snoety Geschrieben 22. Oktober 2016 Autor Melden Share Geschrieben 22. Oktober 2016 Das ist ja gerade das komische.... Erkannt wird er ja. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Don de Deckelwech Geschrieben 22. Oktober 2016 Melden Share Geschrieben 22. Oktober 2016 (bearbeitet) Hi, woran erkennst du das? Poste doch mal das Log aus dem NXPHDloader... Ciao, DdD. edit: wie hast du die Dateien genannt, weil "sysroot.img" macht mich stutzig, das sollte doch mtd2.img sein... bearbeitet 22. Oktober 2016 von Don de Deckelwech Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
snoety Geschrieben 22. Oktober 2016 Autor Melden Share Geschrieben 22. Oktober 2016 Kann ich gleich mal machen. Aber ich erkenne das weil die zwei Buttons nicht mehr ausgegraut sind und ich das Update des Kernels bzw der Firmware auswählen kann. Dann macht der Loader irgendwas und später steht in der log File unable to read sysroot.img und so heißt die Datei auf dem Stick.... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
snoety Geschrieben 22. Oktober 2016 Autor Melden Share Geschrieben 22. Oktober 2016 (bearbeitet) Hi, hier mein Bootlog mit Putty =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.10.22 19:58:05 =~=~=~=~=~=~=~=~=~=~=~= [2h[61"p[m[44m[37m[1m[2J[1;1H[(B[)B[?3l[?9hÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º U-Boot 2009.03-svn1556 (Mai 27 2010 - 01:23:56) Coolstream HDx º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Chipset information º º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º º Option: 00010000 max. clock: 600 MHz Core voltage: high º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Clock information º º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º º CPU : 594.000 MHz from PLL1 º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Memory configuration º º Start ³ End ³ Type ³ Description º ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Serial number: 008-00001858 (08-000742) º º *** Warning - bad CRC, using default environment *** º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Network configuration º º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-07-42 º º PHY: IC Plus IP101 address: 09 º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Hit any key to stop autoboot: 1 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream Kernel (compressed) Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2323336 Bytes = 2.2 MB Load Address: 00048000 Entry Point: 00048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Linux version 2.6.34.13-nevis (image@LAPTOP2) (gcc version 4.7.1 (crosstool-NG 1.19.0) ) #1 Mon Jun 16 21:04:21 CEST 2014 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f CPU: VIPT aliasing data cache, VIPT aliasing instruction cache Machine: CoolStream HDx IRD Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Splash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 384968k/384968k available, 8248k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0x98800000 - 0xe0000000 (1144 MB) lowmem : 0x80000000 - 0x98000000 ( 384 MB) modules : 0x7e800000 - 0x80000000 ( 24 MB) .init : 0x80048000 - 0x80063000 ( 108 kB) .text : 0x80063000 - 0x80482000 (4220 kB) .data : 0x80482000 - 0x804a4de0 ( 140 kB) NR_IRQS:352 Console: colour dummy device 80x30 console [ttyRI0] enabled Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. NetWinder Floating Point Emulator V0.97 (double precision) Installing knfsd (copyright © 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. msgmni has been set to 751 io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded CX2450x MTD driver v1.0 (Jun 16 2014, 21:01:02) © Coolstream International Ltd. cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x000000000000-0x000000060000 : "U-Boot" 0x000000060000-0x000000080000 : "Splash" 0x000000080000-0x000000480000 : "kernel" 0x000000480000-0x000002000000 : "systemFS" arcvmac arcvmac: ARC VMAC at 0x80486580 irq 24 00:c5:5c:00:07:42 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver cx2450x-ehci cx2450x-ehci.0: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Trident CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected cx2450x-ehci cx2450x-ehci.1: Trident CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Trident CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.34.13-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver usbcore: registered new interface driver usbkbd usbkbd: :USB HID Boot Protocol keyboard driver usbcore: registered new interface driver usbmouse usbmouse: v1.6:USB HID Boot Protocol mouse driver ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 VFS: Mounted root (jffs2 filesystem) on device 31:3. Freeing init memory: 108K init started: BusyBox v1.22.1 (2014-10-28 14:13:28 CET) running /sbin/mknodes rootdir=/dev table=<stdin> makedevs: line 16: can't create node console: File exists done /sbin/mknodes starting /etc/init.d/S00loadmodules ... cs_frontpanel: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Frontpanel driver v0.12.0 (Jan 23 2014, 14:39:28) © Coolstream International Limited [1;33mFrontpanel: wakeup source ff time hi ff lo ff [0m Slow work thread pool: Starting up Slow work thread pool: Ready fuse init (API version 7.13) usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver ftdi_sio ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver CX2450x I2C-bus driver version 0.3b (Oct 8 2013, 14:34:47) © Coolstream International Limited Memory configured as 2 banks KAL over-allocation map ('x' = kernel, 'C' = cnxt): <6>------- 0 ------------- to ------------ 256 --------------- ooooooooooooooooCCooCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC <6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC <6>CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC <6>CCCCCCCxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx <6>------- 256 ------------- to ------------ 512 --------------- CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxxx <6>xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxoooooooooooo <6>................................................................ <6>................................................................ . = no RAM present C = Conexant KAL o = unutilized or Kernel RAM KAL: Starting the KAL... KAL Bank[0] cached @ V:0x81000000 == P:0x01000000, 2048 KB KAL Bank[0] uncached @ V:0x86800000 == P:0x06800000, 97280 KB KAL Bank[0] content @ V:0x81400000 == P:0x01400000, 86016 KB KAL Bank[1] cached @ V:0x00000000 == P:0x00000000, 0 KB KAL Bank[1] uncached @ V:0x92700000 == P:0x12700000, 20480 KB KAL Bank[1] content @ V:0x90000000 == P:0x10000000, 39936 KB KAL: Tiled physical region 0x01400000 to 0x06680000 (15) KAL: Tiled physical region 0x10000000 to 0x12580000 (15) KAL: Module loaded cnxt_base_drv: Initializing Edwards drivers... cnxt_base_drv: Done initializing Edwards drivers. cnxt_base_drv: Module loaded with major device 101 grep: /var/tuxbox/config/neutrino.conf: No such file or directory FB: cnxtfb_init_inst, plane OSD FB: mode 1280x720p-50 FB: HD Mode: 1280x720 FrameRate 5 SD Mode: 720x576 FrameRate 2 [logoview] done with Timeout... /proc/cnxt_trace_flags created # alsa_card_CX2450_init Success 8 , 116 cs_tsx_hsdp_set_port_speed: num: 594 denom: 7 cs_frontend version 0.6b DVB: registering new adapter (cs_frontend_dvb) stv090x_attach: Trying to attach STV090x demodulator(1) stv090x_attach: Attaching STV090x demodulator(1) stv6110_attach: Attaching STV6110 DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... cnxt_sata version 2.3cs scsi0 : cnxt_sata ata1: SATA max UDMA/133 irq 42 scsi1 : cnxt_sata ata2: SATA max UDMA/133 irq 35 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: SAMSUNG HM641JI, 2AJ10003, max UDMA/133 ata2.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HM641JI 2AJ1 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk starting /etc/init.d/S01mount ... starting /etc/init.d/S50hostname ... starting /etc/init.d/S51networking ... Configuring network interfaces... vmac_mii_bus: probed arcvmac arcvmac: PHY driver [Generic PHY] (mii_bus:phy_addr=0:09, irq=-1) EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended Starting wlan0 Failed to connect to wpa_supplicant - wpa_ctrl_open: Success Could not read interface wlan0 flags: No such device Failed to initialize driver interface PHY: 0:09 - Link is Down ip: SIOCGIFFLAGS: No such device Starting ifplugd... Sat Jan 1 00:00:00 CET 2000 done. starting /etc/init.d/S52syslogd ... Jan 1 00:00:00 coolstream syslog.info syslogd started: BusyBox v1.22.1 starting /etc/init.d/S60autofs ... starting the automounter... starting /etc/init.d/S90inetd ... starting /etc/init.d/S96nfsd ... starting /etc/init.d/S99samba ... starting /etc/init.d/S9A_rescue ... Jan 1 00:00:05 coolstream daemon.crit automount[591]: failed to mount autofs path /tmp/automount Jan 1 00:00:05 coolstream daemon.crit automount[591]: /tmp/automount: mount failed! Name server cannot be used, exiting 1 Jan 00:00:20 ntpdate[583]: name server cannot be used, reason: Temporary failure in name resolution Testmodus: Partition 3 oder Files wuerden jetzt geloescht werden starting /etc/init.d/S9L_logomask ... starting /etc/init.d/S9T_tuxcald ... starting /etc/init.d/S9T_tuxmaild ... Jan 1 00:00:30 coolstream user.info mdev-mount: drive has partitions sda1, not trying to mount sda Jan 1 00:00:31 coolstream user.info mdev-mount: /dev/sda1 already mounted - not mounting again Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start /var/plugins/operations camd_start /var/plugins/operations rezap [CBasicClient] connect failed. /tmp/zapit.sock: No such file or directory Segmentation fault /var/plugins/operations camd_stop /var/plugins/operations cardserver_stop Jan 1 00:00:32 coolstream daemon.info init: starting pid 716, tty '': '/etc/init.d/rcK' stoping /etc/init.d/K01samba ... stopping nmbd ...not running stopping smbd ...not running stoping /etc/init.d/K40autofs ... /etc/init.d/K40autofs: line 66: can't open /var/run/automount.pid: no such file stoping /etc/init.d/K48syslogd ... Jan 1 00:00:32 coolstream syslog.info syslogd exiting stoping /etc/init.d/K96nfsd ... cat: can't open '/tmp/unfsd.pid': No such file or directory sh: you need to specify whom to kill killall: portmap: no process killed killall: unfsd: no process killed killall: portmap: no process killed stoping /etc/init.d/K99mount ... umount: dev busy - remounted read-only Hard drive(s) found! Stopping... stopped /dev/sda Error trying to open /dev/sdb: No such device or address stopped /dev/sdb Error trying to open /dev/sdc: No such device or address stopped /dev/sdc Error trying to open /dev/sdd: No such device or address stopped /dev/sdd Error trying to open /dev/sde: No such device or address stopped /dev/sde Error trying to open /dev/sdf: No such device or address stopped /dev/sdf Error trying to open /dev/sdg: No such device or address stopped /dev/sdg Error trying to open /dev/sdh: No such device or address stopped /dev/sdh /bin/hdd_umount.sh: cd: line 2: can't cd to /media/ bin umount: can't umount /media/bin: No such file or directory dev umount: can't umount /media/dev: No such file or directory etc umount: can't umount /media/etc: No such file or directory lib umount: can't umount /media/lib: No such file or directory mnt umount: can't umount /media/mnt: No such file or directory proc umount: can't umount /media/proc: No such file or directory root umount: can't umount /media/root: No such file or directory sbin umount: can't umount /media/sbin: No such file or directory share umount: can't umount /media/share: No such file or directory sys umount: can't umount /media/sys: No such file or directory tmp umount: can't umount /media/tmp: No such file or directory usr umount: can't umount /media/usr: No such file or directory var umount: can't umount /media/var: No such file or directory The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system halt FP: Skip RC setup for FP version 0x21 sd 1:0:0:0: [sda] Synchronizing SCSI cache sd 1:0:0:0: [sda] Stopping disk System halted. bearbeitet 23. Oktober 2016 von Gandal Verwende Spoiler-Tag's für große Datenmengen! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
topie88 Geschrieben 23. Oktober 2016 Melden Share Geschrieben 23. Oktober 2016 Testmodus: Partition 3 oder Files wuerden jetzt geloescht werdenstarting /etc/init.d/S9L_logomask ... starting /etc/init.d/S9T_tuxcald ... starting /etc/init.d/S9T_tuxmaild ... Jan 1 00:00:30 coolstream user.info mdev-mount: drive has partitions sda1, not trying to mount sda Jan 1 00:00:31 coolstream user.info mdev-mount: /dev/sda1 already mounted - not mounting again Please press Enter to activate this console. /var/plugins/operations camd_init /var/plugins/operations cardserver_start /var/plugins/operations camd_start /var/plugins/operations rezap [CBasicClient] connect failed. /tmp/zapit.sock: No such file or directory Segmentation fault /var/plugins/operations camd_stop /var/plugins/operations cardserver_stop Es schmiert ab beim starten der Cam behaupte ich mal vorsichtig. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
snoety Geschrieben 23. Oktober 2016 Autor Melden Share Geschrieben 23. Oktober 2016 Vielen Dank für eure Hilfe... Aber ich hab es hin bekommen. Es lag tatsächlich am Stick , hatte mir heute noch ne Hand voll besorgt und dann konnte ich die Box neu flashen 1 Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge