Mikelweb Geschrieben 6. Mai 2012 Melden Share Geschrieben 6. Mai 2012 Hallo! Ich habe Probleme mit meiner HDD. Da meine Box vor einigen Monaten den Geist aufgegeben hat, hab ich mir eine mit HDD-Interface und HDD geholt. Leider funktioniert das alles nicht so wie es sollte. Das Image was drauf war hatte ich erstmal drauf gelassen, habe dann aber nach ein paar Aufnahmen Probleme bekommen. Abbrüche bei Aufnahmen und "Buffer" Meldungen beim abspielen. Ich habe dann das Image wieder auf mein vertrautes Keywelt 07/2011 gewechselt und die HDD-Einrichtung vorgenommen. Allerdings bricht er die Aufnahme alle paar Minuten ab (Zerstückelung). Die Box ist während dessen auch nicht zu bedienen. Ich habe dann nach einem Neustart einen HDD-Check laufen lassen. Während das Filesystem geprüft wurde ist die Box neu gestartet, danach bekam ich die Meldung "keine Festplatte gefunden". Ich habe ext2 als Filesystem gewählt und die Standardeinstellungen gelassen. Einen Log kann ich noch nachliefern, allerdings ist das schwieriger. Da muss ich erst die halbe Wohnung verkabeln... Kann mir jemand weiterhelfen? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Mikelweb Geschrieben 17. Mai 2012 Autor Melden Share Geschrieben 17. Mai 2012 So, eigentlich wollte ich heute ein Log mit Aufnahme schreiben. Leider sagt mir die Box auch nach dem 3ten hochfahren "Es wurde keine Festplatte gefunden!!!". Ich habe jetzt mal mitgelogt, was so ankam. (Über Putty - seriell) scheint mir aber nicht komplett zu sein. Vielleicht kann mir ja damit jemand helfen... ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured half-duplex mode enabled eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:16:36:b0 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs+lzma)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.18.5 (2011-08-01 18:48:25 CEST) starting pid 8, tty '': '/etc/init.d/rcS' mount: using /etc/fstab ##### Image-Version: Keywelt_Jul2011_V1.00 ##### Mon Aug 1 18:57:00 UTC 2011 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ tuxbox: IDE-Interface detected, Vendor: Unknown Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.16 2011/06/19 11:49:28 rhabarber1848 Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of IDE-Interface is at: 0xc5896000 dboxide: IDE-Interface detected, Vendor: Unknown dboxide: timeout, drive is still busy dboxide: sreset succeeded warte auf 'init_ide' Probing IDE interface ide0... hda: no response (status = 0xd0) warte auf 'init_ide' mount: using /etc/fstab mount: can't find /hdd in /etc/fstab hdparm: can't open '/dev/ide/host0/bus0/target0/lun0/disc': No such file or directory warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' warte auf 'init_ide' Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av: AVIA 500 LB4 found, sptsfix is off avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.215 2011/06/19 11:51:17 rhabarber1848 Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_core: masking unhandled irq reg 0 bit 6 avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $ wget: can't connect to remote host (127.0.0.1): Connection refused DVB: VES1820(0): pwm=0x48 DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp $ insmod: warning: kernel-module version mismatch multicam was compiled for kernel version 2.4.37-dbox2 while this kernel is version 2.4.37.11-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 starting pid 283, tty '': '/etc/init.d/start' Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.335 2011/06/19 12:31:44 rhabarber1848 Exp $ [sectionsd] FreeSat enabled [sectionsd] Caching max 3000 events [sectionsd] Caching 4 days [sectionsd] Caching 12 hours Extended Text [sectionsd] Events are old 120min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory [timerd] woke up from timer? false! /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead Exp $ [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 auto_fec 0 avia_gt_core: masking unhandled irq reg 0 bit 7 /var/tuxbox/config/zapit/ubouquets.xml: No such file or directory /var/plugins/operations camd_start /tmp/currentservices.xml: No such file or directory [controld] Boxtype detected: (1, Nokia D-BOX2) /var/plugins/operations sect_renice [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [CVideo::setVideoFormat] output format: 4:3(LB) starte camd2 [camd2] EMM : active [camd2] Socket=/tmp/camd.sock02 [camd] ca system id: 1722 neutrino: /lib/libpng12.so.0: no version information available (required by neutrino) neutrino: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] enable flash [neutrino] Software update enabled [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix14/Bold) [neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron [rcinput] no file /var/tuxbox/config/rc.conf was found /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] init menus... [neutrino] GUI-Personalize instance created... [neutrino] found esound, adding personalized esound entry to mainmenue [network config] Instance created [neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no [neutrino] registering as event client [scan-setup] received 43 providers [CVideo::setVideoFormat] output format: 16:9 [LCDFONT] FTC_Face_Requester (Fix15/Bold) [zapit] tuned frequency does not match request. difference: -6738 [camd] set emm caid 1722 capid 1500 PES, queue 0 normal. [camd] starting onid 0001 sid 75a2 avia_gt_core: masking unhandled irq reg 1 bit 15 [neutrino] no file /var/tuxbox/config/init.end was found [neutrino] initialized everything [camd] set emm caid 1722 capid 1500 descramble onid: 0001 sid: 75a2 status: 1d1d 20:59:03.404 [timeThread] - 17.05.2012 13:21:03, tim: Thu May 17 13:21:03 2012 [neutrino] timeset event. difference is 25028520 s, stepping... 20:59:03.459 [timeThread] Time set via DVB(TDT), going to sleep for 5 seconds. [controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3) 13:21:04.000 dmxSDT: going to sleep... 13:21:04.223 eit_set_update_filter, servicekey = 0x12d270f75a2, current version 0x16 got events 3 /bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/liblcddisplay.so.0) 13:21:05.943 getUTC(TOT): len=13 cc=DEU reg_id=0 pol=0 offs=0200 new=0100 when=Sun Oct 28 03:00:00 2012 13:21:06.014 [timeThread] - 17.05.2012 13:21:06, tim: Thu May 17 13:21:06 2012 [neutrino] timeset event. difference is 0 s, nothing to do... 13:21:06.169 [timeThread] Time set via DVB(TOT), going to sleep for 1800 seconds. [yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [timerd] using config file /var/tuxbox/config/timerd.conf [yhttpd] Webserver starting... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge