problem dbox2 philips

[walbo]

Hi

was kann kaput sein wen egal welche settings ich einspiele kommt kanal z.Z. nicht verfügbar ?

Spannung an tuner 18,6 H 13,4 V

 

bootlog

 

 

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.0 mID 02

debug: feID 00 enxID 03

debug: fpID 52 dsID 01-2f.3d.c5.07.00.00-05

debug: HWrev 01 FPrev 0.30

debug: B/Ex/Fl(MB) 32/00/08

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/philips-dbox2/kernel/os in Flash-FS

debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 173832

verify sig: 262

Branching to 0x40000

 

 

U-Boot 2010.03 (Tuxbox) (Feb 11 2011 - 14:00:53)

 

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Philips, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .... done.

env: found console with value ttyS0

env: found lcd_inverse with value 0

env: found lcd_contrast with value 15

FB: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

LCD: ready

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

............................................................... done

Un-Protected 63 sectors

### FS (squashfs) loading 'vmlinuz' to 0x200000

### FS load complete: 671071 bytes loaded to 0x200000

## Booting kernel from Legacy Image at 00200000 ...

Image Name: Linux-2.4.37.11-dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 671007 Bytes = 655.3 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.37.11-dbox2 (image@server) (gcc version 3.4.6) #8 Fr 11. Feb 1

4:01:27 CET 2011

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600

dbox_duplex=

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2a:dd:6f

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs+lzma)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.17.3 (2011-02-11 14:04:29 CET)

starting pid 8, tty '': '/etc/init.d/rcS'

mount: using /etc/fstab

 

 

##### Image-Version: Keywelt_Jan2011_V2.00 #####

 

Fri Feb 11 14:15:00 UTC 2011

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Detected STB:

Vendor: Philips

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

avia_av: $Id: avia_av_core.c,v 1.102 2010/05/25 19:58:20 dbt Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av: AVIA 600L found.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_av_core: Starting avia_gt_wdt thread.

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

udhcpc (v1.17.3) started

Setting IP address 0.0.0.0 on eth0

Sending discover...

Sending discover...

Sending discover...

No lease, forking to background

DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

insmod: warning: kernel-module version mismatch

multicam was compiled for kernel version 2.4.37-dbox2

while this kernel is version 2.4.37.11-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starting pid 180, tty '': '/etc/init.d/start'

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.320 2011/01/

22 12:17:57 seife Exp $

[sectionsd] FreeSat enabled

[sectionsd] Caching max 3000 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 120min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.

[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.

[timerd] woke up from timer? false!

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead

Exp $

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0 auto_fec 0

/var/plugins/operations camd_start

starte camd2

[camd2] EMM : active

[camd2] Socket=/tmp/camd.sock02

[camd] CA_SEND_MSG: Remote I/O error

[camd] CA_SEND_MSG: Remote I/O error

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory

/tmp/currentservices.xml: No such file or directory

[controld] Boxtype detected: (2, Philips D-BOX2)

[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1

SET VSW: 0 1

SET VSW: 1 1

SET VSW: 2 1

[CVideo::setVideoFormat] output format: 4:3(LB)

/var/plugins/operations sect_renice

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

neutrino: /lib/libpng12.so.0: no version information available (required by /lib

/liblcddisplay.so.0)

[sectionsd] getUTC: read: Connection timed out

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron

[rcinput] no file /var/tuxbox/config/rc.conf was found

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] init menus...

[neutrino] GUI-Personalize instance created...

[neutrino] found esound, adding personalized esound entry to mainmenue

[network config] Instance created

[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no

[neutrino] registering as event client

[scan-setup] received 27 sats

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[zapit] LOCK LOST! trying rezap... channel: 'Sky Cinema Ger'

[basicsocket] receive timed out. waiting process 475

[neutrino] no file /var/tuxbox/config/init.end was found

[neutrino] initialized everything

/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /

lib/liblcddisplay.so.0)

busy /tmp/zapit.sock

zap failed!

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[basicsocket] send_data: Broken pipe (n = 8/8, pid = 455)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[zapit] LOCK LOST! trying rezap... channel: 'Sky Cinema Ger'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Cinema Ger'

[zapit] LOCK LOST! trying rezap... channel: 'Sky Cinema Ger'

[sectionsd] getUTC: read: Connection timed out

 

 

mfg walbo

[Gandalf]

Geht überhaupt kein Kanal oder nur bestimmte nicht?

Hast du schon mal einen Sendersuchlauf durchgeführt?

SAT-Anschluss und LNB sind OK...wie sind die Empfangswerte?

[walbo]

Geht überhaupt kein Kanal oder nur bestimmte nicht?

Hast du schon mal einen Sendersuchlauf durchgeführt?

SAT-Anschluss und LNB sind OK...wie sind die Empfangswerte?

 

 

Hi

Alle kanäle gehen nicht ! Ber zwischen 5 bis 15 je nach Kanal SNR 56 SIG 37

Antene ist in ordnung weil wen ich meine nokia anschlise geht alles

was sagt mein log?

 

danke für schnelle Antwort

gruss

[Gandalf]

Hast du die Box aus SAT (camalpha) eingestellt?

 

Wenn ja dann flash die Box nochmal neu.

 

Im Log ist ein Problem zu sehen das eventuell auf einen Hardwarefehler hindeutet.

 

starte camd2

[camd2] EMM : active

[camd2] Socket=/tmp/camd.sock02

[camd] CA_SEND_MSG: Remote I/O error

[camd] CA_SEND_MSG: Remote I/O error

 

Der SEC oder seine Ram könnten defekt sein, ich würde trotzdem mal neu flashen und nochmal testen.