raumzeigermodulation Geschrieben 26. März 2011 Melden Share Geschrieben 26. März 2011 Hallo, ich bin am Ende. Gestern Neo abgeschmiert, Ich habe irgendwie die Kiste zum laufen bekommen. Heute will ich das Keywelt-Image aufspielen und flashe die gepackte Version (danke Windows 7) Jetzt löte ich mir ein Null-Modem-Kabel. Frage brauche ich eine komplette Verdrahtung? Die Neo nimmt z.Z. kein Tatendruck an. TXT-RXD RXD-TXT GND-GND CTS-RTS RTS-CTS reicht das? ich hänge mal die serielle Ausgabe an. Vielleicht gibt es ja eine janz einfache Lösung?! ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º U-Boot 2009.03-svn1556 (Mai 27 2010 - 01:23:56) Coolstream HDx º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Chipset information º º Vendor: Conexant Type: CX2450x (Nevis) Revision: D0 Fuses: 7EFE6D24 º º Option: 00010000 max. clock: 600 MHz Core voltage: high º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Clock information º º MPG0: 594.000 MHz MPG1: 594.000 MHz HD : 593.407 MHz AUD : 491.520 MHz º º PLL0: 432.000 MHz PLL1: 594.000 MHz PLL2: 533.333 MHz º º CPU : 594.000 MHz from PLL1 º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Memory configuration º º Start ³ End ³ Type ³ Description º ºÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ º 00000000 ³ 0FFFFFFF ³ RAM ³ System main memory bank #0 º º 10000000 ³ 17FFFFFF ³ RAM ³ System main memory bank #1 º º F0000000 ³ F1FFFFFF ³ FLASH ³ Spansion S29GL256P (256 Mbit / 16M x 16) º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Serial number: xxx-xxxxxxxx (xx-xxxxxx) º º *** Warning - bad CRC, using default environment *** º ÌÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͹ º Network configuration º º MAC: Conexant VMAC rev. 07 address: 00-C5-5C-00-07-B0 º º PHY: IC Plus IP101 address: 09 º Error: Bad gzipped data Error: no valid bmp or bmp.gz image at f0060000 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at f0080000 ... Image Name: Coolstream HD1 Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4077560 Bytes = 3.9 MB Load Address: 17048000 Entry Point: 17048000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Linux version 2.6.26.8-nevis (lucgas@macbook52.localdomain) (gcc version 4.3.2 ( crosstool-NG-1.3.2) ) #13 Sat Jul 3 00:53:49 HKT 2010 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv7), cr=00c5387f Machine: CoolStream HDx IRD Memory policy: ECC disabled, Data cache writeback CPU0: D VIPT write-back cache CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97536 Kernel command line: console=ttyRI0 mtdparts=cx2450xflash:384k(U-Boot)ro,128k(Sp lash),4096k(kernel),28160k(systemFS) root=mtd3 rootfstype=jffs2 rw mem=384M PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x30 console [ttyRI0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 384MB = 384MB total Memory: 383232KB available (3748K code, 347K data, 116K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 192 bytes NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. © 2001-2006 Red Hat, Inc. SGI XFS with security attributes, realtime, no debug enabled msgmni has been set to 748 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ttyRI0 at MMIO 0xe0412000 (irq = 2) is a CX2450x UART brd: module loaded loop: module loaded Inside emacdev_load function Inside emacdev_init function EMAC 0 Initialized RealTek 8201 PHY eth0: Link down Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods CX2450x MTD driver v1.0 (Jul 3 2010, 00:50:25) © Coolstream International Ltd . cx2450xflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 cx2450xflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 4 cmdlinepart partitions found on MTD device cx2450xflash Creating 4 MTD partitions on "cx2450xflash": 0x00000000-0x00060000 : "U-Boot" 0x00060000-0x00080000 : "Splash" 0x00080000-0x00480000 : "kernel" 0x00480000-0x02000000 : "systemFS" cx2450x-ehci cx2450x-ehci.0: Conexant CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.0: new USB bus registered, assigned bus number 1 cx2450x-ehci cx2450x-ehci.0: irq 13, io mem 0xe8000100 cx2450x-ehci cx2450x-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Conexant CX2450X EHCI USB-Controller usb usb1: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd usb usb1: SerialNumber: cx2450x-ehci.0 cx2450x-ehci cx2450x-ehci.1: Conexant CX2450X EHCI USB-Controller cx2450x-ehci cx2450x-ehci.1: new USB bus registered, assigned bus number 2 usb 1-1: new high speed USB device using cx2450x-ehci and address 2 cx2450x-ehci cx2450x-ehci.1: irq 17, io mem 0xe8001100 cx2450x-ehci cx2450x-ehci.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Conexant CX2450X EHCI USB-Controller usb usb2: Manufacturer: Linux 2.6.26.8-nevis ehci_hcd usb usb2: SerialNumber: cx2450x-ehci.1 Initializing USB Mass Storage driver... usb 1-1: configuration #1 chosen from 1 choice usb 1-1: New USB device found, idVendor=1370, idProduct=0324 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: unitedCONTRAST usb 1-1: Manufacturer: Swissbit usb 1-1: SerialNumber: 60041007C3000007 scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver Advanced Linux Sound Architecture Driver Version 1.0.16. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. VFS: Mounted root (jffs2 filesystem). Freeing init memory: 116K Warning: unable to open an initial console. Kernel panic - not syncing: No init found. Try passing init= option to kernel mfg raumzeigermodulation Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Honda-Civic Geschrieben 26. März 2011 Melden Share Geschrieben 26. März 2011 Also ob das reicht weis ich nicht ! Nachdem ich vorige Woche das letzte KeyWelt Image aufgespielt hatte stand ich vor dem selben Problem wie Du ! Ich hatte zwar ein gekauftes Nullmodem Kabel da , aber irgendwie habe ich das Gefühl mit dem Image hat was nicht gestimmt ! Ich habe vorher diverse Images ausprobiert und wollte dann mal das Keywelt Image ausprobieren ! Kannte das ja noch von D-Box2 Zeiten ! Aber das ging in die Hose ! Aber nach der Wiederherstellungsanleitung rennt die Kiste wieder . Zur Zeit habe ich das anktuelle reloadet Image drauf !Ich hoffe Du kannst Deine Box retten ! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
raumzeigermodulation Geschrieben 26. März 2011 Autor Melden Share Geschrieben 26. März 2011 Geschafft, Problem gelöst Habe das Emergency Tool benutzt. Also Nullmodem-Kabel dran und Kernel rein. Anschließend Keywelt-Image drangespielt schönen Abend noch raumzeigermodulation Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.