mopesje Geschrieben 20. Juli 2003 Melden Share Geschrieben 20. Juli 2003 weiß jemand wie ich den flasch speicher an der box löschen kann (kein system) kann sie namlich nicht neu flaschen weil sie immer von der box bootet Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
mopesje Geschrieben 20. Juli 2003 Autor Melden Share Geschrieben 20. Juli 2003 |debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 02 debug: feID 00 enxID 03 debug: fpID 52 dsID debug: HWrev 01 FPrev 0.30 debug: B/Ex/Fl(MB) 32/00/08 dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/philips-dbox2/kernel/os in Flash-FS debug: Got Block #0052 will verify ELF image, start= 0x800000, size= 200660 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Watchdog enabled Board: DBOX2, Phillips I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ....... done. find_inode failed for name=ppcboot.conf load: Failed to find inode LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: framebuffer on ttyS0 2: framebuffer on fb0 3: framebuffer on null Select option (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load compleate: 640655 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 640591 Bytes = 625 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.19 (indy@indy.de) (gcc version 3.2) #2 Sam Nov 16 08:06:02 CET 2002 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0 Decrementer Frequency = 247500000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.53 BogoMIPS Memory: 30836k available (1124k kernel code, 340k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2b:1c:dd D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 5 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "flfs (ppcboot)" 0x00040000-0x00800000 : "root (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 68k init init started: BusyBox v0.60.2 (2002.08.17-23:19+0000) multi-call [i2c-8xx]: mpc 8xx i2c init i2c-core.o: adapter registered as adapter 0. [i2c-8xx]: adapter: 0 event: init ... i2c-core.o: driver i2c saa7126 driver registered. i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0). i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [sTV6412] registered to adapter [](pos. 1). i2c-core.o: driver DBox2 Frontprocessor driver registered. i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2 ). AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $ avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'. /lib/modules/2.4.19/misc/cam.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including inva lid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.19/misc/avia.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including inva lid IO or IRQ parameters. You may find more information in syslog or the output from dmesg mice: PS/2 mouse device common for all mice BusyBox v0.60.2 (2002.08.17-23:19+0000) multi-call binary Usage: busybox [function] [arguments]... or: [function] [arguments]... BusyBox is a multi-call binary that combines many common Unix utilities into a single executable. Most people will create a link to busybox for each function they wish to use, and BusyBox will act like whatever it was invoked as. Currently defined functions: [, ash, busybox, cat, chgrp, chmod, chown, clear, cp, date, dd, df, dmesg, du, echo, env, false, find, grep, gunzip, gzip, halt, hostname, ifconfig, init, kill, killall, klogd, ln, ls, mkdir, more, mount, mv, nslookup, ping, ps, pwd, reboot, reset, rm, rmdir, route, sed, sh, sleep, sync, syslogd, tail, tar, test, touch, true, umount, uname, uptime, vi, wget, which, xargs, yes, zcat /lib/modules/2.4.19/misc/avia_gt.o: unresolved symbol avia_set_pcr lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 2 /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wait /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_wr /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_command /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_rd /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_flush_pcr /lib/modules/2.4.19/misc/dvb.o: unresolved symbol cam_read_message /lib/modules/2.4.19/misc/dvb.o: unresolved symbol cam_reset /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg_attenuati on /lib/modules/2.4.19/misc/dvb.o: unresolved symbol cam_write_message /lib/modules/2.4.19/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_attenuatio n Init TDA8044H initializing core... adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) Intializing font cache... FTC_Face_Requester (Micron/Bold) /lib/modules/2.4.19/misc/tda8044h.o: unresolved symbol register_frontend /lib/modules/2.4.19/misc/tda8044h.o: unresolved symbol unregister_frontend /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue _irq /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol unregister_demux /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pcr_p id /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_queue _write_pointer /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_alloc_irq /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol register_demux /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_t able /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_force_dis continuity /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_set_pid_c ontrol_table /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol gtx_set_queue_pointer /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_get_info /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_dmx_get_queue _write_pointer /lib/modules/2.4.19/misc/avia_gt_napi.o: unresolved symbol avia_gt_free_irq /lib/modules/2.4.19/misc/avia_gt_vbi.o: unresolved symbol avia_gt_get_info /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_show /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_clut /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_si ze /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_pos /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_hide /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_get_info /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_size /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_input_mo de /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_clut /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_set_blevel /lib/modules/2.4.19/misc/avia_gt_fb.o: unresolved symbol avia_gt_gv_get_info : No such file or directory Network LCD-Driver $Id: lcdd.cpp,v 1.51 2002/07/10 16:29:08 LazyT Exp $ [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [lcdd] load config initializing core... adding font /share/fonts/micron.ttf...OK (Micron/Regular) Intializing font cache... FTC_Face_Requester (Micron/Regular) $Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $ caching 504 hours events are old 60min after their end time [camd] /dev/dvb/card0/ca0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: DMX_STOP: Bad file descriptor $Id: zapit.cpp,v 1.193G 2002/10/17 00:44:19 Homar (gbox Version) Exp $ Softcam init failed [zapit] Emu Program /var/keys/gbox is not executable: access: No such file or di rectory [zapit] Emu mode disabled. [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [getservices.cpp] going to parse satellite Astra 19.2E [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [getservices.cpp] going to parse satellite Eutelsat 13.0E [getservices.cpp] going to parse satellite Sirius [sectionsd] DMX: /dev/ost/demux0: No such file or directory [getservices.cpp] going to parse satellite Thor 0.8W [getservices.cpp] going to parse satellite Telec.2A/D 8W [getservices.cpp] going to parse satellite HispaSat 30.0W [getservices.cpp] going to parse satellite PAS 43.0W [getservices.cpp] going to parse satellite Amos1 4.0W [getservices.cpp] going to parse satellite Turksat 1C [getservices.cpp] going to parse satellite Astra 28 OST [getservices.cpp] going to parse satellite Eut 16.0E [getservices.cpp] going to parse satellite Arabsat 26.0E [getservices.cpp] going to parse satellite ASTRA 3 A [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [zapit] reading Bouquets ....................................................... .................................. [zapit] Found 90 bouquets. [sectionsd] DMX: /dev/ost/demux0: No such file or directory [zapit] channels have been loaded succesfully /dev/ost/frontend0: No such file or directory [zapit] unable to open frontend devices. bye. Segmentation fault [sectionsd] DMX: /dev/ost/demux0: No such file or directory Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $ [controld] Boxtype detected: (02, 2, 3, Philips) set event: 00000009 [sectionsd] DMX: /dev/ost/demux0: No such file or directory [nhttpd] Neutrino HTTP-Server starting.. zapitclient: connect: No such file or directory zapitclient: connect: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [sectionsd] DMX: /dev/ost/demux0: No such file or directory [neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.308.032 2002/10/14 22:42:18 (gbox Ve rsion) Exp $ [neutrino] New Options : neutrino [-key] (Keyeditor) [-gbox] (gboxMenu) [-cug] ( Keyeditor+gboxMenu) [neutrino] frameBuffer Instance created [neutrino] vcrControl Instance created /dev/fb/0: No such file or directory framebuffer not available. FBIOPUT_VSCREENINFO: Bad file descriptor [neutrino] Error while setting framebuffer mode The system is going down NOW !! Sending SIGTERM to all processes[nhttpd] stop requested......Sending SIGKILL to all processes. STV6412 found The system is halted. Press CTRL-ALT-DEL or turn off power write 1 event's ... System halt Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Gast Rescue Geschrieben 20. Juli 2003 Melden Share Geschrieben 20. Juli 2003 Hi, debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 02 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-9e.72.ca.07.00.00-29 Du solltest Deine dsID nicht veröffentlichen debug: HWrev 01 FPrev 0.30 debug: B/Ex/Fl(MB) 32/00/08 dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed da ist der Fehler Deine Netzwerkverbindung ist fehlerhaft, so kann die Box nicht über denn Bootmanager starten. Hast Du die richtigen Einstellungen 10MBit Halbduplex und ein Crossover Kabel ? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
mopesje Geschrieben 20. Juli 2003 Autor Melden Share Geschrieben 20. Juli 2003 ja hab ich bootet aber immer von der box scheiß ding Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
mopesje Geschrieben 20. Juli 2003 Autor Melden Share Geschrieben 20. Juli 2003 unten steht drinn ppc boot gestopt lade flash-image und ich kann nur auto sense 10 base t full duplex 10 base t einstellen aber mit 10 base t ist es doch voher auch gegangen Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
kai-t Geschrieben 21. Juli 2003 Melden Share Geschrieben 21. Juli 2003 Hi, boot net failed -- ist der Fehler. Das heißt es ist wirklich und ganz sicher ein netzwerkproblem. Dein log das du postet sagt er kriegt kein Netzwerk und bootet dann von deiner Box. Das Image das drauf ist scheint etwas zerschossen zu sein. Beim laden der Datein bekommt er dann Probleme. Also Crossoverkabel und Nullmaodemkabel angeschlossen?? Also 10 BaseT ist die richtige Einstellung. Hast du deiner Netzwerkkarte ne feste IP zugewiesen? z.B. 192.168.0.1 und Subnetmask 255.255.255.0 und hast du im Bootmanage für die Dbox ne passende IP eingetragen z.B. 192.168.0.2? Richtigen Com Port Eingestellt und auf 9600. Bei TFTP Server nen Hacken drinn? PPCBoot_write ausgewählt? Dann auf utilitys Image Flashen Image auswählen. Letzte Warnung bestätigen und dann den Stecker der Box rein. Und noch was hast du Win2000 oder XP auf deinem Rechner?? Das ist schwieriger. Dann must du die Box während den ganzen einstellungen anhaben. Alles so machen wie oben, auch noch letzte Warnung bestätigen. Und dann per Reset (Pfeil nach oben und an/aus taste gleichzeitig drücken und gedrückt halten) die Box neu starten. Das schwierige dabei ist den reset nur so kurz wie möglich durzuführen d.h. sobald das LCD den querstreifen zeigt wieder losloassen. Kann auch sein das du das bei XP und 2000 2 -3 mal ausprobieren musst. Wenn nicht halt mit nem anderen Betriebssystem da muss es hgehen wenn du alles so eingestellt hast wie ich oben geschrieben hab. Gruß KAi Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge