Jump to content

"reset failed freq 362000" Fehler - Bootmanager

Gast Ollenhauer

Von Gast Ollenhauer
in Debug/Flashen/Bootmanager-Probleme ?

 Share

Empfohlene Beiträge

Gast Ollenhauer

Gast Ollenhauer

Geschrieben
Geschrieben

Hi,

möchte das aktuelle Ingo-emu-image mit bootmanaher updaten.

Bloß kommt nach 40 Sekunden folgende Fehlermeldung:

Hier das log bis zur Fehlermeldung:

 

 

wdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-25.42.2b.07.00.00-94

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 202996

verify sig: 262

Branching to 0x40000

 

 

PPCBoot 1.1.6 (TuxBox) (Jul 27 2002 - 10:11:47)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Watchdog enabled

Board: DBOX2, Nokia

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .. done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

...............................................................

Un-Protected 63 sectors

### FS (cramfs) loading 'vmlinuz' to 0x100000

### FS load compleate: 575141 bytes loaded to 0x100000

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 575077 Bytes = 561 kB = 0 MB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.19 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best

raft ;-) #1 Mit Aug 21 17:11:20 CEST 2002

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: root=/dev/mtdblock2 console=ttyS0

Decrementer Frequency = 252000000/60

mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)

Console: colour dummy device 80x25

Calibrating delay loop... 66.76 BogoMIPS

Memory: 30948k available (1004k kernel code, 356k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications

AB.

i2c-core.o: i2c core module

CPM UART driver version 0.03

ttyS00 at 0x0280 is a SMC

ttyS01 at 0x0380 is a SMC

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1e:fc:46

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

Using word write method

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "flfs (ppcboot)"

0x00040000-0x00720000 : "root (cramfs)"

0x00720000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "flash without bootloader"

0x00000000-0x00800000 : "complete flash"

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (cramfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v0.61.pre (2002.08.18-11:52+0000) multi-ca[i2c-8xx]: mpc

8xx i2c init

i2c-core.o: adapter registered as adapter 0.

[i2c-8xx]: adapter: 0

i2c-core.o: driver FOR_PROBE_ONLY registered.

i2c-core.o: driver unregistered: FOR_PROBE_ONLY

event: init ...

i2c-core.o: driver i2c audio/video switch driver registered.

i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).

i2c-core.o: driver i2c saa7126 driver registered.

i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).

i2c-core.o: driver DBox2 Frontprocessor driver registered.

i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2

).

AVIA: $Id: avia_core.c,v 1.31 2002/08/22 13:39:33 Jolt Exp $

avia_core.c: load_dram_image: Microcode verify: 2 errors.

write 1 event's ...

write 1 event's ...

der moment ist gekommen...

i2c-core.o: driver DBox2-CAM registered.

CAM: attaching CAM at 0x6e

i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).

CAM: attached to adapter

avia_gt_core: $Id: avia_gt_core.c,v 1.21 2002/08/22 13:39:33 Jolt Exp $

avia_gt_core: autodetecting chip type... AViA GTX found

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.16 2002/09/02 13:39:33 neBox Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.106 2002/09/04 14:26:49 Jolt Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_dmx: Successfully loaded ucode V0.14

avia_gt_dmx: RISC mem map size: 2048

avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...

avia_gt_core: masking unhandled irq reg 0 bit 6

avia_gt_gv: $Id: avia_gt_gv.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.17 2002/08/22 13:39:33 Jolt Exp $

avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

Init VES1820

i2c-core.o: driver VES1820 DVB demodulator registered.

VES1820: attaching VES1820 at 0x10

i2c-core.o: client [VES1820] registered to adapter [](pos. 4).

VES1820: attached to adapter

 

$Id: ves1820.c,v 1.32 2002/08/19 22:53:13 Homar Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.103 2002/09/04 13:25:01 neBox Exp $

avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $

avia_gt_vbi: got demux C-Cube - AViA eNX/GTX

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 90x36

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

avia_oss: $Id: avia_gt_oss.c,v 1.8 2002/08/22 13:39:33 Jolt Exp $

CXA2092 found

CXA2092 found

cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface on 1

 

[TIMERD]IDS: 0

$Id: sectionsd.cpp,v 1.128 2002/08/27 19:00:45 obi Exp $

caching 504 hours

events are old 60min after their end time

[camd] ca system id: 1702

$Id: zapit.cpp,v 1.216 2002/09/04 13:57:39 neBox Exp $

 

[getservices.cpp] going to parse cable Telekom/Ish

[zapit] LoadServices: success

[zapit] reading Bouquets .......

[zapit] Found 7 bouquets.

[zapit:bouquets.cpp:renumServices] In Bouquets: TV Channels #: 113, Radio Channe

ls #: 68.

[zapit:bouquets.cpp:makeRemainingChannelsBouquet] TV Channels #: 151, Radio Chan

nels #: 68.

[zapit] channels have been loaded succesfully

70: Killed

Controld $Id: controld.cpp,v 1.61 2002/08/27 19:00:45 obi Exp $

 

[controld] Boxtype detected: (01, 1, 1, Nokia)

set event: 00000009

lcddclient: connect: No such file or directory

lcddclient: connect: No such file or directory

Network LCD-Driver $Id: lcdd.cpp,v 1.54 2002/08/31 22:30:27 obi Exp $

 

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[lcdd] load config

initializing core...

adding font /share/fonts/micron.ttf...OK (Micron/Regular)

Intializing font cache...

FTC_Face_Requester (Micron/Regular)

[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.316 2002/09/04 15:57:12 dirch Exp $

 

[neutrino] frameBuffer Instance created

[neutrino] vcrControl Instance created

1024k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] enable flash

[neutrino] Software update enabled

IP : 192.168.123.16

Netmask : 255.255.255.0

Broadcast: 192.168.123.255

Gateway :

CVCRControl registered new serverdevice: 0 ngrab

[neutrino] menue setup

[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/

[CHTTPUpdater] Image-Filename: cdk.cramfs

[CHTTPUpdater] Version-Filename: cdk.cramfs.version

[neutrino] control event register

[neutrino] sectionsd event register

[neutrino] zapit event register

[neutrino] timerd event register

[camd] no card is in slot #2

[camd] no card is in slot #1

[CFrontend::setFrontend] freq 362000

[CFrontend::getEvent] timeout

zap failed!

initial zap failed - rezap

reset failed.[CFrontend::setFrontend] freq 362000

[CFrontend::getEvent] timeout

zap failed!

--------------------------------------------------------------------------------

Hier bleibt es also stehen. Jemand ne Idee ?

 

 

 

Beim Flasher folgende Fehlermeldung:

wdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS

debug: BMon V1.0 mID 01

debug: feID 7a gtxID 0b

debug: fpID 5a dsID 01-25.42.2b.07.00.00-94

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0044

 

will verify ELF image, start= 0x800000, size= 202996

verify sig: 262

Branching to 0x40000

 

 

PPCBoot 1.1.6 (TuxBox) (Jul 27 2002 - 10:11:47)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Watchdog enabled

Board: DBOX2, Nokia

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .. done.

LCD: ready

FB: loading - ready

In: serial

Out: serial

Err: serial

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select (1-3), other keys to stop autoboot: 0

=> bootp 100000 /I/emu/update_mtd5.img

BOOTP broadcast 1

BOOTP broadcast 2

BOOTP broadcast 3

BOOTP broadcast 4

BOOTP broadcast 5

 

Retry count exceeded; starting again

=>

 

----------------------------------------------------------------------

hier bleibt er beim flashen stehen!!!!!!!!!!!!!

 

Grüße Ollenhauer

Link zu diesem Kommentar
Auf anderen Seiten teilen
kai-t

kai-t

Geschrieben
Geschrieben

Du flashst gar nicht. Der fährt dein Image hoch und versucht von der Box ein mtd5.img zu flashen.

 

Dein Problem beim Bootmanager ist :

debug: Given up BOOTP/TFTP boot

boot net failed

 

Das ist ein Netzwerkproblem. Und da muss noch mehr nicht stimmen sonst würde er ja nicht normal starten. Com Kabel drann? Netzwerk ne IP Adresse zugewiesen? 10Mbit Halfduplex?? TFTP Angehackt? Image zum Flashen ausgewählt und bestätigt??

 

Gruß

Kai

Link zu diesem Kommentar
Auf anderen Seiten teilen
 Share
Gehe zur Themenübersicht

  • Wer ist Online   0 Benutzer

    • Keine registrierten Benutzer online.
×
×
  • Neu erstellen...