Sagem 1x Intel Prob

[Tassilo Horst]

Tach auch,

 

ich hab hier ne Sagem mit 1nem Intelchip. Da das AU ja allgemein nicht mehr funktioniert, wollte ich nen anderen EMU per Internetupdate raufziehen. Er findet auch die Sachen zum laden, meldet aber immer einen Fehler beim Installieren, egal welchem EMU ich installieren will. Dann dachte ich mir ich flash das Image neu, aber weder der Hallenberg Assi noch die Funktion über die Expertenfunktion brachte erfolg. Ich kann das Image zwar auf die Box kopieren, das Image wird aber nicht bei der Expertenfunktion aufgeführt.

 

Woran kann das liegen?

[BA.STA-Buliwyf]

Wohl was defekt!?

Bootlog kann hier sicher mehr helfen oder gleich an RJBader (Suche mal Reparaturadresse) kontaktieren.

[Tassilo Horst]

Hier mal das Bootlog:

 

Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS

debug: Got Block #0008debug: Got Block #0012debug: Got Block #0016debug: Got Block #0020debug: Got Block #0024debug: Got Block #0028debug: Got Block #0032debug: Got Block #0036debug: Got Block #0040

 

will verify ELF image, start= 0x800000, size= 163276

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.2.0 (Tuxbox) (Jul 26 2008 - 21:07:16)

 

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

Board: DBOX2, Sagem, BMon V1.3

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: . . | / . - \ | / . - \ done.

env: found "console"

env: found "baudrate"

env: found "dbox_duplex"

env: found "lcd_inverse"

env: found "lcd_contrast"

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 1 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 670270 bytes loaded to 0x100000

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 670206 Bytes = 654.5 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.36.6-dbox2 (image@Server) (gcc version 3.4.6) #8 Sa Jul 26 21:07:50 CEST 2008

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0,9600 dbox_duplex=2 root=/dev/mtdblock2 rootfstype=squashfs

Decrementer Frequency = 247500000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)

Console: colour dummy device 80x25

Calibrating delay loop... 65.74 BogoMIPS

Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

forced full-duplex mode enabled

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3d:b9:b4

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank

Intel/Sharp Extended Query Table at 0x0031

Using buffer write method

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2008-07-26 21:12:13 CEST)

 

 

##### Image-Version: Keywelt_Jul2008_V1_beta1 #####

 

Sat Jul 26 21:27:00 UTC 2008

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

tuxbox: no IDE-Interface detected

Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: yes, erasingempty: yes, erasependingempty: yes)

jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28

No space for garbage collection. Aborting GC thread

Detected STB:

Vendor: Sagem

Model: D-BOX2

Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: yes, erasingempty: yes, erasependingempty: yes)

jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28

rm: cannot remove '/var/lib/modules/dvb-core.o': No space left on device

insmod: preferring module /var/lib/modules/dvb-core.o

insmod: warning: kernel-module version mismatch

/var/lib/modules/dvb-core.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.36.6-dbox2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.6-dbox2/misc/dbox2_fp_input.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.6-dbox2/misc/avia_av_sptsfix.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $

avia_av: AVIA500 sptsfix is on

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_av_core: Starting avia_gt_wdt thread.

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

udhcpc (v1.7.2) started

Sending discover...

DVB: registering frontend 0:0 (Atmel AT76C651B with TUA6010XS)...

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.6-dbox2/misc/avia_gt_proc.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.

 

 

avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $

 

avia_gt_proc: found - AVIA eNX

Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: yes, erasingempty: yes, erasependingempty: yes)

jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28

/var/etc/init.d/rcS: line 287: cannot create /etc/issue.net: No space left on device

Sending discover...

Sending discover...

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.264 2008/06/23 09:27:47 seife Exp $

[sectionsd] Caching max 1500 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 120min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

No lease, failing

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

/tmp/currentservices.xml: No such file or directory

/var/plugins/operations camd_start

insmod: warning: kernel-module version mismatch

/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.6-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

 

[controld] Boxtype detected: (3, Sagem D-BOX2)

[controld] format: 4:3(LB)

[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=0

[controld] setting VideoFormat to auto

[controld] format: 4:3(LB)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[yhttpd] Webserver starting...

/var/plugins/operations epg_reinit

/var/plugins/operations sect_renice

neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[controld] setting VideoFormat to auto

[controld] format: 4:3(LB)

[neutrino] registering as event client

[sectionsd] Request of current/next information for 44d00016dca

currentEvt: '' (0000) nextEvt: '' (0000) flag: 0x20

[sectionsd] Request of current/next information for 44d00016dca

currentEvt: '' (0000) nextEvt: '' (0000) flag: 0x20

[controld] setting VideoFormat to auto

[controld] format: 4:3(LB)

23:27:49.873 changeDMX [12]-> 0 (0x4e/0xff) (31 seconds)

23:27:49.923 changeDMX [EIT]-> 0 (0x0/0x0) dummy filter (31 seconds)

[sectionsd] getUTC: read: Connection timed out

[neutrino] initialized everything

[sectionsd] Request of current/next information for 300850011