poppeye2006 Geschrieben 6. August 2008 Melden Share Geschrieben 6. August 2008 Hallo zusammen! Ich habe hier ne Nokia DBox2 (2xI), welche Probleme folgender Art macht: - meistens bleibt sie ca. 3 Minuten bei "loading kernel" stehen, bootet dann weiter und zeigt ein grünes Bild - ab und zu bootet sie auch direkt durch und zeigt dann ein grünes Bild Sie lässt sich problemlos flashen (Mit Bootmanager, oder Flash-Assi) mit und ohne RS232. Ich habe schon sämtliche Images (Keywelt, YADI) in sämtlichen Versionen ausprobiert, das Resultat war immer das gleiche, oben beschriebene :-/ Vielleicht kann mir hier ja jemand mit Hilfe des Logs des letzten Flashvorgangs auf die Sprünge helfen?! Vielen Dank im Voraus!!! Hier das LOGGING: ºdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.62.100, My IP 192.168.62.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.62.100; our IP address is 192.168.62.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.62.100; our IP address is 192.168.62.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.62.100; our IP address is 192.168.62.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.62.100; our IP address is 192.168.62.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.62.100; our IP address is 192.168.62.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 626108 (98dbc hex) Using SCC ETHERNET device TFTP from server 192.168.62.100; our IP address is 192.168.62.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################# done Bytes transferred = 579075 (8d603 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626044 Bytes = 611.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 579011 Bytes = 565.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f21000, end 01fae5c3 ... OK Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.62.202:192.168.62.100:::::off Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:a4:64 RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x006a0000 : "root (rootfs)" 0x006a0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.62.202, mask=255.255.255.0, gw=255.255.255.255, host=192.168.62.202, domain=, nis-domain=(none), bootserver=192.168.62.100, rootserver=192.168.62.100, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 565k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 72k init init started: BusyBox v1.9.0 (2008-01-05 13:28:28 CET) lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface dbox2 - ImageFlashingAssistent 3.0 - Hallenberg.com - Schreibe Backup: 8064k von 8064k (100%) Lade Flashimage... done. Sende Backup... Lösche Sektoren: 63 von 63 (100%) Schreibe Daten: 8064k von 8064k (100%) Verifziere Daten: 8064k von 8064k (100%) Sie koennen die dbox jetzt ausschalten. ------------------------------------------------------------- BootP: Request von 00509C1AA464 erhalten BootP: ARP-Eintrag mit IP: 192.168.62.202 und Mac: 00509C1AA464 gesetzt BootP: Antwort an 00509C1AA464 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1AA464 erhalten BootP: ARP-Eintrag mit IP: 192.168.62.202 und Mac: 00509C1AA464 gesetzt BootP: Antwort an 00509C1AA464 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1AA464 erhalten BootP: ARP-Eintrag mit IP: 192.168.62.202 und Mac: 00509C1AA464 gesetzt BootP: Antwort an 00509C1AA464 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Dokumente und Einstellungen\Administrator\Desktop\13.img TFTP: Transfer erfolgreich beendet TFTP: Schreibe Backup nach C:\Programme\DBOX_IFA\Backups\2008-08-06 14-36-05_874.img TFTP: Schreibe Backup nach C:\Programme\DBOX_IFA\Backups\2008-08-06 14-36-05_366.img TFTP: Transfer nicht erfolgreich TFTP: Transfer erfolgreich beendet ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: Broadcom 440x 10/100 Integrated Controller - Paketplaner-Miniport (1) IP-Adresse des Netzwerkadapters: 192.168.62.100 IP-Adresse die die dbox bekommt: 192.168.62.202 Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600) CPU 1: Intel® Pentium® M processor 1400MHz @ 412 MHz Dateiname des Images: 13.img Imagetyp: Zwei Flashs DBOX-IFA Version: 3.1 ------ Powered by http://www.dboxservice-hallenberg.de ------ Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rhabarber1848 Geschrieben 6. August 2008 Melden Share Geschrieben 6. August 2008 Besser wäre ein Bootlog des geflashten Images. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
poppeye2006 Geschrieben 6. August 2008 Autor Melden Share Geschrieben 6. August 2008 Besser wäre ein Bootlog des geflashten Images. Alles klar, hier isser: (aber irgendwie habe ich das Gefühl, dass der Bootmanager mir da nicht alles ausgegeben hat) Soll ich nochmal versuchen im Terminal zu loggen, oder reichen die Informationen aus, um die Box totzuschreiben!?!? [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...[AVS] i2c error -121 OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[412] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C1F04970 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[423] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C11247B0 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [sectionsd] getUTC: read: Connection timed out [sectionsd] getUTC: read: Connection timed out [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[425] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C11249E0 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[427] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C1124F20 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[429] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C1124820 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[431] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C1124F90 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[433] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C0F87190 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [sectionsd] getUTC: read: Connection timed out starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[435] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C0F87270 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C0FE5E90 REGS: c0fe5de0 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c0fe4000[437] 'neutrino' Last syscall: 54 last math 00000000 last altivec 00000000 GPR00: C38861D0 C0FE5E90 C0FE4000 00667030 C0FE5EC8 00000002 C0FE5EEC 00000000 GPR08: 00000000 C3880000 00000018 C00AF654 84002028 101A986C 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 00FE5F40 00000000 C0002AA8 GPR24: C0002800 10160000 00000014 C0F875F0 00000006 00000002 7FFFF4E8 00667030 Call backtrace: C0FE5EF0 C38861D0 C3886764 C0043FC0 C000285C 00000001 101293A8 1012B868 1012BDC0 1012BE28 1001E600 0F7293FC 00000000 [AVS] i2c error -121 Segmentation fault neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) swap Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rhabarber1848 Geschrieben 6. August 2008 Melden Share Geschrieben 6. August 2008 Soll ich nochmal versuchen im Terminal zu loggen? Ja, bitte. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
poppeye2006 Geschrieben 6. August 2008 Autor Melden Share Geschrieben 6. August 2008 Ja, bitte. Wie schauts hiermit??? debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 01-69.9b.2c.07.00.00-b7 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0036 will verify ELF image, start= 0x800000, size= 162964 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Dec 24 2007 - 11:57:50) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 669865 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 669801 Bytes = 654.1 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.6) #21 Mo Dez 24 11 :58:22 CET 2007 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:a4:64 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2007-12-24 12:02:36 CET) ##### Image-Version: Keywelt_Dez2007_V1 ##### Mon Dec 24 12:17:00 UTC 2007 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Nokia Model: D-BOX2 insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel vers ion 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 fp_cmd: i2c_transfer error (ret == -121) Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C3887190 SP: C1C49E40 REGS: c1c49d90 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c1c48000[54] 'insmod' Last syscall: 128 last math 00000000 last altivec 00000000 GPR00: C3887190 C1C49E40 C1C48000 00667030 C1C49E78 00000002 00000000 00000000 GPR08: C3880000 C3880000 00000001 C00AF654 28008028 10080494 10060000 00000001 GPR16: 10080000 1007C2E1 100807F0 10080420 00009032 C1C49EA0 C1BAC000 1008D75B GPR24: C1CDFB20 00000008 C388A000 C013C5C4 FFFFFFEA 00000002 C3880000 00000000 Call backtrace: C005D308 C3887190 C3886D98 C00110D4 C000285C 1002E190 10003C98 10003CD0 10003E90 0FEB23FC 00000000 Segmentation fault insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kerne l version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 Oops: kernel access of bad area, sig: 11 NIP: C00AF668 XER: 00000000 LR: C38861D0 SP: C1C49E10 REGS: c1c49d60 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c1c48000[58] 'insmod' Last syscall: 128 last math 00000000 last altivec 00000000 GPR00: C38861D0 C1C49E10 C1C48000 00667030 C1C49E48 00000002 00000001 C388D0C8 GPR08: 609EFFDD C3880000 C3887F8C C00AF654 C388D1E8 10080494 10060000 00000001 GPR16: 10080000 1007C2E1 1007C354 1007EE08 00009032 C1C49EA0 C1BD8000 1008A9FC GPR24: C1CDFE40 0000000E C388F000 C013C5C4 FFFFFFEA 00000002 C0140000 00667030 Call backtrace: C013C970 C38861D0 C388C63C C388C0D0 C00110D4 C000285C 1002E190 10003C98 10003CD0 10003E90 0FEB23FC 00000000 Segmentation fault i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos . 0). [AVS] i2c error -121 i2c-core.o: driver saa7126 registered. i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos . 1). Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
rhabarber1848 Geschrieben 6. August 2008 Melden Share Geschrieben 6. August 2008 fp_cmd: i2c_transfer error (ret == -121) Eine Google-Suche nach "fp_cmd: i2c_transfer error" zeigt, dass hier wohl ein Hardware-Defekt vorliegt. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
poppeye2006 Geschrieben 6. August 2008 Autor Melden Share Geschrieben 6. August 2008 Eine Google-Suche nach "fp_cmd: i2c_transfer error" zeigt,dass hier wohl ein Hardware-Defekt vorliegt. Kann mir jemand sagen, ob man den Frontprozessor ersetzen kann, und falls ja, was das ca. kostet? Kann so ein Frontprozessor-Defekt durch einen Postversand hervorgerufen werden? Ich habe die Box nämlich bei eBay erstanden und der Verkäufer meint, alles sei bei ihm noch in Ordnung gewesen... :-| Son MIST!!! Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
gurgel Geschrieben 6. August 2008 Melden Share Geschrieben 6. August 2008 Kann mir jemand sagen, ob man den Frontprozessor ersetzen kann, und falls ja, was das ca. kostet? Kann so ein Frontprozessor-Defekt durch einen Postversand hervorgerufen werden? Ich habe die Box nämlich bei eBay erstanden und der Verkäufer meint, alles sei bei ihm noch in Ordnung gewesen... :-| Son MIST!!! der komplette I²C-Bus funktioniert nicht mehr richtig. Das muss nicht unbedingt am Frontprozessor liegen. Die Reparaturkosten sind schwer einzuschätzen, da am I²C-Bus so einige Bauteile angeschlossen sind... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
drake1002 Geschrieben 6. August 2008 Melden Share Geschrieben 6. August 2008 Ralf-Jürgen Bader Onlinehandel & Service Untermühle 1 99947 Bad Langensalza Tel: 03603/829102 bis 21:30 Uhr kein Problem Handy: 01792357508 E-Mail: RlfJrgn860@aol.com Bei ihm könntest du mal anfragen was ne Reparatur kostet.... Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.