atsiz77 Geschrieben 22. Juli 2008 Melden Share Geschrieben 22. Juli 2008 Hallo, ich wollte heute ein neues Image auf meine Nokia Dbox2 draufspielen, dieses tuhe ich immer mit dem Flashprogramm von Hallenberg, aber irgendwie hat es heute nicht geklappt. Da beim laden der Software das Flashprogram von vorne anfängt. im log habe ich gelesen das immer der fehlermeldung"Kernel panic: kernel stack overflow" kommt. Kann mir jemand behilflich sein wie ich dieses fehler bzw. meine Dbox wieder anslaufen bringen kann? ÿdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID [url="http://Hallenberg.com"]http://Hallenberg.com[/url] debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.196, My IP 192.168.1.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 626108 (98dbc hex) Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################# done Bytes transferred = 579075 (8d603 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626044 Bytes = 611.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 579011 Bytes = 565.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f21000, end 01fae5c3 ... OK Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.1.202:192.168.1.196:::::off Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured Kernel stack overflow in process c01da000, r1=c01da40e NIP: C0003D44 XER: 8000FF7F LR: C00036E8 SP: C01DA40E REGS: c01da35e TRAP: 0600 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: C01DA416, DSISR: 00005FC1 TASK = c01da000[1] 'swapper' Last syscall: 120 last math 00000000 last altivec 00000000 GPR00: C00036E8 C01DA40E C01DA000 C01DA42E C01DA4E6 00005FC1 C1F03348 C1F03060 GPR08: 00000005 C008A8C0 00000200 C1F03070 393F3F33 00031B58 01FFB400 00000001 GPR16: FFFFFFFF 007FFF00 01FF5940 00000000 00009032 001DA41E 00000000 C00036E8 GPR24: C0003D3C 00000001 C0130000 C00B9EB4 C0130000 FFFFFFFF C0140A78 CF190000 Call backtrace: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Kernel panic: kernel stack overflow <0>Rebooting in 180 seconds..debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID [url="http://Hallenberg.com"]http://Hallenberg.com[/url] debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.196, My IP 192.168.1.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 626108 (98dbc hex) Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################# done Bytes transferred = 579075 (8d603 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626044 Bytes = 611.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 579011 Bytes = 565.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f21000, end 01fae5c3 ... OK Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.1.202:192.168.1.196:::::off Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured Kernel stack overflow in process c01da000, r1=c01da40e NIP: C0003D44 XER: 8000FF7F LR: C00036E8 SP: C01DA40E REGS: c01da35e TRAP: 0600 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: C01DA416, DSISR: 00005FC1 TASK = c01da000[1] 'swapper' Last syscall: 120 last math 00000000 last altivec 00000000 GPR00: C00036E8 C01DA40E C01DA000 C01DA42E C01DA4E6 00005FC1 C1F03348 C1F03060 GPR08: 00000005 C008A8C0 00000200 C1F03070 393F3F33 00031B58 01FFB400 00000001 GPR16: FFFFFFFF 007FFF00 01FF5940 00000000 00009032 001DA41E 00000000 C00036E8 GPR24: C0003D3C 00000001 C0130000 C00B9EB4 C0130000 FFFFFFFF C0140A78 CF190000 Call backtrace: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Kernel panic: kernel stack overflow <0>Rebooting in 180 seconds..debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID [url="http://Hallenberg.com"]http://Hallenberg.com[/url] debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.196, My IP 192.168.1.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 626108 (98dbc hex) Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################# done Bytes transferred = 579075 (8d603 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626044 Bytes = 611.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 579011 Bytes = 565.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f21000, end 01fae5c3 ... OK Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.1.202:192.168.1.196:::::off Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured Kernel stack overflow in process c01da000, r1=c01da40e NIP: C0003D44 XER: 8000FF7F LR: C00036E8 SP: C01DA40E REGS: c01da35e TRAP: 0600 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: C01DA416, DSISR: 00005FC1 TASK = c01da000[1] 'swapper' Last syscall: 120 last math 00000000 last altivec 00000000 GPR00: C00036E8 C01DA40E C01DA000 C01DA42E C01DA4E6 00005FC1 C1F03348 C1F03060 GPR08: 00000005 C008A8C0 00000200 C1F03070 393F3F33 00031B58 01FFB400 00000001 GPR16: FFFFFFFF 007FFF00 01FF5940 00000000 00009032 001DA41E 00000000 C00036E8 GPR24: C0003D3C 00000001 C0130000 C00B9EB4 C0130000 FFFFFFFF C0140A78 CF190000 Call backtrace: FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF FFFFFFFF 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Kernel panic: kernel stack overflow <0>Rebooting in 180 seconds..debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID [url="http://Hallenberg.com"]http://Hallenberg.com[/url] debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.196, My IP 192.168.1.202 debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.1.196; our IP address is 192.168.1.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) ------------------------------------------------------------- BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk TFTP: Transfer erfolgreich beendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd TFTP: Transfer erfolgreich beendet BootP: Request von 00509C1D7053 erhalten BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C1D7053 gesetzt BootP: Antwort an 00509C1D7053 gesendet TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb TFTP: Transfer erfolgreich beendet ------ Zusatzinformationen ------ Gewählter Netzwerkadapter: SiS 900-Based PCI Fast Ethernet Adapter - Kaspersky Anti-Virus NDIS Miniport (0) IP-Adresse des Netzwerkadapters: 192.168.1.196 IP-Adresse die die dbox bekommt: 192.168.1.202 Betriebssystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600) CPU 1: Intel® Pentium® 4 CPU 2.60GHz @ 2605 MHz Dateiname des Images: JtG_Neutrino_Komplett_2x__v2.3.0.img Imagetyp: Zwei Flashs DBOX-IFA Version: 3.1 ------ Powered by [url="http://www.dboxservice-hallenberg.de"]http://www.dboxservice-hallenberg.de[/url] ------ Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
webuser Geschrieben 22. Juli 2008 Melden Share Geschrieben 22. Juli 2008 das ist FTP-Linux Error, lade dein image neu runter und nochmal flashen Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.