hdd Problem

[guenthi]

Hallo zusammen

 

habe schon zum 3ten mal total Verlust der Filme auf hdd.

 

Wollte mit Totalcomander per ftp Filme von der Platte ziehen.

 

Der Ordner hdd/filme hat sich beim öffnen aufgehängt.

 

 

 

Vielleicht weiß ja jemand einen Rat

 

werde aber trotzdem die Platte wechseln:

 

 

 

Anzeige im Total Comander:

 

hdd/filme 14.09.2007 chmd 367

 

 

 

Und hier der Bootlog:

 

 

 

 

 

 

 

U-Boot 1.2.0 (Tuxbox) (Jun 12 2008 - 20:33:11)

 

 

 

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache

 

Board: DBOX2, Philips, BMon V1.0

 

Watchdog enabled

 

I2C: ready

 

DRAM: 32 MB

 

FLASH: 8 MB

 

Scanning JFFS2 FS: ...... done.

 

env: found "console"

 

env: found "baudrate"

 

env: found "lcd_inverse"

 

env: found "lcd_contrast"

 

FB: ready

 

LCD: ready

 

In: serial

 

Out: serial

 

Err: serial

 

Net: SCC ETHERNET

 

 

 

Options:

 

1: Console on null

 

2: Console on ttyS0

 

3: Console on framebuffer

 

Select option (1-3), other keys to stop autoboot: 0

 

### FS (squashfs) loading 'vmlinuz' to 0x100000

 

### FS load complete: 670218 bytes loaded to 0x100000

 

............................................................... done

 

Un-Protected 63 sectors

 

## Booting image at 00100000 ...

 

Image Name: dbox2

 

Image Type: PowerPC Linux Kernel Image (gzip compressed)

 

Data Size: 670154 Bytes = 654.4 kB

 

Load Address: 00000000

 

Entry Point: 00000000

 

Verifying Checksum ... OK

 

Uncompressing Kernel Image ... OK

 

Linux version 2.4.36.2-dbox2 (image@Server) (gcc version 3.4.6) #26 Do Jun 12 20

 

:33:44 CEST 2008

 

On node 0 totalpages: 8192

 

zone(0): 8192 pages.

 

zone(1): 0 pages.

 

zone(2): 0 pages.

 

Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfst

 

ype=squashfs

 

Decrementer Frequency = 247500000/60

 

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

 

m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)

 

Console: colour dummy device 80x25

 

Calibrating delay loop... 65.74 BogoMIPS

 

Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)

 

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

 

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

 

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

 

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

 

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

 

POSIX conformance testing by UNIFIX

 

Linux NET4.0 for Linux 2.4

 

Based upon Swansea University Computer Society NET3.039

 

Initializing RT netlink socket

 

Starting kswapd

 

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

 

devfs: boot_options: 0x1

 

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

 

squashfs: version 3.0 (2006/03/15) Phillip Lougher

 

i2c-core.o: i2c core module version 2.6.1 (20010830)

 

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

 

CPM UART driver version 0.04

 

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

 

pty: 256 Unix98 ptys configured

 

half-duplex mode enabled

 

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:0c:f2

 

loop: loaded (max 8 devices)

 

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

 

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

 

Intel/Sharp Extended Query Table at 0x0035

 

cfi_cmdset_0001: Erase suspend on write enabled

 

Creating 6 MTD partitions on "D-Box 2 flash memory":

 

0x00000000-0x00020000 : "BR bootloader"

 

0x00020000-0x00040000 : "FLFS (U-Boot)"

 

0x00040000-0x005e0000 : "root (squashfs)"

 

0x005e0000-0x00800000 : "var (jffs2)"

 

0x00020000-0x00800000 : "Flash without bootloader"

 

0x00000000-0x00800000 : "Complete Flash"

 

Linux video capture interface: v1.00

 

mice: PS/2 mouse device common for all mice

 

NET4: Linux TCP/IP 1.0 for NET4.0

 

IP Protocols: ICMP, UDP, TCP

 

IP: routing cache hash table of 512 buckets, 4Kbytes

 

TCP: Hash tables configured (established 2048 bind 4096)

 

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

 

VFS: Mounted root (squashfs filesystem) readonly.

 

Mounted devfs on /dev

 

Freeing unused kernel memory: 60k init

 

init started: BusyBox v1.7.2 (2008-06-12 20:38:01 CEST)

 

 

 

 

 

##### Image-Version: Keywelt_Jun2008_V1.3_beta3 #####

 

 

 

Thu Jun 12 20:54:00 UTC 2008

 

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

 

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

 

dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $

 

ide: late registration of driver.

 

dboxide: activating cs2

 

dboxide: address space of IDE-Interface is at: 0xc3890000

 

Probing IDE interface ide0...

 

hda: SAMSUNG SP2514N, ATA DISK drive

 

ide0 at 0x010-0x017,0x04e on irq 47

 

warte auf 'init_ide'

 

hda: attached ide-disk driver.

 

hda: host protected area => 1

 

hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63

 

Partition check:

 

/dev/ide/host0/bus0/target0/lun0: p1 p2

 

EXT2-fs warning: mounting fs with errors, running e2fsck is recommended

 

 

 

/dev/ide/host0/bus0/target0/lun0/disc:

 

warte auf 'init_ide'

 

setting acoustic management to 128

 

setting drive write-caching to 0 (off)

 

setting standby to 72 (6 minutes)

 

write-caching = 1 (on)

 

acoustic = 128 (128=quiet ... 254=fast)

 

'init_ide' fertig

 

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

 

Detected STB:

 

Vendor: Philips

 

Model: D-BOX2

 

[i2c-8xx]: mpc 8xx i2c init

 

[i2c-8xx]: adapter: 0

 

insmod: warning: kernel-module version mismatch

 

/lib/modules/2.4.36.2-dbox2/misc/dbox2_fp_input.o was compiled for kerne

 

l version 2.4.36-dbox2

 

while this kernel is version 2.4.36.2-dbox2

 

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

 

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

 

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

 

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

 

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

 

insmod: warning: kernel-module version mismatch

 

/lib/modules/2.4.36.2-dbox2/misc/avia_av.o was compiled for kernel versi

 

on 2.4.36-dbox2

 

while this kernel is version 2.4.36.2-dbox2

 

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

 

avia_av_core: Starting avia_av_wdt thread.

 

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

 

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

 

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

 

avia_gt_core: autodetecting chip type... eNX

 

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

 

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

 

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

 

avia_gt_ucode: loaded ucode v0014

 

avia_gt_ucode: ucode section filters disabled.

 

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

 

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

 

avia_gt_gv: set_input_size (width=720, height=576)

 

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

 

avia_gt_pcm_set_rate(44100)

 

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

 

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

 

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

 

avia_gt_core: Loaded AViA eNX/GTX driver

 

avia_av_core: Starting avia_gt_wdt thread.

 

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

 

avia_gt_gv: set_input_mode (mode=2)

 

avia_gt_gv: set_input_size (width=720, height=576)

 

avia_gt_gv: set_input_mode (mode=2)

 

avia_gt_gv: set_input_size (width=720, height=576)

 

avia_gt_gv: set_input_mode (mode=2)

 

avia_gt_gv: set_input_size (width=720, height=576)

 

Console: switching to colour frame buffer device 82x32

 

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

 

lcd.o: init lcd driver module

 

lcd.o: found KS0713/SED153X lcd interface

 

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

 

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

 

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

 

avia_gt_pcm_set_rate(44100)

 

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

 

insmod: warning: kernel-module version mismatch

 

/lib/modules/2.4.36.2-dbox2/misc/tda8044h.o was compiled for kernel vers

 

ion 2.4.36-dbox2

 

while this kernel is version 2.4.36.2-dbox2

 

DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator for low symbol rates)..

 

.

 

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

 

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

 

Starting the automounter

 

 

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.262 2008/05/

 

12 11:06:37 seife Exp $

 

[sectionsd] Caching max 1500 events

 

[sectionsd] Caching 4 days

 

[sectionsd] Caching 12 hours Extended Text

 

[sectionsd] Events are old 60min after their end time

 

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

 

/var/tuxbox/config/mybouquets.xml: No such file or directory

 

/var/plugins/operations camd_init

 

/var/plugins/operations cardserver_start

 

$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $

 

[zapit] MAX_SOCKETS=3

 

[zapit] PMT update enabled

 

[frontend] uncommitted_switch_mode 0

 

/var/plugins/operations camd_start

 

insmod: warning: kernel-module version mismatch

 

/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2

 

while this kernel is version 2.4.36.2-dbox2

 

DBox2 Multicam Driver v1.01 skars & doz21

 

starte mgcamd

 

tuxbox mgcamd v1.30d by mixvt (compiled Jun 12 2008 20:49:12)

 

[mg] Net:4:7:1:10s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:2:1

 

72.16.1.1:28007 Reread:4

 

[mg] Ecm cache time: 15

 

Box type: dbox2

 

Keys readed

 

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

 

[mgcam] emm thread started

 

[getservices] dup transponder id 3 onid 85

 

[getservices] dup transponder id 11 onid 85

 

[getservices] dup transponder id 2 onid 85

 

[getservices] dup transponder id 4 onid 85

 

[getservices] dup transponder id 1 onid 85

 

[mgcamd] tps update started.

 

/tmp/currentservices.xml: No such file or directory

 

$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

 

 

 

[controld] Boxtype detected: (2, Philips D-BOX2)

 

[controld] format: 4:3(LB)

 

[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1

 

SET VSW: 0 1

 

SET VSW: 1 1

 

SET VSW: 2 1

 

[controld] setting VideoFormat to auto

 

[controld] format: 4:3(LB)

 

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

 

[LCDFONT] initializing core...

 

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

 

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

 

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

 

[LCDFONT] Intializing font cache...

 

[basicsocket] send_data: Resource temporarily unavailable

 

[yhttpd] Webserver starting...

 

/var/plugins/operations sect_renice

 

/var/plugins/operations epg_reinit

 

neutrino: /lib/libpng12.so.0: no version information available (required by neut

 

rino)

 

[sectionsd] getUTC: read: Connection timed out

 

starting /bin/neutrino

 

[neutrino] frameBuffer Instance created

 

812k video mem

 

avia_gt_gv: set_input_mode (mode=2)

 

avia_gt_gv: set_input_size (width=720, height=576)

 

[neutrino] Software update enabled

 

[neutrino] enable flash

 

[lcdd] time-skin not found -> using default...

 

[lcdd] weekday-skin not found -> using default...

 

[lcdd] date-skin not found -> using default...

 

[lcdd] month-skin not found -> using default...

 

[LCDFONT] initializing core...

 

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

 

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

 

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

 

[LCDFONT] Intializing font cache...

 

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

 

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

 

/dev/input/event1: No such file or directory

 

[neutrino] menue setup

 

[controld] setting VideoFormat to auto

 

[controld] format: 4:3(LB)

 

[neutrino] received 43 sats

 

[neutrino] registering as event client

 

[basicsocket] send_data: Resource temporarily unavailable

 

[controld] setting VideoFormat to auto

 

[controld] format: 4:3(LB)

 

[neutrino] initialized everything

 

[timeThread] - 21.07.2008 11:36:08, tim: Mon Jul 21 11:36:08 2008

 

[timeThread] Time set via DVB, going to sleep for 1800 seconds.

 

09:36:08.300 dmxCN: going to sleep...

 

09:36:08.303 eit_set_update_filter, servicekey = 0x44d00016dca, current version

 

12

 

PES, queue 0 normal.

 

got 30 cmd 9F

 

CA_SET_PID error 22: Invalid argument

 

CA_SET_PID error 22: Invalid argument

 

[mg0] service 6DCA index 0 pmt pid 0 (1)

 

[CBasicClient] connect failed: /tmp/camd.sock01

 

/tmp/camd.sock01: No such file or directory

 

[CBasicClient] connect failed: /tmp/camd.sock02

 

/tmp/camd.sock02: No such file or directory

 

[mg0] No supported encryption system found

 

[mg0] stopped

 

09:36:08.722 dmxCN: waking up again - requested from .change()

 

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)

 

[controld] format: 16:9

 

09:36:10.460 dmxCN: going to sleep...

 

09:36:10.462 eit_set_update_filter, servicekey = 0x44d00016dca, current version

 

12