HDD Problem

[guenthi]

Guten Abend zusammen

 

habe schon wieder ein Problem mit meiner Interne HDD

 

Hatte Sie nach dem letzen total Ausfall(alle Filme gelöscht) neu Formatiert auf

 

ext2.

 

Einige Filme sind nicht mehr abspielbar und es stand nur noch der Titel da,keine Datei Größe

 

 

 

Habe daraufhin einen HDD check gemacht.

 

Die Fehlerhaften Daten wurden gelöscht.

 

 

 

Hat da mal jemand eine Erklärung parat .

 

Was nützt mich die ganze aufnehmerei wenn sich die Filme löschen.

 

 

 

 

 

 

 

 

 

Einstellung:

[mr.spuk]

hi

 

willkommen im Club das habe ich schon 3 mal erlebt und weis immer noch nicht warum sowas auftritt.

es kommt mir so vor das wen die Platte zu voll wird gibts ein Crash und das wars dann.

 

spuk

[wbaden]

Hallo,

 

welches Interface benutzt ihr denn?

Ich benutze schon seit Ende Januar das Interface von dbox2.net und eine samsung HM100JC, ext2. Selbst wenn die Platte voll ist, kommt es zu keinem Absturz.

[guenthi]

Hallo,

 

welches Interface benutzt ihr denn?

Ich benutze schon seit Ende Januar das Interface von dbox2.net und eine samsung HM100JC, ext2. Selbst wenn die Platte voll ist, kommt es zu keinem Absturz.

 

Hallo

 

 

Ich habe das Interface von Hallenberg ,Festplatte 3,5 zoll 250 GB Samsung.

[mr.spuk]

hi

 

habe auch den Hallenberg IF erste generation und 2.5" samsung hdd 120 gb.

 

spuk

[guenthi]

Hallo Zusammen

jetzt hat sich mein HDD/Filme ordner in Luft aufgelöst

 

Hier mal der Bootlog

ich hoffe es kann jemand was damit anfangen?

 

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

half-duplex mode enabled<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c

:0c:f2

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2008-04-25 04:28:46 CEST)

 

 

##### Image-Version: Keywelt_Apr2008_V1.1 #####

 

Mon Apr 21 03:40:00 UTC 2008

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

dboxide: $Id: main.c,v 1.12 2007/11/03 10:32:16 (alt. IRQ) dbt Exp $

ide: late registration of driver.

dboxide: activating cs2

dboxide: address space of IDE-Interface is at: 0xc3890000

Probing IDE interface ide0...

hda: SAMSUNG SP2514N, ATA DISK drive

ide0 at 0x010-0x017,0x04e on irq 47

hda: attached ide-disk driver.

hda: host protected area => 1

hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63

Partition check:

/dev/ide/host0/bus0/target0/lun0: p1 p2

Adding Swap: 104380k swap-space (priority -1)

warte auf 'init_ide'

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

 

/dev/ide/host0/bus0/target0/lun0/disc:

setting acoustic management to 128

setting drive write-caching to 0 (off)

setting standby to 72 (6 minutes)

write-caching = 1 (on)

acoustic = 128 (128=quiet ... 254=fast)

'init_ide' fertig

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Philips

Model: D-BOX2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.2-dbox2/misc/dbox2_fp_input.o was compiled for kerne

l version 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.2-dbox2/misc/avia_av.o was compiled for kernel versi

on 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... eNX

avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_av_core: Starting avia_gt_wdt thread.

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.36.2-dbox2/misc/tda8044h.o was compiled for kernel vers

ion 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator for low symbol rates)..

.

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Starting the automounter

 

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.260 2008/03/

24 19:14:50 dbt Exp $

[sectionsd] Caching max 1500 events

[sectionsd] Caching 4 days

[sectionsd] Caching 12 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[eitThread] pid 234 start

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.410k 2008/04/08 10:00:00 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

/var/plugins/operations camd_start

insmod: warning: kernel-module version mismatch

/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2

while this kernel is version 2.4.36.2-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starte mgcamd

tuxbox mgcamd v1.30d by mixvt (compiled Jun 12 2008 20:49:12)

[mg] Net:4:7:1:10s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:2:1

72.16.1.1:28007 Reread:4

[mg] Ecm cache time: 15

Box type: dbox2

Keys readed

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 2 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

[mgcam] emm thread started

[mgcamd] tps update started.

/tmp/currentservices.xml: No such file or directory

$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

 

[controld] Boxtype detected: (2, Philips D-BOX2)

[controld] format: 4:3(LB)

[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1

SET VSW: 0 1

SET VSW: 1 1

SET VSW: 2 1

[controld] setting VideoFormat to auto

[controld] format: 4:3(LB)

[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[basicsocket] send_data: Resource temporarily unavailable

[yhttpd] Webserver starting...

/var/plugins/operations sect_renice

/var/plugins/operations epg_reinit

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

[sectionsd] getUTC: read: Connection timed out

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

/dev/input/event1: No such file or directory

[neutrino] menue setup

[controld] setting VideoFormat to auto

[controld] format: 4:3(LB)

[neutrino] received 43 sats

[neutrino] registering as event client

[basicsocket] send_data: Resource temporarily unavailable

[controld] setting VideoFormat to auto

[controld] format: 4:3(LB)

[neutrino] initialized everything

[timeThread] - 03.07.2008 17:46:20, tim: Thu Jul 3 17:46:20 2008

[timeThread] Time set via DVB, going to sleep for 1800 seconds.

PES, queue 0 normal.

got 30 cmd 9F

CA_SET_PID error 22: Invalid argument

CA_SET_PID error 22: Invalid argument

[mg0] service 6DCA index 0 pmt pid 0 (1)

[CBasicClient] connect failed: /tmp/camd.sock01

/tmp/camd.sock01: No such file or directory

[CBasicClient] connect failed: /tmp/camd.sock02

/tmp/camd.sock02: No such file or directory

[mg0] No supported encryption system found

[mg0] stopped

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)

[controld] format: 16:9

15:46:34.375 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:36.487 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:38.488 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:40.364 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:42.238 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:44.255 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:46.347 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:48.318 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:50.168 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:52.067 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:54.146 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:56.232 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:46:58.161 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:00.105 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:02.040 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:04.039 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:06.156 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:08.028 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:09.914 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:11.862 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:13.860 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:15.996 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:17.869 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

[sectionsd] DMX::readNbytes read: Value too large for defined data type

15:47:21.686 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:23.744 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:25.793 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:27.648 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:29.655 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

15:47:31.591 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] f

ilter 0x60 mask 0xf0

[guenthi]

Hier noch was

Diese Anzeige hab ich.

 

[guenthi]

Hallo

habe bis jetzt leider keine Antwort auf den Bootlog bekommen.

Habe hier mal über Telnet HDDcheck gestartet.

Ich hoffe es kann mir jemand helfen

Das Ergebnis:

 

 

Unattached inode 306

Connect to /lost+found? yes

 

Inode 306 ref count is 2, should be 1. Fix? yes

 

Unattached inode 307

Connect to /lost+found? yes

 

Inode 307 ref count is 2, should be 1. Fix? yes

 

Unattached inode 308

Connect to /lost+found? yes

 

Inode 308 ref count is 2, should be 1. Fix? yes

 

Unattached inode 309

Connect to /lost+found? yes

 

Inode 309 ref count is 2, should be 1. Fix? yes

 

Unattached inode 310

Connect to /lost+found? yes

 

Inode 310 ref count is 2, should be 1. Fix? yes

 

Unattached inode 311

Connect to /lost+found? yes

 

Inode 311 ref count is 2, should be 1. Fix? yes

 

Unattached inode 312

Connect to /lost+found? yes

 

Inode 312 ref count is 2, should be 1. Fix? yes

 

Unattached inode 313

Connect to /lost+found? yes

 

Inode 313 ref count is 2, should be 1. Fix? yes

 

Unattached inode 314

Connect to /lost+found? yes

 

Inode 314 ref count is 2, should be 1. Fix? yes

 

Unattached inode 315

Connect to /lost+found? yes

 

Inode 315 ref count is 2, should be 1. Fix? yes

 

Unattached inode 316

Connect to /lost+found? yes

 

Inode 316 ref count is 2, should be 1. Fix? yes

 

Unattached inode 317

Connect to /lost+found? yes

 

Inode 317 ref count is 2, should be 1. Fix? yes

 

Unattached inode 318

Connect to /lost+found? yes

 

Inode 318 ref count is 2, should be 1. Fix? yes

 

Unattached inode 319

Connect to /lost+found? yes

 

Inode 319 ref count is 2, should be 1. Fix? yes

 

Unattached inode 326

Connect to /lost+found? yes

 

Inode 326 ref count is 2, should be 1. Fix? yes

 

Unattached inode 327

Connect to /lost+found? yes

 

Inode 327 ref count is 2, should be 1. Fix? yes

 

Unattached inode 328

Connect to /lost+found? yes

 

Inode 328 ref count is 2, should be 1. Fix? yes

 

Unattached inode 329

Connect to /lost+found? yes

 

Inode 329 ref count is 2, should be 1. Fix? yes

 

Pass 5: Checking group summary information

Block bitmap differences: -(65542--98303) -(99335--131071) -(131079--163839) -(

164871--196607) -(196615--229375) -(230407--262143) -(262150--294911) -(295943--

327679) -(327686--360447) -(360454--393215) -(393222--425983) -(425990--458751)

-(458758--491519) -(491526--524287) -(524294--557055) -(557062--589823) -(589830

--622591) -(622598--655359) -(655366--688127) -(688134--720895) -(720902--753663

) -(753670--786431) -(786438--819199) -(820231--851967) -(851974--857900) -(7067

730--7077887) -(7077894--7110655) -(7110662--7143423) -(7143430--7176191) -(7176

198--7208959) -(7208966--7241727) -(7241734--7274495) -(7274502--7307263) -(7307

270--7340031) -(7340038--7372799) -(7372806--7405567) -(7405574--7438335) -(7438

342--7471103) -(7471110--7503871) -(7503878--7536639) -(7536646--7569407) -(7569

414--7602175) -(7602182--7634943) -(7634950--7667711) -(7667718--7700479) -(7700

486--7733247) -(7733254--7766015) -(7766022--7798783) -(7798790--7831551) -(7831

558--7864319) -(7864326--7897087) -(7897094--7907893)

Fix? yes

 

Free blocks count wrong for group #2 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #3 (0, counted=31737).

Fix? yes

 

Free blocks count wrong for group #4 (0, counted=32761).

Fix? yes

 

Free blocks count wrong for group #5 (0, counted=31737).

Fix? yes

 

Free blocks count wrong for group #6 (0, counted=32761).

Fix? yes

 

Free blocks count wrong for group #7 (0, counted=31737).

Fix? yes

 

Free blocks count wrong for group #8 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #9 (0, counted=31737).

Fix? yes

 

Free blocks count wrong for group #10 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #11 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #12 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #13 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #14 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #15 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #16 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #17 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #18 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #19 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #20 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #21 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #22 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #23 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #24 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #25 (0, counted=31737).

Fix? yes

 

Free blocks count wrong for group #26 (26835, counted=32762).

Fix? yes

 

Free blocks count wrong for group #215 (22604, counted=32762).

Fix? yes

 

Free blocks count wrong for group #216 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #217 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #218 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #219 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #220 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #221 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #222 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #223 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #224 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #225 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #226 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #227 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #228 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #229 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #230 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #231 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #232 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #233 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #234 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #235 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #236 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #237 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #238 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #239 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #240 (0, counted=32762).

Fix? yes

 

Free blocks count wrong for group #241 (21962, counted=32762).

Fix? yes

 

Free blocks count wrong (48619431, counted=50246527).

Fix? yes

 

Inode bitmap differences: +282 +285

Fix? yes

 

Free inodes count wrong for group #2 (115, counted=93).

Fix? yes

 

Directories count wrong for group #2 (1, counted=0).

Fix? yes

 

Free inodes count wrong (238438, counted=238416).

Fix? yes

 

 

/dev/ide/host0/bus0/target0/lun0/part2: ***** FILE SYSTEM WAS MODIFIED *****

 

48 inodes used (0.02%)

1 non-contiguous inode (2.1%)

# of inodes with ind/dind/tind blocks: 44/44/27

10776375 blocks used (17.66%)

0 bad blocks

15 large files

 

33 regular files

4 directories

0 character device files

1 block device file

0 fifos

0 links

0 symbolic links (0 fast symbolic links)

1 socket

--------

8 files

/var #

/var #