adrienne Geschrieben 28. April 2008 Melden Share Geschrieben 28. April 2008 hallo meine nokia 2 bleibt beim hoch booten stehen immer kermel wird geladen . hab schon versucht neues image drauf zu machen bleibt aber immer bei lade software stehen ~debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID http://Hallenberg.com debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled debug: autoboot aborted from terminal dbox2:root> boot net net net net net net net net net net debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168., My IP 192.168. debug: Sending TFTP-request for file u-boot will verify ELF image, start= 0x800000, size= 140064 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.; our IP address is 192.168.178.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.; our IP address is 192.168.178.202 Filename 'logo-lcd'. Load address: 0x100000 Loading: ## done Bytes transferred = 7680 (1e00 hex) BOOTP broadcast 1 Using SCC ETHERNET device TFTP from server 192.168.our IP address is 192.168.178.202 Filename 'u-boot'. Load address: 0x100000 Loading: Using SCC ETHERNET device TFTP from server 192.168.; our IP address is 192.168.178.202 Filename 'logo-fb'. Load address: 0x100000 Loading: #################################### done Bytes transferred = 179877 (2bea5 hex) Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 Using SCC ETHERNET device TFTP from server 192.168.; our IP address is 192.168.178.202 Filename 'kernel-cdk'. Load address: 0x100000 Loading: ################################################################# ########################################################## done Bytes transferred = 626108 (98dbc hex) Using SCC ETHERNET device TFTP from server 192.168; our IP address is 192.168.178.202 Filename 'u-initrd'. Load address: 0x400000 Loading: ################################################################# ################################################# done Bytes transferred = 579075 (8d603 hex) ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 626044 Bytes = 611.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 00400000 ... Image Name: Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 579011 Bytes = 565.4 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 01f21000, end 01fae5c3 ... OK Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.178.202:192.168.:::::off Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (2002081cool Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:41:78:b8 RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x006a0000 : "root (rootfs)" 0x006a0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.178.202, mask=255.255.255.0, gw=255.255.255.255, host=192.168.178.202, domain=, nis-domain=(none), bootserver=192.168. rootserver=192.168., rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 565k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 72k init Oops: kernel access of bad area, sig: 11 NIP: C0036494 XER: 00000000 LR: C003647C SP: C01DBD20 REGS: c01dbc70 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0400000C, DSISR: C2000000 TASK = c01da000[1] 'init' Last syscall: 24 last math 00000000 last altivec 00000000 GPR00: 00000000 C01DBD20 C01DA000 C1BF6510 C010CCA0 00000505 C01D69A8 C1BF6030 GPR08: BA2E8BA3 04000000 C0122970 C1BF61F0 24002028 1004C070 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 C0060448 001DBF20 00000000 C1FD9400 GPR24: C01C0DF8 C1FD9400 00000400 00000000 C01C0DF8 C1BF6510 00000100 C01C0DF8 Call backtrace: C003647C C0036E00 C0060B24 C002129C C0021350 C0023D74 C001E7F8 C000A8F8 C00036E8 10003184 1000333C 100034E4 0FEB160C 00000000 Kernel panic: Attempted to kill init! <0>Rebooting in 180 seconds.. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.