Hermann04 Geschrieben 18. Januar 2008 Melden Share Geschrieben 18. Januar 2008 Hallo, mein Problem ist, das die Box garnicht (nur grünes Display) oder manchmal bis "loading kernel" hochläuft. Nur grünes Display: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS Board_EventWait: timed out debug: WARNING: unsupported FP ID 0x0 debug: write to fp io reset reg failed, rc -22 loading kernel: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.2 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID xx-xx.xx.xx.xx.xx.xx-xx debug: HWrev 21 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 154948 verify sig: 262 Branching to 0x40000 U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:33:20:e5 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.1.3 (2006.08.31-18:14+0000) multi-call mount: Mounting /dev/mtdblock/2 on /var failed: No such file or directory event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 fp_cmd: i2c_transfer error (ret == -121) Oops: kernel access of bad area, sig: 11 NIP: C00B430C XER: 00000000 LR: C3894190 SP: C1C2BE40 REGS: c1c2bd90 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c1c2a000[36] 'insmod' Last syscall: 128 last math 00000000 last altivec 00000000 GPR00: C3894190 C1C2BE40 C1C2A000 00667030 C1C2BE78 00000002 00000000 00000000 GPR08: C3890000 C3890000 00000003 C00B42F8 28008028 10085CCC 00000001 10060000 GPR16: 00000001 10080000 1014D1B8 1014CDE8 00009032 C1C2BEA0 C1BA0000 1015A688 GPR24: C1C67920 00000008 C3897000 C01475C8 FFFFFFEA 00000002 C3890000 00000000 Call backtrace: C0065964 C3894190 C3893D98 C0010FF4 C000285C 100279CC 10004198 10004214 0FEBF1EC 00000000 Segmentation fault Oops: kernel access of bad area, sig: 11 NIP: C00B430C XER: 00000000 LR: C38931D0 SP: C1C2BE10 REGS: c1c2bd60 TRAP: 0300 Not tainted MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0066705C, DSISR: C0000000 TASK = c1c2a000[40] 'insmod' Last syscall: 128 last math 00000000 last altivec 00000000 GPR00: C38931D0 C1C2BE10 C1C2A000 00667030 C1C2BE48 00000002 00000001 C389A0C8 GPR08: 609EFFDD C3890000 C3894F90 C00B42F8 C389A1E8 10085CCC 00000001 10060000 GPR16: 00000001 10080000 1014BBD4 1014B808 00009032 C1C2BEA0 C1BB5000 1015779C GPR24: C1C67240 0000000E C389C000 C01475C8 FFFFFFEA 00000002 C0150000 00667030 Call backtrace: C0147974 C38931D0 C389963C C38990D0 C0010FF4 C000285C 100279CC 10004198 10004214 0FEBF1EC 00000000 Segmentation fault i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [CXA2126] registered to adapter [PowerPC 8xx I2C adapter](pos . 0). i2c-core.o: driver saa7126 registered. i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos . 1). Kann man damit den Fehler lokalisieren ? Reicht das für eine Fehleranalyse bei Ralf-Jürgen ? Bis dann Hermann Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Klo Geschrieben 18. Januar 2008 Melden Share Geschrieben 18. Januar 2008 Hallo, dein Frontprozessor ist defekt - da hilft nur noch die Reparatur. Gruß Klo Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Hermann04 Geschrieben 18. Januar 2008 Autor Melden Share Geschrieben 18. Januar 2008 Danke für die schnelle Antwort. Mal sehen was die Rep. bei Ralf-Jürgen kostet. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.