nokia dbox2 defekt?

[uwe62]

hi all..

 

habe eine weitere dbox2 nokia sat bekommen und nach dem 5. flashen funzte sie entlich, nun nach 3 stunden mal ein bootlog:

 

 

 

debug: BMon V1.0 mID 01

debug: feID dd gtxID 0b

debug: fpID 5a dsID xxxxxxxxxxxxxxxxxxxxxxxxxxxx

debug: HWrev X5 SWrev 0.81

debug: B/Ex/Fl(MB) 32/00/08

WATCHDOG reset enabled

dbox2:root> debug:

BOOTP/TFTP bootstrap loader (v0.3)

debug:

debug: Transmitting BOOTP request via broadcast

debug: Given up BOOTP/TFTP boot

boot net failed

 

Flash-FS bootstrap loader (v1.5)

 

Found Flash-FS superblock version 3.1

Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS

debug: Got Block #0036

 

will verify ELF image, start= 0x800000, size= 162920

verify sig: 262

Branching to 0x40000

 

 

U-Boot 1.2.0 (Tuxbox) (Nov 27 2007 - 16:34:18)

 

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache

*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***

Board: DBOX2, Nokia, BMon V1.0

Watchdog enabled

I2C: ready

DRAM: 32 MB

FLASH: 8 MB

Scanning JFFS2 FS: .... done.

FB: ready

LCD: ready

In: serial

Out: serial

Err: serial

Net: SCC ETHERNET

 

Options:

1: Console on null

2: Console on ttyS0

3: Console on framebuffer

Select option (1-3), other keys to stop autoboot: 0

### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 669734 bytes loaded to 0x100000

............................................................... done

Un-Protected 63 sectors

## Booting image at 00100000 ...

Image Name: dbox2

Image Type: PowerPC Linux Kernel Image (gzip compressed)

Data Size: 669670 Bytes = 654 kB

Load Address: 00000000

Entry Point: 00000000

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.4) #40 Di Nov 27 16

:34:55 CET 2007

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs

Decrementer Frequency = 252000000/60

m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)

m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)

Console: colour dummy device 80x25

Calibrating delay loop... 66.96 BogoMIPS

Memory: 30828k available (1144k kernel code, 336k data, 60k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

i2c-core.o: i2c core module version 2.6.1 (20010830)

i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)

CPM UART driver version 0.04

ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2

pty: 256 Unix98 ptys configured

eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:8e:56

loop: loaded (max 8 devices)

D-Box 2 flash driver (size->0x800000 mem->0x10000000)

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank

Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Creating 6 MTD partitions on "D-Box 2 flash memory":

0x00000000-0x00020000 : "BR bootloader"

0x00020000-0x00040000 : "FLFS (U-Boot)"

0x00040000-0x005e0000 : "root (squashfs)"

0x005e0000-0x00800000 : "var (jffs2)"

0x00020000-0x00800000 : "Flash without bootloader"

0x00000000-0x00800000 : "Complete Flash"

Linux video capture interface: v1.00

mice: PS/2 mouse device common for all mice

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 60k init

init started: BusyBox v1.7.2 (2007-11-27 16:39:07 CET)

 

 

##### Image-Version: Keywelt_Nov2007_V1 #####

 

Tue Nov 27 16:54:00 UTC 2007

event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $

Detected STB:

Vendor: Nokia

Model: D-BOX2

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel vers

ion 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

[i2c-8xx]: mpc 8xx i2c init

[i2c-8xx]: adapter: 0

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kerne

l version 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $

$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $

DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).

dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $

insmod: warning: kernel-module version mismatch

/lib/modules/2.4.35.3-dbox2/misc/avia_av.o was compiled for kernel versi

on 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $

avia_av_core: Starting avia_av_wdt thread.

[AVS] i2c error -121

avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $

avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $

avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $

avia_gt_core: autodetecting chip type... GTX

avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $

avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $

avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $

avia_gt_core: masking unhandled irq reg 1 bit 11

avia_gt_core: masking unhandled irq reg 1 bit 13

avia_gt_ucode: loaded ucode v0014

avia_gt_ucode: ucode section filters disabled.

avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...

avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $

avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $

avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $

avia_gt_core: Loaded AViA eNX/GTX driver

avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

Console: switching to colour frame buffer device 82x32

avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device

lcd.o: init lcd driver module

lcd.o: found KS0713/SED153X lcd interface

avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $

avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $

avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $

avia_gt_pcm_set_rate(44100)

avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $

[AVS] i2c error -121

[AVS] i2c error -121

avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $

avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

 

Please press Enter to activate this console. [AVS] i2c error -121

$Id: sectionsd.cpp,v 1.249 2007/10/30 08:48:23 seife Exp $

[sectionsd] Caching max 1000 events

[sectionsd] Caching 1 days

[sectionsd] Caching 6 hours Extended Text

[sectionsd] Events are old 60min after their end time

/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory

/var/tuxbox/config/mybouquets.xml: No such file or directory

[timeThread] Time set via NTP, going to sleep for 1800 seconds.

/var/plugins/operations camd_init

/var/plugins/operations cardserver_start

$Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $

[zapit] MAX_SOCKETS=3

[zapit] PMT update enabled

[frontend] uncommitted_switch_mode 0

[frontend.cpp:CFrontend:60] /dev/dvb/adapter0/frontend0: No such file or directo

ry

[AVS] i2c error -121

/var/plugins/operations camd_start

insmod: warning: kernel-module version mismatch

/var/modules/multicam.o was compiled for kernel version 2.4.34-dbox2

while this kernel is version 2.4.35.3-dbox2

DBox2 Multicam Driver v1.01 skars & doz21

starte camd2

[camd2] EMM : active

[camd2] Socket=/tmp/camd.sock02

[AVS] i2c error -121

[getservices] /var/tuxbox/config/zapit/myservices.xml found.

[getservices] dup transponder id 3 onid 85

[getservices] dup transponder id 11 onid 85

[getservices] dup transponder id 2 onid 85

[getservices] dup transponder id 4 onid 85

[getservices] dup transponder id 1 onid 85

/tmp/currentservices.xml: No such file or directory

starte scam

$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

 

[controld] Boxtype detected: (1, Nokia D-BOX2)

[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)

[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)

[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)

[LCDFONT] Intializing font cache...

[yhttpd] Webserver starting...

/var/plugins/operations sect_renice

/var/plugins/operations epg_reinit

neutrino: /lib/libpng12.so.0: no version information available (required by neut

rino)

[AVS] i2c error -121

starting /bin/neutrino

[neutrino] frameBuffer Instance created

812k video mem

avia_gt_gv: set_input_mode (mode=2)

avia_gt_gv: set_input_size (width=720, height=576)

[neutrino] Software update enabled

[neutrino] enable flash

[lcdd] time-skin not found -> using default...

[lcdd] weekday-skin not found -> using default...

[lcdd] date-skin not found -> using default...

[lcdd] month-skin not found -> using default...

[LCDFONT] initializing core...

[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)

[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)

[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)

[LCDFONT] Intializing font cache...

[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1

[AVS] i2c error -121

[LCDFONT] FTC_Face_Requester (Fix15/Bold)

[LCDFONT] FTC_Face_Requester (Fix14/Bold)

[basicsocket] receive timed out. waiting process 394

[CBasicClient] receive failed: /tmp/controld.sock

busy /tmp/controld.sock

[basicsocket] receive timed out. waiting process 394

[CBasicClient] receive failed: /tmp/controld.sock

busy /tmp/controld.sock

[basicsocket] receive timed out. waiting process 394

[CBasicClient] receive failed: /tmp/controld.sock

busy /tmp/controld.sock

/dev/input/event1: No such file or directory

[neutrino] menue setup

[neutrino] received 44 sats

[neutrino] registering as event client

saa7126_readbuf: i2c read error (ret == -121)

saa7126_readbuf: i2c read error (ret == -121)

[controld] setting VideoFormat to auto

[AVS] i2c error -121

[basicsocket] send_data: Broken pipe

[basicsocket] send_data: Broken pipe

[basicsocket] send_data: Broken pipe

[controld] setting VideoFormat to auto

[AVS] i2c error -121

[basicsocket] receive timed out. waiting process 394

[CBasicClient] receive failed: /tmp/controld.sock

busy /tmp/controld.sock

[basicsocket] send_data: Broken pipe

[AVS] i2c error -121

[controld] setting VideoFormat to auto

[AVS] i2c error -121

[basicsocket] receive timed out. waiting process 394

[CBasicClient] receive failed: /tmp/controld.sock

[neutrino] initialized everything

busy /tmp/controld.sock

[basicsocket] send_data: Broken pipe

[AVS] i2c error -121

zap failed!

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

[AVS] i2c error -121

 

 

hm, sehr ungewöhnlich, etwas defekt?

nach eine weile ohne strom löppt sie wieder, jedoch nicht lange.

 

 

hat bitte jemand ein tip?

 

 

cu uwe

[Ceekay1]

[AVS] i2c error -121

 

saa7126_readbuf: i2c read error (ret == -121)

 

[controld] setting VideoFormat to auto

 

[AVS] i2c error -121

Also ich würde mal die Temperaturen des Chips checken. Scheint als gäbe es mit dem Teil Probleme

[drake1002]

@uwe62

 

beim nächsten Bootlogpost bitte die DsID (3.Zeile Bootlog) unkenntlich machen bzw.nach einfügen und vor speichern des Beitrages einfach löschen.

[Klo]

Moinsen,

 

also ein Temperaturproblem schließe ich an dieser Stelle mal aus..

 

Letztlich können es viele Dinge sein, die diesen Fehler verursachen - auch der Tuner ist über I²C mit dem Frontprozessor verbunden.

 

 

Zumindest liegt ein Hardwareproblem vor.

 

Gruß

Klo