Freekstyle Geschrieben 10. Dezember 2007 Melden Share Geschrieben 10. Dezember 2007 Hallo, habe folgendes Problem mit einer Sagem Dbox: Wenn die Box kalt ist startet sie bis im Display "loading kernel" erscheint. Da bleibt sie dann hängen. Wenn ich aber die Box mit einem Heizlüfter "vorheize" startet sie normal. Normal kenn ich das Problem mit defekten Elkos, aber da startet ja dann das Netzteil überhaupt nicht. Ich hab mal die Bootlogs angehängt. Wenn sie hängen bleibt: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-bb.xxxxxxxxxxxxxxxx debug: HWrev 01 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 162920 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Nov 27 2007 - 16:34:18) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 669734 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 669670 Bytes = 654 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC => Wenn sie normal startet: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 03 debug: feID 00 enxID 03 debug: fpID 52 dsID 01-bb.xxxxxxxxxxxxx debug: HWrev 01 FPrev 0.23 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 162920 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Nov 27 2007 - 16:34:18) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Sagem, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 669734 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 669670 Bytes = 654 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.4) #40 Di Nov 27 16 :34:55 CET 2007 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30828k available (1144k kernel code, 336k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:30:24:43 loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005e0000 : "root (squashfs)" 0x005e0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.7.2 (2007-11-27 16:39:07 CET) ##### Image-Version: Keywelt_Nov2007_V1 ##### Tue Nov 27 16:54:00 UTC 2007 event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Sagem Model: D-BOX2 insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel vers ion 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kerne l version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/avia_av.o was compiled for kernel versi on 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_core: Starting avia_av_wdt thread. avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_av_core: Starting avia_gt_wdt thread. avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ insmod: warning: kernel-module version mismatch /lib/modules/2.4.35.3-dbox2/misc/at76c651.o was compiled for kernel vers ion 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 DVB: registering frontend 0:0 (VES1993)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.249 2007/10/ 30 08:48:23 seife Exp $ [sectionsd] Caching max 6000 events [sectionsd] Caching 14 days [sectionsd] Caching 6 hours Extended Text [sectionsd] Events are old 60min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled [frontend] uncommitted_switch_mode 0 /var/plugins/operations camd_start insmod: warning: kernel-module version mismatch /var/modules/multicam.o was compiled for kernel version 2.4.34-dbox2 while this kernel is version 2.4.35.3-dbox2 DBox2 Multicam Driver v1.01 skars & doz21 starte mgcamd tuxbox mgcamd v1.25 by mixvt (compiled Sep 13 2007 20:50:31) [mg] Net:4:7:1:10s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:2:1 72.16.1.1:28007 Reread:4 [mg] Ecm cache time: 15 Box type: dbox2 Keys readed [mgcam] emm thread started [mgcamd] tps update started. [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $ [controld] Boxtype detected: (3, Sagem D-BOX2) [controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1 [yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations sect_renice /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) starting /bin/neutrino [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] received 44 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything PES, queue 0 normal. got 20 cmd 9F [mg0] service 701 index 0 pmt pid 0 (1) [mg0] No supported encryption system found [mg0] stopped [CBasicClient] connect failed: /tmp/camd.sock01 /tmp/camd.sock01: No such file or directory [CBasicClient] connect failed: /tmp/camd.sock02 /tmp/camd.sock02: No such file or directory [controld] VIDEO_EVENT_SIZE_CHANGED 480x576 (4:3 -> 4:3) [timeThread] - 10.12.2007 18:37:46, tim: Mon Dec 10 18:37:46 2007 [timeThread] Time set via DVB, going to sleep for 1800 seconds. So wie ich das Bootlog lese stimmt die Imagegröße nicht, oder? Hab das Image aber schon öfter neu geflasht. Wäre für einen Tip dankbar. Gruß, Freekstyle Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Freekstyle Geschrieben 13. Dezember 2007 Autor Melden Share Geschrieben 13. Dezember 2007 Hallo, hat wirklich keiner einen Tip? Gruß, Freekstyle Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Maddy 76 Geschrieben 13. Dezember 2007 Melden Share Geschrieben 13. Dezember 2007 Moin! Hört sich für mich nach einer kalten Lötstelle an. Heißt eigentlich so weil wenn das Gerät kalt ist irgendein Widerstand keinen Kontakt herstellen kann, während wenn du es vorher mit dem Heizlüfter anwärmst der Kontakt wieder hergestellt wird. Gibt es z.b. auch bei Fernseher. Da ist dann erst das Bild verschoben und wenn dann eine gewisse Temperatur erreicht ist hat sich alles normalisiert. Wo nun diese kalte Lötstelle ist kann ich dir natürlich nicht sagen. Es gibt aber irgendwo hier einen Link wo du mal nachfragen kannst wegen einer Reparatur. Kannst natürlich auch selber aufmachen und vorsichtig mit einem kleinen Schraubenzieher mit dem Griff auf die Widerstände klopfen um rauszufinden wo sie ist. Würde dir aber doch eine Reparatur vom Fachmann vorschlagen. Viel Glück Hoffe das ist es auch aber sonst hat ja anscheinend keiner ne Idee. Maddy Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Freekstyle Geschrieben 13. Dezember 2007 Autor Melden Share Geschrieben 13. Dezember 2007 Hallo, danke für deine Antwort. Wäre interessant zu wissen wo der Fehler liegt, auf dem Mainboard oder beim Netzteil. Am Netzteil löten und Elkos und Widerstände tauschen wäre kein Problem, aber am Mainboard traue ich mir das nicht zu. Vor allem weil es nicht meine Box ist. Danke. Gruß, Freekstyle Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Maddy 76 Geschrieben 13. Dezember 2007 Melden Share Geschrieben 13. Dezember 2007 Moin! Ich glaube nicht das du Widerstände tauschen mußt sondern evtl. nur die Lötstelle einmal kurz mit einem Lötkolben anwärmen damit wieder Kontakt da ist. Wie wäre es den wenn du es versuchst einzugrenzen. Z.b. mit einem Fön nur das Mainbord anwärmen und schaust ob er dann normal Bootet. Falls nicht das gleiche mit dem Netzteil. Mit dem leichtem klopfen eines Schraubenzieher (natürlich nicht leitend) kann man ja auch sehen wann er weitermacht mit dem Booten. Kann dir so aus der Entfernung natürlich auch nicht helfen. Falls du was gefunden hast kannst dich ja mal melden. Gruß Maddy Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.