mister_cardriver Geschrieben 6. Oktober 2007 Melden Share Geschrieben 6. Oktober 2007 Hallo, ich habe eine Philips dbox mit zwei Chipsätzen. Hab momentan das Image (keywelt_v1_september_beta10_2x_squashfs_2007) drauf. Jetzt mein Problem: Nachdem ich einige Zeit P*****e geschaut hab kommt ne Meldung Kanal zur Zeit nicht verfügbar. Danach bekomm ich auf jedem Sender diese Meldung auch FreeTV. Hab verschiedenste Avia Einstellungen und Tunertreiber probiert aber die Meldung kommt immer und immer wieder. Es hilft dann nur ein Reboot dann funzt das ganze wieder ne Zeit lang und dann kommt die Meldung wieder. Hab schon verschiedenste Images ausprobert. Ich kenn mich jetzt nicht so gut damit aus. Also wenn jemand Hilfe anbietet dann nicht mit Begriffen um sich werfen die total speziell sind, das wär echt nett. Ansonsten bin ich für Hilfe sehr dankbar, weil ich ziemlich am kotzen bin und das Ding bald fliegen lernt. Gruß M_C Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
mister_cardriver Geschrieben 6. Oktober 2007 Autor Melden Share Geschrieben 6. Oktober 2007 Hier auf Wunsch nochmal das Thema und das Bootlog, ich hoffe mir kann jetzt jemand helfen Hier mal das Bootlog dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS debug: BMon V1.0 mID 02 debug: feID 00 e debug: fpID 52 dsID debug: HWrev 01 FPrev 0.30 debug: B/Ex/Fl(MB) 32/00/08 dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/philips-dbox2/kernel/os in Flash-FS debug: Got Block #0040 will verify ELF image, start= 0x800000, size= 162920 verify sig: 262 Branching to 0x40000 U-Boot 1.2.0 (Tuxbox) (Sep 29 2007 - 20:39:30) CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Philips, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 694089 bytes loaded to 0x100000 ............................................................... done Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 694025 Bytes = 677.8 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.34-dbox2 (image@Server) (gcc version 3.4.4) #7 Sa Sep 29 20:40 :02 CEST 2007 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs Decrementer Frequency = 247500000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x2000) Console: colour dummy device 80x25 Calibrating delay loop... 65.74 BogoMIPS Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. squashfs: version 3.0 (2006/03/15) Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2a:f7:bd loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "FLFS (U-Boot)" 0x00040000-0x005c0000 : "root (squashfs)" 0x005c0000-0x00800000 : "var (jffs2)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.2.1 (2007.09.29-18:44+0000) multi-call ##### Image-Version: Keywelt_Sep2007_V1_beta10 ##### event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Philips Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av: AVIA500 sptsfix is on avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... eNX avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 o avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ info, udhcpc (v1.2.1) started DVB: registering frontend 0:0 (TDA8044H QPSK De avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ debug, Sending discover... avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ Thu Jan 1 01:00:00 CET 1970 debug, Sending select for 192.168.178.23... info, Lease of 192.168.178.23 obtained, lease time 864000 Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.247 2007/08/ 08 22:17:06 dbt Exp $ [sectionsd] Caching max 6000 events [sectionsd] Caching 14 days [sectionsd] Caching 6 hours Extended Text [sectionsd] Events are old 60min after their end time /var/tuxbox/config/zapit/epgfilter.xml: No such file or directory /var/tuxbox/config/mybouquets.xml: No such file or directory /var/plugins/operations camd_init /var/plugins/operations cardserver_start $Id: zapit.cpp,v 1.403 2007/09/01 04:32:26 Kroki & Worschter & SnowHead Exp $ [zapit] MAX_SOCKETS=3 [frontend] uncommitted_switch_mode 0 /var/plugins/operations camd_start DBox2 Multicam Driver v1.01 skars & doz21 smile.gif starte camd3 /var/plugins/operations check_ca 01.01.1970 00:00:15 camd3: BOXTYPE: dbox2 01.01.1970 00:00:15 camd3: LOG: 6 01.01.1970 00:00:15 camd3: UDP_PORT: 20248 01.01.1970 00:00:15 camd3: original slot au on 01.01.1970 00:00:15 camd3: HTTP_PORT: 9080 01.01.1970 00:00:15 camd3: LOG_HOST: 127.0.0.1:514 01.01.1970 00:00:15 camd3: DNS_CACHE: 60 sec 01.01.1970 00:00:15 camd3: camd3.map not found 01.01.1970 00:00:15 camd3: camd3.ignore not found 01.01.1970 00:00:15 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all 01.01.1970 00:00:15 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=a ny SERVICES=1702:000000:0008,1722:000000:0008, 01.01.1970 00:00:15 camd3: UserDB(update): USER=benutzer110 PASS=password10 FRO M=any SERVICES=1702:000000:0008,1722:000000:0008, 01.01.1970 00:00:16 camd3: original slot: CAID=1702 01.01.1970 00:00:25 camd3: KeyDB: started 01.01.1970 00:00:25 camd3: HTTP: started on port 9080 01.01.1970 00:00:25 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere ... 01.01.1970 00:00:25 camd3: Slot /dev/tts/1: starte Monitor... 01.01.1970 00:00:25 camd3: slot /dev/tts/1: ready 01.01.1970 00:00:25 camd3: camd v3.894 beta1 - erfolgreich gestartet [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $ [controld] Boxtype detected: (2, Philips D-BOX2) [controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1 SET VSW: 0 1 SET VSW: 1 1 SET VSW: 2 1 [yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0) [LCDFONT] initializing core...[sectionsd] getUTC: read: Connection timed out [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_re neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [neutrino] received 43 sats [neutrino] registering as event client [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything PES, queue 0 normal. 01.01.1970 00:01:06 camd3: start ecm pid 1972 caid 1830 ident 000000 01.01.1970 00:01:06 camd3: start ecm pid 100e caid 1702 ident 000000 01.01.1970 00:01:06 camd3: start ecm pid 1672 caid 1801 ident 000000 [CBasicClient] connect 01.01.1970 00:01:06 camd3: CMD 02 -> 1830:003501:000E:1972 from 127.0.0.1 ( camd 3 ) /tmp/camd.sock01: No such file or directory 01.01.1970 00:01:06 camd3: CMD 02 -> 1702:000000:000E:100E from 127.0.0.1 ( camd 3 ) [CBasicClient] connect failed. /tmp/camd.sock02: No such file or directory 01.01.1970 00:01:06 camd3: start emm pid 1004 caid 1831 ident 000000 01.01.1970 00:01:07 camd3: start emm pid 1001 caid 1801 ident 000000 01.01.1970 00:01:07 camd3: start emm pid 1003 caid 1830 ident 000000 01.01.1970 00:01:07 camd3: CMD 02 -> 1801:000501:000E:1672 from 127.0.0.1 ( camd 3 ) 01.01.1970 00:01:07 camd3: CMD 02 -> 1702:000000:000E:100E 0.248s from 127.0.0.1 ( camd3 ) decoded on emu 01.01.1970 00:01:07 camd3: CMD 02 -> 1801:000501:000E:1672 0.817s from 127.0.0.1 ( camd3 ) decoded on emu [controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3) Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Muticar Geschrieben 6. Oktober 2007 Melden Share Geschrieben 6. Oktober 2007 schiebt das bitte mal ein Mod ins richtige Forum ? Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Silent-Tears Geschrieben 6. Oktober 2007 Melden Share Geschrieben 6. Oktober 2007 Doppelpost: klick Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
mister_cardriver Geschrieben 6. Oktober 2007 Autor Melden Share Geschrieben 6. Oktober 2007 du hast gesagt ich solls in den full member bereich Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Silent-Tears Geschrieben 6. Oktober 2007 Melden Share Geschrieben 6. Oktober 2007 Ja, aber bitte doch ins richtige Forum. Aber nun gut, ich hoffe, ein Mod schiebt das mal entsprechend. Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.