Gast Mr. AT Geschrieben 26. März 2003 Melden Share Geschrieben 26. März 2003 Mahlzeit habe da mal ein problemchen mit meiner Box. Bis vor kurzem lief sie noch einwandfrei. Nachdem ich ihr nun einmal murz den Strom genommen habe, bleibt sie immer kurz bevor sie fertig gebootet hat stehen. Ich habe nun schon einparmal das Image neu geflashed, und auch schon das AlexW Base Image probiert. Beim AlexW aktzeptiert er nicht einmal das cdk.cramfs da sagt er dann des die Checksumme nicht übereinstimmt Ich habe ja die befürchtung des was mit dem Speicher ist. Naja, hier ist mal der Log vom Booten. dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0044 will verify ELF image, start= 0x800000, size= 200660 verify sig: 262 Branching to 0x40000 PPCBoot 1.1.6 (TuxBox) (Nov 16 2002 - 10:23:37) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Watchdog enabled Board: DBOX2, Nokia I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ........ done. LCD: ready FB: loading - ready In: serial Out: serial Err: serial Options: 1: framebuffer on ttyS0 2: framebuffer on fb0 3: framebuffer on null Select option (1-3), other keys to stop autoboot: 0 ............................................................... Un-Protected 63 sectors ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load compleate: 647481 bytes loaded to 0x100000 ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 647417 Bytes = 632 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.19 (genial) #12 Sam Nov 16 19:45:12 CET 2002 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock/2 rw console=ttyS0 Decrementer Frequency = 252000000/60 mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000) Console: colour dummy device 80x25 Calibrating delay loop... 66.76 BogoMIPS Memory: 30820k available (1136k kernel code, 344k data, 68k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. © 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module CPM UART driver version 0.03 ttyS00 at 0x0280 is a SMC ttyS01 at 0x0380 is a SMC pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:1b:31:68 D-Box 2 flash driver (size->0x800000 mem->0x10000000) Using word write method Creating 5 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00040000 : "ppcboot (flfs)" 0x00040000-0x00800000 : "root (jffs2)" 0x00020000-0x00800000 : "flash without bootloader" 0x00000000-0x00800000 : "complete flash" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 68k init init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu les/2.4.19/misc/i2c-8xx.o [i2c-8xx]: mpc 8xx i2c init i2c-core.o: adapter registered as adapter 0. [i2c-8xx]: adapter: 0 Using /lib/modules/2.4.19/misc/info.o i2c-core.o: driver FOR_PROBE_ONLY registered. i2c-core.o: driver unregistered: FOR_PROBE_ONLY Using /lib/modules/2.4.19/kernel/drivers/input/input.o Using /lib/modules/2.4.19/kernel/drivers/input/evdev.o Using /lib/modules/2.4.19/misc/event.o event: init ... Using /lib/modules/2.4.19/misc/saa7126.o i2c-core.o: driver i2c saa7126 driver registered. i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0). Using /lib/modules/2.4.19/misc/avs.o i2c-core.o: driver i2c audio/video switch driver registered. i2c-core.o: client [CXA2092] registered to adapter [](pos. 1). Using /lib/modules/2.4.19/misc/fp.o i2c-core.o: driver DBox2 Frontprocessor driver registered. i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2 ). fp.o: clear_wakeup_timer [40][30] Using /lib/modules/2.4.19/misc/dvb_demux.o Using /lib/modules/2.4.19/misc/dvbdev.o Using /lib/modules/2.4.19/misc/avia.o Using /lib/modules/2.4.19/misc/dmxdev.o Using /lib/modules/2.4.19/misc/cam.o AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $ der moment ist gekommen... Using /lib/modules/2.4.19/misc/dvb_frontend.o i2c-core.o: driver DBox2-CAM registered. CAM: attaching CAM at 0x6e i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3). CAM: attached to adapter Using /lib/modules/2.4.19/misc/lcd.o lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface on 1 write 1 event's ... initializing core... adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) Intializing font cache... Using /lib/modules/2.4.19/misc/avia_gt.o avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: autodetecting chip type... AViA GTX found avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.134 2002/09/21 00:00:08 Jolt Exp $ avia_gt_dmx: Successfully loaded ucode V0.14 avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning... avia_gt_core: masking unhandled irq reg 0 bit 6 avia_gt_gv: $Id: avia_gt_gv.c,v 1.25 2002/10/11 09:57:54 Jolt Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $ avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $ avia_gt_core: Loaded AViA eNX/GTX driver Using /lib/modules/2.4.19/misc/dvb.o Using /lib/modules/2.4.19/misc/dvb.o insmod: A module named dvb already exists Init VES1820 Using /lib/modules/2.4.19/misc/ves1820.o $Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $ i2c-core.o: driver VES1820 DVB-C Demodulator registered. VES1820: attaching VES1820 at 0x10 i2c-core.o: client [VES1820] registered to adapter [](pos. 4). VES1820: attached to adapter Using /lib/modules/2.4.19/misc/avia_gt_napi.o avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $ avia_gt_napi: hardware section filtering enabled. Using /lib/modules/2.4.19/misc/avia_gt_vbi.o avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $ avia_gt_vbi: got demux C-Cube - AViA eNX/GTX Using /lib/modules/2.4.19/misc/avia_gt_fb.o avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device Using /lib/modules/2.4.19/misc/avia_gt_proc.o avia_gt_proc: $Id: avia_gt_proc.c,v 0.7 2002/10/12 13:38:30 NoClue $ CXA2092 found CXA2092 found [CBasicClient] connect failed. /tmp/sectionsd.sock: No such file or directory $Id: sectionsd.cpp,v 1.139 2002/10/15 20:39:47 woglinde Exp $ caching 72 hours events are old 60min after their end time Oops: kernel access of bad area, sig: 11 NIP: C002B094 XER: 00000000 LR: C002B060 SP: C1B79D00 REGS: c1b79c50 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0003B41D, DSISR: 00018128 TASK = c1b78000[64] 'sectionsd' Last syscall: 2 last math 00000000 last altivec 00000000 GPR00: 00000000 C1B79D00 C1B78000 00000001 00009032 0FE75000 00003000 C0160000 GPR08: 0003B355 C013A898 00000000 000000C8 C0016898 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 C0163590 C0163590 C013A910 GPR24: C018E024 C01D2E34 00000643 0000190C C013A8A4 C013A884 FFFFFFFE C01D2E60 Call backtrace: C002B33C C002BD30 C002C460 C001E08C C001FD10 C001E368 C0021514 C000F4EC C00148D0 C0019198 C0008720 C00045C8 0FE758E0 0FDCE4A8 0FDC75D4 00000000 Oops: kernel access of bad area, sig: 11 NIP: C002B094 XER: 00000000 LR: C002B060 SP: C1CC5E80 REGS: c1cc5dd0 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0003B42D, DSISR: 00018128 TASK = c1cc4000[57] 'start_neutrino' Last syscall: 114 last math 00000000 last altivec 00000000 GPR00: 00001749 C1CC5E80 C1CC4000 00000001 00009032 00000000 00000000 00000000 GPR08: 0003B355 C013A890 00000023 000000D8 0000000D 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 C0163590 C0163590 C013A910 GPR24: C018E024 C0163590 000006DE 00001B78 C013A8A4 C013A884 FFFFFFFE C01D98C4 Call backtrace: 00001032 C002BD30 C002BD74 C0013EE0 C0014EE4 C000435C 1002886C 1002A080 1002A0B4 1002A044 100248A0 10024C40 1002ABC0 1002A924 10003C84 10003890 0FEF35D0 00000000 Oops: kernel access of bad area, sig: 11 NIP: C002B094 XER: 00000000 LR: C002B060 SP: C1DFDE80 REGS: c1dfddd0 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0003B439, DSISR: 00018128 TASK = c1dfc000[10] 'rcS' Last syscall: 114 last math 00000000 last altivec 00000000 GPR00: 00001762 C1DFDE80 C1DFC000 00000001 00009032 00000000 000001EA 00000000 GPR08: 0003B355 C013A890 0000008E 000000E4 0000000D 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 C0163590 C0163590 C013A910 GPR24: C018E024 C0163590 00000731 00001CC4 C013A8A4 C013A884 FFFFFFFE C01DD1D4 Call backtrace: 00001032 C002BD30 C002BD74 C0013EE0 C0014EE4 C000435C 1002886C 1002A080 1002A0B4 1002A044 100248A0 10024C40 10024C38 10024C38 10024BB8 10024C38 1002ABC0 1002A924 10003C84 10003890 0FEF35D0 00000000 Oops: kernel access of bad area, sig: 11 NIP: C002B094 XER: 00000000 LR: C002B060 SP: C1DFDB60 REGS: c1dfdab0 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0003B441, DSISR: 00018128 TASK = c1dfc000[10] 'rcS' Last syscall: 114 last math 00000000 last altivec 00000000 GPR00: 00000000 C1DFDB60 C1DFC000 00000001 00009032 0FF8F000 00012000 C0160000 GPR08: 0003B355 C01E0748 00000000 000000EC 0000000D 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00001032 C0163590 C0163590 C013A910 GPR24: C018E024 C01E05BC 0000077C 00001DF2 C013A8A4 C013A884 FFFFFFFE C01E05E8 Call backtrace: C002B33C C002BD30 C002C460 C001E08C C001FD10 C001E368 C0021514 C000F4EC C00148D0 C0004720 C000B8F8 C000B6A4 C0004594 00001032 C002BD30 C002BD74 C0013EE0 C0014EE4 C000435C 1002886C 1002A080 1002A0B4 1002A044 100248A0 10024C40 10024C38 10024C38 10024BB8 10024C38 1002ABC0 1002A924 10003C84 10003890 Oops: kernel access of bad area, sig: 11 NIP: C002B094 XER: 00000000 LR: C002B060 SP: C1E0BE80 REGS: c1e0bdd0 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0003B441, DSISR: 00018128 TASK = c1e0a000[9] 'init' Last syscall: 114 last math 00000000 last altivec 00000000 GPR00: 00001769 C1E0BE80 C1E0A000 00000001 00009032 00000000 00001371 00000000 GPR08: 0003B355 C013A890 000007A0 000000EC 0000000D 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00009032 C0163590 C0163590 C013A910 GPR24: C018E024 C0163590 0000077F 00001DFC C013A8A4 C013A884 FFFFFFFE C01E0774 Call backtrace: 00001032 C002BD30 C002BD74 C0013EE0 C0014EE4 C000435C 1A111316 10014554 10014818 10014914 100153E0 10003C84 10003890 0FEF35D0 00000000 Oops: kernel access of bad area, sig: 11 NIP: C002B094 XER: 00000000 LR: C002B060 SP: C1E0BB60 REGS: c1e0bab0 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0003B441, DSISR: 00018128 TASK = c1e0a000[9] 'init' Last syscall: 114 last math 00000000 last altivec 00000000 GPR00: 00000000 C1E0BB60 C1E0A000 00000001 00009032 7FFFE000 00002000 C0160000 GPR08: 0003B355 C013A898 00000000 000000EC 0000000D 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00001032 C0163590 C0163590 C013A910 GPR24: C018E024 C01E0698 0000077D 00001DF6 C013A8A4 C013A884 FFFFFFFE C01E066C Call backtrace: C002B33C C002BD30 C002C460 C001E08C C001FD10 C001E368 C0021514 C000F4EC C00148D0 C0004720 C000B8F8 C000B6A4 C0004594 00001032 C002BD30 C002BD74 C0013EE0 C0014EE4 C000435C Oops: kernel access of bad area, sig: 11 NIP: C0019808 XER: 00000000 LR: C0019914 SP: C1E0B8C0 REGS: c1e0b810 TRAP: 0300 Not tainted MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 0480F2F0, DSISR: 00000963 TASK = c1e0a000[9] 'init' Last syscall: 114 last math 00000000 last altivec 00000000 GPR00: 00000001 C1E0B8C0 C1E0A000 0480F2F0 00001032 C1AF83A0 C1F2DBE4 C1904000 GPR08: 00000000 C190E090 42F01260 00000000 44002024 1003C2B8 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00001032 01E0BAA0 00000000 C0004594 GPR24: 00000000 00030001 00000001 00000001 C1AF83A0 00000001 C015A1E8 C0160000 Naja, und das zum schluß wiederholt sich ständig!!! MfG, Mr. AT Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge