felix2k6 Geschrieben 28. Februar 2007 Melden Share Geschrieben 28. Februar 2007 debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.2 mID 01 debug: feID dd gtxID 0b debug: fpID 5a dsID 0xxx debug: HWrev 09 FPrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x800000, size= 155204 verify sig: 262 Branching to 0x40000 U-Boot 1.1.4 (Tuxbox) (Aug 31 2006 - 20:09:02) CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache Board: DBOX2, Nokia, BMon V1.2 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: .... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 696900 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 696836 Bytes = 680.5 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #1 Do Aug 31 20:09: 34 CEST 2006 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Decrementer Frequency = 252000000/60 m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1) m8xx_wdt: keep-alive trigger installed (PITC: 0x1000) Console: colour dummy device 80x25 Calibrating delay loop... 66.96 BogoMIPS Memory: 30776k available (1184k kernel code, 348k data, 60k init, 0k highmem) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (NAND) © 2001-2003 Red Hat, Inc. Squashfs 2.2-r2 (released 2005/09/08) © 2002-2005 Phillip Lougher i2c-core.o: i2c core module version 2.6.1 (20010830) i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830) CPM UART driver version 0.04 ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2 pty: 256 Unix98 ptys configured eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:94:ba loop: loaded (max 8 devices) D-Box 2 flash driver (size->0x800000 mem->0x10000000) D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank Intel/Sharp Extended Query Table at 0x0035 cfi_cmdset_0001: Erase suspend on write enabled Creating 6 MTD partitions on "D-Box 2 flash memory": 0x00000000-0x00020000 : "BR bootloader" 0x00020000-0x00540000 : "root (squashfs)" 0x00540000-0x007e0000 : "var (jffs2)" 0x007e0000-0x00800000 : "FLFS (U-Boot)" 0x00020000-0x00800000 : "Flash without bootloader" 0x00000000-0x00800000 : "Complete Flash" Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 4096) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 60k init init started: BusyBox v1.1.3 (2006.08.31-18:14+0000) multi-call mount: Mounting /dev/mtdblock/2 on /var failed: No such file or directory event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $ Detected STB: Vendor: Nokia Model: D-BOX2 [i2c-8xx]: mpc 8xx i2c init [i2c-8xx]: adapter: 0 $Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $ $Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $ DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600). dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter $Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $ avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $ avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $ avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ avia_gt_core: autodetecting chip type... GTX avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $ avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $ avia_gt_core: masking unhandled irq reg 1 bit 11 avia_gt_core: masking unhandled irq reg 1 bit 13 avia_gt_ucode: loaded ucode v0014 avia_gt_ucode: ucode section filters disabled. avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning... avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ avia_gt_gv: set_input_size (width=720, height=576) avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ avia_gt_pcm_set_rate(44100) avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $ avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $ avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $ avia_gt_core: Loaded AViA eNX/GTX driver avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $ avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) Console: switching to colour frame buffer device 82x32 avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device lcd.o: init lcd driver module lcd.o: found KS0713/SED153X lcd interface avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $ avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $ avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ avia_gt_pcm_set_rate(44100) avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $ DVB: registering frontend 0:0 (VES1893)... avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $ avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $ avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2005/12/11 22:30:00 Skars & Merandos Exp $ avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension options: (demux reinit) enx_reset=1 (framer chan.) fc_reset=1 (clr avia reg) avia=0 (enx td trace) trace=1 (lock, unlock) spinlock=0 Schreiben ueber /proc/bus/gtx (delay) delay=500 Starting the automounter Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx dboxide: $Id: main.c,v 1.9 2006/09/11 17:30:00 carjay Exp $ ide: late registration of driver. dboxide: activating cs2 dboxide: address space of DBox2 IDE CPLD is at: 0xc3bef000 Probing IDE interface ide0... hda: SAMSUNG SP0802N, ATA DISK drive ide0 at 0x010-0x017,0x04e on irq 47 hda: attached ide-disk driver. hda: host protected area => 1 $Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $ [sectionsd] Caching max 3000 events [sectionsd] Caching 14 days [sectionsd] Events are old 60min after their end time /var/plugins/operations logcs_init /var/plugins/operations camd_init $Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 Kroki & Worschter Exp $ [zapit] MAX_SOCKETS=3 [zapit] PMT update enabled /var/plugins/operations cardserver_start hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=9733/255/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 /dev/ide/host0/bus0/target0/lun0/disc: setting drive write-caching to 0 (off) setting standby to 60 /var/plugins/operations camd_start 5 minutes + 0 seconds) starte mgcamd tuxbox mgcamd v1.20 by mixvt (compiled Feb 13 2007 22:33:13) [mg] Net:4:7:1:10s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:3 Cache:7 Log:2:1 72.16.1.1:28007 Reread:0 [mg] Ecm cache time: 15 Box type: dbox2 Conax.Key error 2: No such file or directory Keys readed Conax.Key error 2: No such file or directory [mgcam] emm thread started [getservices] /var/tuxbox/config/zapit/myservices.xml found. [getservices] dup transponder id 3 onid 85 [getservices] dup transponder id 11 onid 85 [getservices] dup transponder id 2 onid 85 [getservices] dup transponder id 4 onid 85 [getservices] dup transponder id 1 onid 85 /tmp/currentservices.xml: No such file or directory $Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $ [controld] Boxtype detected: (1, Nokia D-BOX2) [controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1 [controld] setting VideoFormat to auto [yhttpd] Webserver nhttpd/3.1.0 (yhttpd_core/1.2.0) [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular) [LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold) [LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular) [LCDFONT] Intializing font cache... [sectionsd] getUTC: read: Connection timed out [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [yhttpd] Webserver starting... /var/plugins/operations epg_reinit neutrino: /lib/libpng12.so.0: no version information available (required by neut rino) [neutrino] frameBuffer Instance created 812k video mem avia_gt_gv: set_input_mode (mode=2) avia_gt_gv: set_input_size (width=720, height=576) [neutrino] Software update enabled [neutrino] enable flash [lcdd] time-skin not found -> using default... [lcdd] weekday-skin not found -> using default... [lcdd] date-skin not found -> using default... [lcdd] month-skin not found -> using default... [LCDFONT] initializing core... [LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular) [LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold) [LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold) [LCDFONT] Intializing font cache... [LCDFONT] FTC_Face_Requester (Fix15/Bold) [LCDFONT] FTC_Face_Requester (Fix14/Bold) /dev/input/event1: No such file or directory [neutrino] menue setup [controld] setting VideoFormat to auto [neutrino] received 33 sats [neutrino] registering as event client [controld] setting VideoFormat to auto [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [basicsocket] send_data: Resource temporarily unavailable [neutrino] initialized everything zap failed! [sectionsd] getUTC: read: Connection timed out Felix PS: Kanal zur Zeit nicht verfügbar Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
felix2k6 Geschrieben 28. Februar 2007 Autor Melden Share Geschrieben 28. Februar 2007 funzelt wieder....naja...aber im moment erstmal ohne hdd Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Empfohlene Beiträge
Archiviert
Dieses Thema ist jetzt archiviert und für weitere Antworten gesperrt.