-
Gesamte Inhalte
4.033 -
Benutzer seit
-
Letzter Besuch
-
Tagessiege
84
Inhaltstyp
Profile
Forum
Kalender
Downloads
Blogs
Galerie
Articles
Beiträge erstellt von rolu2
-
-
und wenn das nun nicht funktionieren würde? Free to air aufnahmen funktionieren vom feinsten, wiedergabe mit vlc auch.das bild bei verschlüsselten geht weg, ich höre nur noch knacken und die aufnahme bricht nach wenigen sekunden mit folgendem Log abgebrochen:
26.03.08 - 20:15:35 - FEHLER!! Unerwarteter Abbruch des Grab-Programms !
26.03.08 - 20:15:35 - INFO - Aufnahme wird NICHT fortgesetzt!
26.03.08 - 20:15:40 - ACHTUNG - Verzeichnis konnte nicht erstellt werden. Ausgabe erfolgt ins Verzeichnis ...ERR001
dann poste doch mal bitte deine einstellungen von dbox winserver und deiner dbox.
-
Danke für die Anleitung
aber bei mir hat die ts Datei immer 0KB habe alles eingestellt wie beschrieben
was mache ich falsch
Danke
ein bißchen mehr info wäre nicht schlecht.
-
Ich werde den SPTS-Modus in der Box mal deaktivieren. Vielleicht "beisst" sich das ja irgendwie mit der
TS-Einstellung im D-Box WinServer unter UDRec
SPTS-Modus steht bei mir auf "ein". nehme auch mit UDRec und in TS auf ohne Prob.
Ja, ac3 habe ich aktiviert, da ich gerne auch alle Tonspuren mit aufnehmen möchte.schalte das mal doch aus und aktiviere mal nur standard tonspur aufnehmen.
du hast doch bei UDRec (Audio) schon bestimmt angegeben das er alle bekannten streams aufnehmen soll.das könnte dein problem vielleicht lösen.
so funzelt es bei mir auf jedem fall ohne prob
-
hier einmal meine werte.
habe ich mehrmals verbessert mit der hilfe durch @merkwuerden. besten dank an ihn.
windows xp pro, sp2 Athlon XP 2000+ 1,5 gb RAM Netzwerkarte on Board 100 Mbit Half Duplex Switsch: TP-Link(TL-SF1008D) 8-Ports Dbox2 Phillips Februarimage V2.1 und Hanewin(Version 1.1.56) nfs blockgrösse auf 32768 /var # /tmp/netz3 125.123.8.2 Mounteinstellungen: rsize 8192 wsize 8192 Dateigroesse 67108864 Bytes 8192+0 records in 8192+0 records out real 1m 8.11s user 0m 0.28s sys 0m 11.87s 7598 kbits/s Schreiben 8192+0 records in 8192+0 records out real 1m 10.96s user 0m 0.31s sys 0m 8.78s 7384 kbits/s Lesen 125.123.8.2:/aufnahme on /mnt/custom type nfs (rw,v3,rsize=8192,wsize=8192,soft, udp,nolock,addr=125.123.8.2) Mounteinstellungen: rsize 16384 wsize 16384 Dateigroesse 67108864 Bytes 8192+0 records in 8192+0 records out real 1m 2.04s user 0m 0.30s sys 0m 11.68s 8456 kbits/s Schreiben 8192+0 records in 8192+0 records out real 1m 6.30s user 0m 0.18s sys 0m 10.54s 7825 kbits/s Lesen 125.123.8.2:/aufnahme on /mnt/custom type nfs (rw,v3,rsize=16384,wsize=16384,sof t,udp,nolock,addr=125.123.8.2) Mounteinstellungen: rsize 32768 wsize 32768 Dateigroesse 67108864 Bytes 8192+0 records in 8192+0 records out real 1m 0.35s user 0m 0.37s sys 0m 13.82s 8594 kbits/s Schreiben 8192+0 records in 8192+0 records out real 1m 7.18s user 0m 0.28s sys 0m 9.22s 7825 kbits/s Lesen 125.123.8.2:/aufnahme on /mnt/custom type nfs (rw,v3,rsize=32768,wsize=32768,sof t,udp,nolock,addr=125.123.8.2)
sollten für mich reichen
-
So, nachdem ich nun 25 Seiten gelesen habe, konnte ich zu meinem Problem nichts finden.
Also.... im Prinzip klappt es bei mir auch, mit dem WinDBoxServer aufzunehmen, aber:
Wenn ich einen PW-Kanal aufnehmen möchte und die Aufnahme beginnt, knackt es kurz in der Box, das Bild wird schwarz und der Ton ist weg.
Hat jemand eine Idee, woran es liegen könnte ?
Gruß
ullisan
stell man unter "einstellungen/aufnahme---playback anhalten auf aus.
bei windboxserver kann kan auch mal einen hacken bei der netztwerkkarte im menue standby machen.
hat bei mir bei einigen imageversionen geholfen
-
Ich habe es jetzt auch eingestellt bekommen und habe das gleiche Problem mit dem Ton!!!
hey
ihr könnt doch über die grüne taste wenn der film läuft den ton mit bild synchronisieren
-
@SnowHead
habe gerade versucht timecont0.03 auf das November.Image zu spielen.
Bin deiner Anleitung gefolgt. Die Box startet danach nicht mehr.
Wenn ich meine Start_Neutrino vergleiche mit der von Johann001 sieht die ganz anderns aus.
#!/bin/sh
# KW_STARTNEUTRINO_001
if [ -e /var/etc/.rdate ]; then
rdate time.fu-berlin.de
fi
if [ -e /var/etc/.dimmer ]; then
( sleep 20; dimmer ) &
fi
if [ -e /var/etc/.logomask ]; then
( sleep 20; logomask ) &
fi
if [ -e /var/etc/.clock ]; then
( sleep 20 ; clock ) &
fi
if [ -e /proc/clock ]; then
sectionsd -tc
else
sectionsd
fi
timerd
[ -e /var/etc/.tuxcald ] && tuxcald &
/var/plugins/operations camd_init &
if [ -e /var/etc/.pmt_update ] ; then
zapit -u
else
zapit
fi;
controld
if [ -e /var/bin/nhttpd ]; then
/var/bin/nhttpd
else
/bin/nhttpd
fi
/var/plugins/operations sect_renice &
/var/plugins/operations epg_reinit &
if [ -e /var/plugins/woltimer/.wol_auto ] ; then
sleep 40 && /var/plugins/woltimer/woltimerd &
fi;
[ -e /var/etc/.use_avia_gt_proc -a -e /var/etc/.aviacheck ] && /var/sbin/aviacheck &
if [ -e /var/etc/.lcd_epg_auto ] ; then
sleep 30 && /var/plugins/lcd_epg.sh &
fi;
KEEP_ALIVE=1
while expr $KEEP_ALIVE != 0 > /dev/null
do
neutrino -u -f
KEEP_ALIVE=$?
done
pzapit -kill
[ ! -e /tmp/.config_stop ] && /var/plugins/operations camd_exit &
[ -e /tmp/tuxmaild.pid ] && kill -term $( cat /tmp/tuxmaild.pid )
i=50
while expr $i != 0 > /dev/null
do
if [ ! -e /tmp/.config_stop ] && pidof controld > /dev/null; then echo "Waiting for controld (max. $i seconds)"
elif pidof timerd > /dev/null; then echo "Waiting for timerd (max. $i seconds)"
elif pidof zapit > /dev/null; then echo "Waiting for zapit (max. $i seconds)"
elif pidof tuxmaild > /dev/null; then echo "Waiting for tuxmaild (max. $i seconds)"
else break;
fi
i=`expr $i - 1`
sleep 1
done
if [ -e /tmp/.config_stop ]; then
if pidof zapit > /dev/null; then
killall -9 zapit
fi
i=1
while expr $i != 2 > /dev/null
do
msgbox title="Configs einspielen" msg="Bitte jetzt Config-Dateien einspielen" select="moment,reboot" timeout=999 size=32
i=$?
killall -9 msgbox
done
/var/plugins/operations ex_kill
reboot
exit 0
fi
if [ -e /tmp/.reboot ] ; then
reboot
else
halt
fi
Wo schreibe ich den den Befehl genau hin?
Das gleich Problem habe ich glaub ich auch mit der rsC.
#!/bin/sh
# KW_RCS_001
# KEYWELT_SQUASHFS
# Pfade setzen
### export PATH=/var/bin:/sbin:/bin:/var/sbin:/var/plugins
echo;echo;echo "##### Image-Version: `sed -n 's/^imagename=//p' /.version` #####";echo
# Pfad zu insmod und den Modules festlegen
export IM="/sbin/insmod"
export MD="/lib/modules/"$(uname -r)"/misc"
/bin/date -s 112716542007
# Zeitformat setzen
. /etc/profile
if [ -e /var/etc/.start_mmc ]; then
if [ -e /var/etc/.mmc1 ]; then
/var/etc/init.d/start_mmc mmc1
elif [ -e /var/etc/.mmc2 ]; then
/var/etc/init.d/start_mmc mmc2
else
/var/etc/init.d/start_mmccombo
fi
fi
if [ -e /var/etc/.start_ide ]; then
/var/etc/init.d/init_ide &
sleep 4
i=15
while expr $i != 0 > /dev/null; do
if ! pidof init_ide > /dev/null; then
echo "'init_ide' fertig"
break
fi
i=`expr $i - 1`
echo "warte auf 'init_ide'"
sleep 2
done
fi
# Den Hostnamen (dbox) festlegen
hostname -F /etc/hostname
# ucodes verlinken falls diese fehlen
cd /var/tuxbox/ucodes/
if [ ! -e /var/tuxbox/ucodes/avia500.ux ]; then
touch /var/etc/.A500dummy
rm /var/etc/.A500*
touch /var/etc/.A500V110
ln -s /share/tuxbox/ucodes/avia500.110 avia500.ux
fi
if [ ! -e /var/tuxbox/ucodes/avia600.ux ]; then
touch /var/etc/.A600dummy
rm /var/etc/.A600*
touch /var/etc/.A600VB022
ln -s /share/tuxbox/ucodes/avia600.022 avia600.ux
fi
if [ ! -e /var/tuxbox/ucodes/cam-alpha.bin ]; then
touch /var/etc/.camalphadummy
rm /var/etc/.camalpha*
touch /var/etc/.camalphas
ln -s cams.bin cam-alpha.bin
fi
# Module laden
$IM $MD/event.o
$IM $MD/tuxbox.o
# Daten ueber die Box einlesen
VENDOR=`/bin/tuxinfo -V`
VENDOR_ID=`/bin/tuxinfo -v`
MODEL=`/bin/tuxinfo -M`
MODEL_ID=`/bin/tuxinfo -m`
SUBMODEL=`/bin/tuxinfo -S`
SUBMODEL_ID=`/bin/tuxinfo -s`
# Und ausgeben
echo "Detected STB:"
echo " Vendor: $VENDOR"
echo " Model: $MODEL $SUBMODEL"
# Image laeuft nur auf D-BOX2
if [ ! $MODEL_ID -eq 1 ]; then
halt
fi
# DVB core
if [ -e /var/etc/.scamset ]; then
if [ -e /var/modules/dvb-core.o ]; then
$IM -f /var/modules/dvb-core.o dvb_shutdown_timeout=0
else
$IM -f $MD/dvb-core.o dvb_shutdown_timeout=0
fi
else
$IM -f $MD/dvb-core.o dvb_shutdown_timeout=0
fi
# I2C core
$IM $MD/dbox2_i2c.o
# Frontprozessor
$IM $MD/dbox2_fp.o
if [ -e /var/etc/.oldrc ]; then
$IM -f $MD/dbox2_fp_input.o disable_new_rc=1
elif [ -e /var/etc/.newrc ]; then
$IM -f $MD/dbox2_fp_input.o disable_old_rc=1
elif [ -e /var/etc/.rc_philips ]; then
$IM -f $MD/dbox2_fp_input.o philips_rc_patch=1
else
$IM -f $MD/dbox2_fp_input.o
fi
# Misc IO
$IM $MD/avs.o
$IM $MD/saa7126.o
# CAM laden
if [ $VENDOR_ID -eq 2 ]; then
# Philips
insmod cam mio=0xC040000 firmware=/var/tuxbox/ucodes/cam-alpha.bin
else
# Andere
insmod cam mio=0xC000000 firmware=/var/tuxbox/ucodes/cam-alpha.bin
fi
# Weitere Module
$IM $MD/dvb_i2c_bridge.o
$IM $MD/avia_napi.o
$IM $MD/cam_napi.o
$IM $MD/dbox2_fp_napi.o
# KEYWELT Pre-Configuration
if [ -e /var/etc/.firstconf ]; then
echo
echo "KEYWELT Pre-Configuration"
echo
if [ $VENDOR_ID -eq 1 ]; then
#Nokia
touch /var/etc/.hw_sections
[ -e /var/etc/.no_watchdog ] && rm /var/etc/.no_watchdog
touch /var/etc/.no_enxwatchdog
touch /var/etc/.pmt_update
elif [ $VENDOR_ID -eq 2 ]; then
# Philips
touch /var/etc/.hw_sections
[ -e /var/etc/.no_watchdog ] && rm /var/etc/.no_watchdog
[ -e /var/etc/.no_enxwatchdog ] && rm /var/etc/.no_enxwatchdog
touch /var/etc/.pmt_update
elif [ $VENDOR_ID -eq 3 ]; then
# Sagem
touch /var/etc/.hw_sections
[ -e /var/etc/.no_watchdog ] && rm /var/etc/.no_watchdog
[ -e /var/etc/.no_enxwatchdog ] && rm /var/etc/.no_enxwatchdog
touch /var/etc/.pmt_update
else
echo "Pre-Configuration failed"
fi
rm /var/etc/.firstconf
fi
# Weitere Module
# Zum abschalten des Watchdogs bei AVIA 500
AVOPT=""
if [ -e /var/etc/.no_watchdog ]; then
AVOPT="no_watchdog=1 "
fi
if [ -e /var/modules/avia_av_sptsfix.o -a -e /var/etc/.sptsfix ]; then
$IM -f /var/modules/avia_av_sptsfix.o firmware=/var/tuxbox/ucodes $AVOPT
echo "avia_av: AVIA500 sptsfix is on"
else
if [ -e /var/etc/.av_audiosync ]; then
AVOPT="${AVOPT}audio_sync=1 "
fi
if [ -e /var/modules/avia_av.o ]; then
$IM -f /var/modules/avia_av.o firmware=/var/tuxbox/ucodes $AVOPT
else
$IM -f $MD/avia_av.o firmware=/var/tuxbox/ucodes $AVOPT
fi
fi
# Bei Avia_gt hw_sections und nowatchdog abfragen
GTOPTS=""
if [ -e /var/etc/.hw_sections ]; then
GTOPTS="hw_sections=0 "
fi;
if [ -e /var/etc/.no_enxwatchdog ]; then
GTOPTS="${GTOPTS}no_watchdog=1 "
fi;
$IM -f $MD/avia_gt.o ucode=/var/tuxbox/ucodes/ucode.bin ${GTOPTS}
$IM $MD/avia_gt_fb.o console_transparent=0
$IM $MD/lcd.o
bmp_show /var/tuxbox/boot/logo-lcd2.bmp &
$IM $MD/avia_gt_lirc.o
$IM $MD/avia_gt_oss.o
$IM $MD/avia_gt_v4l2.o
# Netzwerk konfigurieren
if [ ! -e /etc/network/interfaces ] ; then
lcdip
ifup -a &
[ -e /var/etc/.rescue ] && /var/plugins/rescue/rescue
test -x /sbin/inetd && inetd
test -x /sbin/sshd && /etc/init.d/start_sshd &
else
ifup -a &
[ -e /var/etc/.rescue ] && /var/plugins/rescue/rescue
test -x /sbin/inetd && inetd
test -x /sbin/sshd && /etc/init.d/start_sshd &
fi
# Je nach Typ weitere Module laden
if [ $VENDOR_ID -eq 1 ]; then
#Nokia
if [ -e /var/etc/.nokia_old ]; then
$IM -f $MD/ves1820.old.o
else
$IM -f $MD/ves1820.o
fi
$IM -f $MD/ves1x93.o board_type=1
elif [ $VENDOR_ID -eq 2 ]; then
# Philips
if [ -e /var/etc/.tda80xx.o ]; then
$IM -f $MD/tda80xx.o
elif [ -e /var/etc/.tda8044h.old.o ]; then
$IM -f $MD/tda8044h.old.o
else
$IM -f $MD/tda8044h.o
fi
elif [ $VENDOR_ID -eq 3 ]; then
# Sagem
if [ -e /var/etc/.sagem_old ]; then
$IM -f $MD/at76c651.old.o
else
$IM -f $MD/at76c651.o
fi
$IM -f $MD/ves1x93.o board_type=2
else
echo "Hersteller unbekannt"
halt
fi
if [ -e /var/modules/avia_av_napi.o ]; then
$IM /var/modules/avia_av_napi.o
else
$IM $MD/avia_av_napi.o
fi;
$IM $MD/avia_gt_napi.o
$IM $MD/dvb2eth.o
$IM $MD/aviaEXT.o
[ -e /var/etc/.use_avia_gt_proc ] && $IM -f $MD/avia_gt_proc.o
# Image-Infos anzeigen
if [ ! -e /var/etc/.squashedi ]; then
if [ -e /var/etc/.boot_info ]; then
if [ -e /bin/cdkVcInfo ]; then
/bin/cdkVcInfo Neutrino &
fi;
fi
fi
if [ -e /var/etc/.rtc ]; then
$IM -f $MD/ds1307.o
sleep 1
/bin/hwrtc hwtosys
fi
# Telnet-Begruessung schreiben
echo "have fun with KEYWELT on your $VENDOR $MODEL - Kernel %r (%t)..." > /etc/issue.net
# compatibility links
ln -sf demux0 /dev/dvb/adapter0/demux1
ln -sf dvr0 /dev/dvb/adapter0/dvr1
ln -sf fb/0 /dev/fb0
ln -s /dev/dvb/adapter0 /dev/ost
ln -s /dev/dvb/adapter0 /dev/dvb/card0
if [ -e /var/etc/.squashedi ]; then
# setzt die Zeit die vor dem Reboot aktuell war
if [ -e /var/etc/.squashedi_time ]; then
/bin/date -s `cat /var/etc/.squashedi_time`
rm /var/etc/.squashedi_time
fi
# LAN-Swapfile bei Squash-Edi aktivieren
if [ -e /var/etc/.swapfile ]; then
if [ -x /var/etc/init.d/start_swapfile ]; then
/var/etc/init.d/start_swapfile
fi
fi
squashedi
rm /var/etc/.squashedi
reboot
fi
### Link Sicherung
[ ! -d /var/tuxbox/fonts ] && mkdir /var/tuxbox/fonts
cd /var/tuxbox/fonts/
[ ! -e /var/tuxbox/fonts/tuxtxt.otb ] && ln -s /share/fonts/tuxtxt_ro.otb tuxtxt.otb
[ ! -e /var/tuxbox/fonts/tuxtxt.ttf ] && ln -s /share/fonts/tuxtxt_ro.ttf tuxtxt.ttf
#[ ! -e /var/tuxbox/fonts/15B.pcf.gz ] && ln -s /share/fonts/15B_ro.pcf.gz 15B.pcf.gz
#[ ! -e /var/tuxbox/fonts/14B.pcf.gz ] && ln -s /share/fonts/14B_ro.pcf.gz 14B.pcf.gz
#[ ! -e /var/tuxbox/fonts/12.pcf.gz ] && ln -s /share/fonts/12_ro.pcf.gz 12.pcf.gz
[ ! -e /var/tuxbox/fonts/pakenham.ttf ] && ln -s /share/fonts/pakenham_ro.ttf pakenham.ttf
[ ! -e /var/tuxbox/fonts/bluehigh.ttf ] && ln -s /share/fonts/bluehigh_ro.ttf bluehigh.ttf
[ ! -e /var/tuxbox/fonts/bluebold.ttf ] && ln -s /share/fonts/bluebold_ro.ttf bluebold.ttf
[ ! -e /var/tuxbox/fonts/micron.ttf ] && ln -s /share/fonts/micron_ro.ttf micron.ttf
[ ! -e /var/tuxbox/fonts/micron_italic.ttf ] && ln -s /share/fonts/micron_italic_ro.ttf micron_italic.ttf
[ ! -e /var/tuxbox/fonts/micron_bold.ttf ] && ln -s /share/fonts/micron_bold_ro.ttf micron_bold.ttf
[ ! -e /var/tuxbox/fonts/unmrs.pfa ] && ln -s /share/fonts/unmrs_ro.pfa unmrs.pfa
if [ ! -e /var/tuxbox/config/neutrino/icons/radiomode.raw ]; then
mkdir -p /var/tuxbox/config/neutrino/icons
cd /var/tuxbox/config/neutrino/icons
ln -sf /share/tuxbox/neutrino/icons/radiomode_ro.pal radiomode.pal
ln -sf /share/tuxbox/neutrino/icons/radiomode_ro.raw radiomode.raw
fi
if [ -e /var/etc/.syslogd ]; then
/sbin/syslogd
fi
if [ -e /var/tuxbox/config/lirc/lircd.conf ]; then
/sbin/lircd /var/tuxbox/config/lirc/lircd.conf
fi;
if [ -e /var/etc/.automount ]; then
/var/etc/init.d/start_automount
else
$IM sunrpc
$IM lockd
[ ! -e /var/etc/.nonfs ] && $IM nfs
[ ! -e /var/etc/.nocifs ] && $IM cifs
#$IM lufs
fi
# LAN-Swapfile aktivieren
if [ -e /var/etc/.swapfile ]; then
if [ -x /var/etc/init.d/start_swapfile ]; then
/var/etc/init.d/start_swapfile
fi
fi
if [ -e /var/etc/.tuxmaild ]; then
tuxmaild &
fi
if [ -e /var/etc/.kb2rcd ]; then
if [ -x /bin/loadkeys ]; then
/bin/loadkeys /share/keymaps/i386/qwertz/de-latin1-nodeadkeys.kmap.gz
fi
kb2rcd &
fi
if [ -e /var/etc/init.d/rcS.local ]; then
/var/etc/init.d/rcS.local
fi
if [ -e /var/etc/.nfs_server ]; then
if [ -x /var/etc/init.d/start_nfsd ]; then
/var/etc/init.d/start_nfsd
fi
fi
if [ -e /var/etc/.samba_server ]; then
if [ -x /var/etc/init.d/start_samba ]; then
/var/etc/init.d/start_samba &
fi
fi
######
Wo genau hin mit dem Befehl.
Kenne mich mit Linux nicht so aus.
Wollte bei meiner tochter gern eine zeitbegrenzung reinpacken.
Würde mich um jede Hilfe freuen.
Schöne Weihnachszeit an alle.
Rolu2
Streaming Anleitung über "D-Box WinServer"
in Streaming
Geschrieben
glaube ich nicht.
du sollst doch nur schreiben wie du alles eingestellt hast. im programm und auf der box