Jump to content

falp

Full Member
 Profil anzeigen  Aktivitäten des Benutzers anzeigen

  • Gesamte Inhalte

    9

  • Benutzer seit

  • Tagessiege

    1

 Inhaltstyp 

Beiträge erstellt von falp

  1. CST TRINITY DUO Emergency Flash gesucht !

    in Allgemein

    Geschrieben

    Die I. Methode hat den Erfolg gebracht!

     

    Spoiler

    Bootlog:

    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.11 23:41:31 =~=~=~=~=~=~=~=~=~=~=~=


    Starting Microloader ASM built on Mar 28 2016 18:15:49...
    Initializing PLLs...
    Initializing Clocks..
    Initializing DDR PLLs/Clocks...
    Initializing DDR controller...
    Initializing data section...
    Initializing stack ptr...
    Switching to 'C' code...
    Starting Microloader C...
    Chip: KRONOS
    Found Internal MYSTI110 PHY on GMAC0
    Checking for Guide button press ...
    GCS in ISA MODE
    GCS: SFC DEVICE SETUP COMPLETE
    BOX MAC OK!
    BOX: Type: TRINITY V2 Rev: 7530C100
    Setting up default ATAG list...
    Jumping to U-Boot ...
    BOOT_TIME: 578 ms since POR
    --------------------------------------------------------------------------------
    | U-Boot 2009.08-00068-g69a4049 (Dec 22 2015 - 18:30:54)               CST HDx |
    |------------------------------------------------------------------------------|
    | Chipset information                                                          |
    | Vendor: Entropic  Type: KRONOS           Revision: B0        Fuses: 00010001 |
    |------------------------------------------------------------------------------|
    | Clock information                                                            |
    | *** not available yet ***                                                    |
    |------------------------------------------------------------------------------|
    | Frontpanel information                                                       |
    | Vendor: CST       Version: 5.1           Display: none                       |
    |------------------------------------------------------------------------------|
    | Memory configuration                                                         |
    | Start    | End      | Type    | Description                                  |
    |----------+----------+---------+----------------------------------------------|
    | 00000000 | 1FFFFFFF | RAM     | System main memory bank #0 (512M)            |
    | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
      00000000*| 07FFFFFF*| NAND    | Toshiba NAND 128MiB 3,3V 8-bit               |
    |------------------------------------------------------------------------------|
    | Network configuration                                                        |
    | MAC: LIP 6300                    address: 00-xx-xx-xx-xx-xx                  |
    --------------------------------------------------------------------------------

    Hit any key to stop autoboot:  3  2  1  0

    SFC read: offset 0x100000, size 0x300000
      0%  0%  0%  0%  0%  0%  0%  0%  1%  1%  1%  1%  1%  1%  1%  1%  2%  2%  2%  2%  2%  2%  2%  2%  3%  3%  3%  3%  3%  3%  3%  4%  4%  4%  4%  4%  4%  4%  4%  5%  5%  5%  5%  5%  5%  5%  5%  6%  6%  6%  6%  6%  6%  6%  7%  7%  7%  7%  7%  7%  7%  7%  8%  8%  8%  8%  8%  8%  8%  8%  9%  9%  9%  9%  9%  9%  9% 10% 10% 10% 10% 10% 10% 10% 10% 11% 11% 11% 11% 11% 11% 11% 11% 12% 12% 12% 12% 12% 12% 12% 13% 13% 13% 13% 13% 13% 13% 13% 14% 14% 14% 14% 14% 14% 14% 14% 15% 15% 15% 15% 15% 15% 15% 15% 16% 16% 16% 16% 16% 16% 16% 17% 17% 17% 17% 17% 17% 17% 17% 18% 18% 18% 18% 18% 18% 18% 18% 19% 19% 19% 19% 19% 19% 19% 20% 20% 20% 20% 20% 20% 20% 20% 21% 21% 21% 21% 21% 21% 21% 21% 22% 22% 22% 22% 22% 22% 22% 23% 23% 23% 23% 23% 23% 23% 23% 24% 24% 24% 24% 24% 24% 24% 24% 25% 25% 25% 25% 25% 25% 25% 26% 26% 26% 26% 26% 26% 26% 26% 27% 27% 27% 27% 27% 27% 27% 27% 28% 28% 28% 28% 28% 28% 28% 29% 29% 29% 29% 29% 29% 29% 29% 30% 30% 30% 30% 30% 30% 30% 30% 31% 31% 31% 31% 31% 31% 31% 31% 32% 32% 32% 32% 32% 32% 32% 33% 33% 33% 33% 33% 33% 33% 33% 34% 34% 34% 34% 34% 34% 34% 34% 35% 35% 35% 35% 35% 35% 35% 36% 36% 36% 36% 36% 36% 36% 36% 37% 37% 37% 37% 37% 37% 37% 37% 38% 38% 38% 38% 38% 38% 38% 39% 39% 39% 39% 39% 39% 39% 39% 40% 40% 40% 40% 40% 40% 40% 40% 41% 41% 41% 41% 41% 41% 41% 42% 42% 42% 42% 42% 42% 42% 42% 43% 43% 43% 43% 43% 43% 43% 43% 44% 44% 44% 44% 44% 44% 44% 45% 45% 45% 45% 45% 45% 45% 45% 46% 46% 46% 46% 46% 46% 46% 46% 47% 47% 47% 47% 47% 47% 47% 47% 48% 48% 48% 48% 48% 48% 48% 49% 49% 49% 49% 49% 49% 49% 49% 50% 50% 50% 50% 50% 50% 50% 50% 51% 51% 51% 51% 51% 51% 51% 52% 52% 52% 52% 52% 52% 52% 52% 53% 53% 53% 53% 53% 53% 53% 53% 54% 54% 54% 54% 54% 54% 54% 55% 55% 55% 55% 55% 55% 55% 55% 56% 56% 56% 56% 56% 56% 56% 56% 57% 57% 57% 57% 57% 57% 57% 58% 58% 58% 58% 58% 58% 58% 58% 59% 59% 59% 59% 59% 59% 59% 59% 60% 60% 60% 60% 60% 60% 60% 61% 61% 61% 61% 61% 61% 61% 61% 62% 62% 62% 62% 62% 62% 62% 62% 63% 63% 63% 63% 63% 63% 63% 63% 64% 64% 64% 64% 64% 64% 64% 65% 65% 65% 65% 65% 65% 65% 65% 66% 66% 66% 66% 66% 66% 66% 66% 67% 67% 67% 67% 67% 67% 67% 68% 68% 68% 68% 68% 68% 68% 68% 69% 69% 69% 69% 69% 69% 69% 69% 70% 70% 70% 70% 70% 70% 70% 71% 71% 71% 71% 71% 71% 71% 71% 72% 72% 72% 72% 72% 72% 72% 72% 73% 73% 73% 73% 73% 73% 73% 74% 74% 74% 74% 74% 74% 74% 74% 75% 75% 75% 75% 75% 75% 75% 75% 76% 76% 76% 76% 76% 76% 76% 77% 77% 77% 77% 77% 77% 77% 77% 78% 78% 78% 78% 78% 78% 78% 78% 79% 79% 79% 79% 79% 79% 79% 79% 80% 80% 80% 80% 80% 80% 80% 81% 81% 81% 81% 81% 81% 81% 81% 82% 82% 82% 82% 82% 82% 82% 82% 83% 83% 83% 83% 83% 83% 83% 84% 84% 84% 84% 84% 84% 84% 84% 85% 85% 85% 85% 85% 85% 85% 85% 86% 86% 86% 86% 86% 86% 86% 87% 87% 87% 87% 87% 87% 87% 87% 88% 88% 88% 88% 88% 88% 88% 88% 89% 89% 89% 89% 89% 89% 89% 90% 90% 90% 90% 90% 90% 90% 90% 91% 91% 91% 91% 91% 91% 91% 91% 92% 92% 92% 92% 92% 92% 92% 93% 93% 93% 93% 93% 93% 93% 93% 94% 94% 94% 94% 94% 94% 94% 94% 95% 95% 95% 95% 95% 95% 95% 95% 96% 96% 96% 96% 96% 96% 96% 97% 97% 97% 97% 97% 97% 97% 97% 98% 98% 98% 98% 98% 98% 98% 98% 99% 99% 99% 99% 99% 99% 99% 3145728 bytes read: OK
    ## Booting kernel from Legacy Image at 01000000 ...
       Image Name:   Coolstream Kernel (compressed)
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    2981377 Bytes =  2.8 MB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
    Uncompressing Linux... done, booting the kernel.
    [    0.000000] Booting Linux on physical CPU 0x0

    [    0.000000] Initializing cgroup subsys cpuset

    [    0.000000] Linux version 3.10.93 (image@server) (gcc version 6.3.1 20170109 (crosstool-NG 1) ) #1 SMP Sun Apr 15 15:27:43 CEST 2018

    [    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d

    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

    [    0.000000] Machine: Entropic Kronos STB Platform with FDT, model: CoolStream HD2 Kronos STB

    [    0.000000] Memory policy: ECC disabled, Data cache writealloc

    [    0.000000] Early platform io descriptors mapping...

    [    0.000000] PERCPU: Embedded 7 pages/cpu @80da8000 s5952 r8192 d14528 u32768

    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048

    [    0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:56m@0k(root0),16m@56m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw

    [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

    [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

    [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

    [    0.000000] Memory: 512MB = 512MB total

    [    0.000000] Memory: 247144k/247144k available, 277144k reserved, 0K highmem

    [    0.000000] Virtual kernel memory layout:

    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    [    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)

    [    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)

    [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)

    [    0.000000]       .text : 0x80008000 - 0x806584f8   (6466 kB)

    [    0.000000]       .init : 0x80659000 - 0x80687740   ( 186 kB)

    [    0.000000]       .data : 0x80688000 - 0x806c8e60   ( 260 kB)

    [    0.000000]        .bss : 0x806c8e60 - 0x806e3224   ( 105 kB)

    [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

    [    0.000000] Hierarchical RCU implementation.

    [    0.000000] RCU debugfs-based tracing is enabled.

    [    0.000000] Additional per-CPU info printed with stalls.

    [    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.

    [    0.000000] NR_IRQS:350

    [    0.000000] GIC CPU mask not found - kernel will fail to boot.

    [    0.000000] GIC CPU mask not found - kernel will fail to boot.

    [    0.000000] Cortex A9 frequency at 600 MHz

    [    0.000000] Initializing Cortex A9 Global Timer at Vir:0xFEA00200, using, at Freq:300 MHz

    [    0.000000] sched_clock: 32 bits at 300MHz, resolution 3ns, wraps every 14316ms

    [    0.000000] smp_twd: clock not found -2

    [    0.000000] Console: colour dummy device 80x30

    [    0.000000] console [ttyS0] enabled

    [    0.249695] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)

    [    0.292755] pid_max: default: 32768 minimum: 301

    [    0.297559] Mount-cache hash table entries: 512

    [    0.303989] CPU: Testing write buffer coherency: ok

    [    0.309083] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

    [    0.314710] Setting up static identity map for 0x803c47a0 - 0x803c47f8

    [    0.321237] L310 cache controller enabled

    [    0.325156] l2x0: 8 ways, CACHE_ID 0x410004c7, AUX_CTRL 0x32421001, Cache size: 131072 B

    [    0.333787] Brought up 1 CPUs

    [    0.336665] SMP: Total of 1 processors activated (1196.85 BogoMIPS).

    [    0.342986] CPU: All CPU(s) started in SVC mode.

    [    0.348247] devtmpfs: initialized

    [    0.356606] NET: Registered protocol family 16

    [    0.361718] DMA: preallocated 256 KiB pool for atomic coherent allocations

    [    0.475079] GMAC0: active interface is 1

    [    0.479064] ChipID=0x1000 ChipRevID=0x100

    [    0.483148] nx_dmac: Registered with 8 channels

    [    0.510003] bio: create slab <bio-0> at 0

    [    0.515385] GPIO: base febab000 (phys e06ab000)

    [    0.519984] GPIO: base feb69000 (phys e0669000)

    [    0.526345] SCSI subsystem initialized

    [    0.531490] usbcore: registered new interface driver usbfs

    [    0.537075] usbcore: registered new interface driver hub

    [    0.542740] usbcore: registered new device driver usb

    [    0.548178] pps_core: LinuxPPS API ver. 1 registered

    [    0.553106] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

    [    0.562389] PTP clock support registered

    [    0.567957] cfg80211: Calling CRDA to update world regulatory domain

    [    0.575764] Switching to clocksource arm_global_timer

    [    0.599683] NET: Registered protocol family 2

    [    0.604992] TCP established hash table entries: 4096 (order: 3, 32768 bytes)

    [    0.612071] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

    [    0.618484] TCP: Hash tables configured (established 4096 bind 4096)

    [    0.624837] TCP: reno registered

    [    0.627977] UDP hash table entries: 256 (order: 1, 8192 bytes)

    [    0.633826] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

    [    0.640322] NET: Registered protocol family 1

    [    0.645062] RPC: Registered named UNIX socket transport module.

    [    0.650912] RPC: Registered udp transport module.

    [    0.655546] RPC: Registered tcp transport module.

    [    0.660219] RPC: Registered tcp NFSv4.1 backchannel transport module.

    [    0.666768] PM: STB Platform power mgmt initialization.

    [    0.797804] NFS: Registering the id_resolver key type

    [    0.802858] Key type id_resolver registered

    [    0.806946] Key type id_legacy registered

    [    0.810974] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

    [    0.817338] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

    [    0.825289] msgmni has been set to 482

    [    0.830397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

    [    0.837682] io scheduler noop registered

    [    0.841630] io scheduler deadline registered

    [    0.846479] io scheduler cfq registered (default)

    [    0.851854] e06b2000.serial: ttyS0 at MMIO 0xe06b2000 (irq = 47) is a uart-ip3106

    [    0.866268] loop: module loaded

    [    0.870472] ahci-stb e0638000.sata: unable to find phy

    [    0.875523] SATA: Enable mpll_ss_en (rd_val=0x571185, wr_val=0x5711a5)

    [    0.882063] SATA: Enable rx_term_en0 (rd_val=0x277, wr_val=0x277)

    [    0.888081] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled

    [    0.895117] ahci-stb e0638000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode

    [    0.903903] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst

    [    0.913361] ata4294967295: SATA PHY offline

    [    0.918378] scsi0 : ahci_platform

    [    0.922514] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39

    [    0.932062] NAND device: Manufacturer ID: 0x98, Chip ID: 0xf1 (Toshiba NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64

    [    0.944487] Bad block table found at page 65472, version 0x01

    [    0.950954] Bad block table found at page 65408, version 0x01

    [    0.956998] nand_read_bbt: bad block at 0x000006000000

    [    0.962109] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand

    [    0.969041] Creating 3 MTD partitions on "e0631000.flash_nand":

    [    0.974932] 0x000000000000-0x000003800000 : "root0"

    [    0.981303] 0x000003800000-0x000004800000 : "var"

    [    0.987305] 0x000004800000-0x000008000000 : "root1"

    [    0.995499] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30

    [    1.001307] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)

    [    1.006876] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc

    [    1.013787] Creating 5 MTD partitions on "e0632000.flash_sfc":

    [    1.019573] 0x000000000000-0x000000040000 : "uldr"

    [    1.025926] 0x000000040000-0x0000000c0000 : "u-boot"

    [    1.032317] 0x0000000c0000-0x0000000e0000 : "env"

    [    1.038380] 0x0000000e0000-0x000000100000 : "spare"

    [    1.044959] 0x000000100000-0x000000400000 : "kernel"

    [    1.051792] tun: Universal TUN/TAP device driver, 1.6

    [    1.056744] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

    [    1.063493] DWMAC1000

    [    1.065766] stmmac - user ID: 0x36, Synopsys ID: 0x36

    [    1.070837]  Ring mode enabled

    [    1.073799]  DMA HW capability register supported

    [    1.078292]  Enhanced/Alternate descriptors

    [    1.082652] Enabled extended descriptors

    [    1.086587]  RX Checksum Offload Engine supported (type 2)

    [    1.092054]  TX Checksum insertion supported

    [    1.096262]  Wake-Up On Lan supported

    [    1.099934]  Enable RX Mitigation via HW Watchdog Timer

    [    1.119806] libphy: stmmac: probed

    [    1.123198] eth0: PHY ID 0293c412 at 0 IRQ POLL (stmmac-0:00) active

    [    1.129445] eth0: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)

    [    1.135164] eth0: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)

    [    1.140858] eth0: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)

    [    1.146552] eth0: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)

    [    1.152260] eth0: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)

    [    1.157956] eth0: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)

    [    1.163669] eth0: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)

    [    1.169361] eth0: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)

    [    1.175070] eth0: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)

    [    1.180771] eth0: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)

    [    1.186554] eth0: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)

    [    1.192349] eth0: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)

    [    1.198132] eth0: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)

    [    1.203927] eth0: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)

    [    1.209709] eth0: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)

    [    1.215504] eth0: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)

    [    1.221293] eth0: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)

    [    1.227076] eth0: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)

    [    1.232871] eth0: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)

    [    1.238654] eth0: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)

    [    1.244448] eth0: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)

    [    1.250235] eth0: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)

    [    1.256019] eth0: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)

    [    1.261814] eth0: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)

    [    1.267597] eth0: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)

    [    1.273392] eth0: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)

    [    1.279175] eth0: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)

    [    1.284969] eth0: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)

    [    1.290757] eth0: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)

    [    1.296541] eth0: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)

    [    1.302335] eth0: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)

    [    1.308378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

    [    1.314992] ehci-platform: EHCI generic platform driver

    [    1.320242] ehci-platform e066c000.usb: EHCI Host Controller

    [    1.325817] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1

    [    1.333728] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000

    [    1.350096] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00

    [    1.356243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

    [    1.362963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [    1.370115] usb usb1: Product: EHCI Host Controller

    [    1.374934] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd

    [    1.380391] usb usb1: SerialNumber: e066c000.usb

    [    1.385840] hub 1-0:1.0: USB hub found

    [    1.389516] hub 1-0:1.0: 1 port detected

    [    1.393660] ehci-platform e066d000.usb: EHCI Host Controller

    [    1.399238] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2

    [    1.407158] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000

    [    1.413269] ata1: SATA PHY offline

    [    1.416591] ata1: SATA link down (SStatus 0 SControl 300)

    [    1.430081] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00

    [    1.436234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

    [    1.442948] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

    [    1.450102] usb usb2: Product: EHCI Host Controller

    [    1.454923] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd

    [    1.460376] usb usb2: SerialNumber: e066d000.usb

    [    1.465770] hub 2-0:1.0: USB hub found

    [    1.469445] hub 2-0:1.0: 1 port detected

    [    1.474034] usbcore: registered new interface driver usb-storage

    [    1.480432] usbcore: registered new interface driver usbserial

    [    1.487749] usbcore: registered new interface driver usbhid

    [    1.493292] usbhid: USB HID core driver

    [    1.497285] TCP: cubic registered

    [    1.500526] NET: Registered protocol family 17

    [    1.505348] Key type dns_resolver registered

    [    1.509630] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 3

    [    1.517172] ThumbEE CPU extension supported.

    [    1.522464] ### dt-test ### No testcase data in device tree; not running tests

    [    2.521004] VFS: Mounted root (jffs2 filesystem) on device 31:0.

    [    2.527856] devtmpfs: mounted

    [    2.531050] Freeing unused kernel memory: 184K (80659000 - 80687000)


    init started: BusyBox v1.32.0 (2020-07-07 18:49:13 CEST)
    [    3.389287] NET: Registered protocol family 10

    try to mount /dev/mtdblock1 to /var
    starting /etc/init.d/S02loadmodules ...
    Sat Jan  1 00:00:00 CET 2000
    Creating device node for cs_display
    Running insmod now .......
    insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device
    Driver modules loaded, please start the app now...
    rootdir=/dev
    table=<stdin>
    Creating device node for KAL
    Creating device node for notifyq
    Creating device node for platform
    Creating device node for content
    Creating device node for standby
    Creating device node for video
    Creating device node for audio
    Creating device node for pvr
    Creating device node for cs_control
    Creating device node for cs_ir
    Creating device node for fb
    starting /etc/init.d/S04mdev ...
    starting /etc/init.d/S05mount ...
    starting /etc/init.d/S50hostname ...
    starting /etc/init.d/S51networking ...
    Configuring network interfaces... Starting wlan0
    Failed to connect to wpa_supplicant - wpa_ctrl_open: Success
    Could not read interface wlan0 flags: No such device
    Failed to initialize driver interface
    done.
    [logoview] done with Timeout...
    starting /etc/init.d/S52syslogd ...
    starting /etc/init.d/S60autofs ...
    Jan  1 00:00:13 CST-Trinity-Duo syslog.info syslogd started: BusyBox v1.32.0
     1 Jan 00:00:13 ntpdate[1017]: ntpdate 4.2.8p6@1.3265-o (1)
    starting
    starting /etc/init.d/S80dvdreadfs ...
    starting /etc/init.d/S90inetd ...
    starting /etc/init.d/S96nfsd ...
    starting /var/etc/init.d/S9T_tuxcald ...
    starting /var/etc/init.d/S9T_tuxmaild ...
    Jan  1 00:00:14 CST-Trinity-Duo daemon.info : starting pid 1053, tty '': '/etc/init.d/start_neutrino'

    Please press Enter to activate this console. /var/plugins/operations camd_init
    /var/plugins/operations cardserver_start
    /var/plugins/operations camd_start
    /var/plugins/operations rezap
    11 Mar 23:41:56 ntpdate[1017]: step time server 130.133.1.10 offset 668821300.986597 sec
    [ConfigFile] Unable to open file /share/tuxbox/neutrino/themes/.theme for reading.
    [frontend.cpp:Open:304] /dev/dvb/adapter0/frontend2: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter0/frontend3: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend0: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend1: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend2: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter1/frontend3: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend0: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend1: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend2: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter2/frontend3: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend0: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend1: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend2: No such file or directory
    [frontend.cpp:Open:304] /dev/dvb/adapter3/frontend3: No such file or directory
    /tmp/camd.socket: No such file or directory
    2021-03-11 23:42:03.791 [sectionsd] start
    2021-03-11 23:42:03.838 [sectionsd] starting
    2021-03-11 23:42:03.873 [sectionsd] timeThread::run:: starting, pid 1086 (1701115056)
    2021-03-11 23:42:03.881 [sectionsd] eitThread::run:: starting, pid 1086 (1699017904)
    2021-03-11 23:42:03.890 [sectionsd] cnThread::run:: starting, pid 1086 (1696920752)
    2021-03-11 23:42:03.911 [sectionsd] freeSatThread::run:: starting, pid 1086 (1694823600)
    2021-03-11 23:42:03.926 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1)
    [ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading.
    2021-03-11 23:42:04.480 [sectionsd] timeThread: get DVB time ch 0x000000000000 rc: 8 neutrino_sets_time 0
    2021-03-11 23:42:04.496 [sectionsd] SIsectionTIME::parse: TDT time: Thu Mar 11 23:42:03 2021
    2021-03-11 23:42:04.500 [sectionsd] timeThread: timediff -1500195, current: 11.03.2021 23:42:04, dvb: Thu Mar 11 23:42:03 2021

    2021-03-11 23:42:03.000 2021-03-11 23:42:03.005 2021-03-11 23:42:03.005 2021-03-11 23:42:03.005 [sectionsd] timeThread: Time set via DVB (TDT), going to sleep for 5 seconds.
    [sectionsd] cnThread::run:: time set: Thu Mar 11 23:42:03 2021

    [sectionsd] eitThread::run:: time set: Thu Mar 11 23:42:03 2021

    [sectionsd] freeSatThread::run:: time set: Thu Mar 11 23:42:03 2021

    2021-03-11 23:42:03.026 [sectionsd] commandserviceStopped
    2021-03-11 23:42:03.094 2021-03-11 23:42:03.095 [sectionsd] cnThread::shouldSleep first retry (1) -> restart demux
    [sectionsd] cnThread: stop eit update filter (not active)
    2021-03-11 23:42:03.108 [sectionsd] commandserviceStopped done
    2021-03-11 23:42:03.146 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0
    sh: you need to specify whom to kill
    2021-03-11 23:42:03.327 [sectionsd] addEvent: ch 03fb0001283d running 1 (next) got_CN 0
    /tmp/camd.socket: No such file or directory
    2021-03-11 23:42:03.427 [sectionsd] timeThread: get DVB time ch 0x03fb0001283d (isOpen 1)
    2021-03-11 23:42:03.465 [sectionsd] timeThread: get DVB time ch 0x03fb0001283d rc: 29 neutrino_sets_time 0
    2021-03-11 23:42:03.480 [sectionsd] SIsectionTIME::parse: TOT time: Thu Mar 11 23:42:03 2021
    2021-03-11 23:42:03.496 [sectionsd] timeThread: timediff -496578, current: 11.03.2021 23:42:03, dvb: Thu Mar 11 23:42:03 2021

    2021-03-11 23:42:03.502 [sectionsd] difference is < 120s, using adjtime(0, -496578). oldd(0, 0)
    2021-03-11 23:42:03.522 [sectionsd] timeThread: Time set via DVB (TOT), going to sleep for 1800 seconds.
    2021-03-11 23:42:03.905 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0
    2021-03-11 23:42:03.945 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0
    2021-03-11 23:42:04.035 [sectionsd] addEvent: ch 03fb0001283d running 4 (curr) got_CN 2
    2021-03-11 23:42:06.287 [sectionsd] cnThread: eit update filter, ch 0x03fb0001283d, current ver 0x04  got events 3 (not active)
    [operations] rezap...
    2021-03-11 23:42:12.721 [sectionsd] commandserviceChanged: Service change to b45c03fb0001283d demux #0
    /tmp/camd.socket: No such file or directory
    2021-03-11 23:42:31.461 [sectionsd] eitThread::StopRun: to lock
    2021-03-11 23:42:31.751 [sectionsd] eitThread::StopRun: to closefd
    2021-03-11 23:42:31.754 [sectionsd] eitThread::StopRun: to unlock
    2021-03-11 23:42:31.760 [sectionsd] cnThread::StopRun: to lock
    2021-03-11 23:42:31.766 [sectionsd] cnThread::StopRun: to closefd
    2021-03-11 23:42:31.771 [sectionsd] cnThread::StopRun: to unlock
    2021-03-11 23:42:31.778 [sectionsd] timeThread::StopRun: to lock
    2021-03-11 23:42:31.783 [sectionsd] timeThread::StopRun: to closefd
    2021-03-11 23:42:31.789 [sectionsd] timeThread::StopRun: to unlock
    2021-03-11 23:42:31.795 [sectionsd] freeSatThread::StopRun: to lock
    2021-03-11 23:42:31.803 [sectionsd] freeSatThread::StopRun: to closefd
    2021-03-11 23:42:31.807 [sectionsd] freeSatThread::StopRun: to unlock
    2021-03-11 23:42:31.814 [sectionsd] broadcasting...
    2021-03-11 23:42:31.819 [sectionsd] pausing...
    2021-03-11 23:42:31.824 [sectionsd] join Housekeeping
    2021-03-11 23:42:31.829 [sectionsd] join TOT
    2021-03-11 23:42:31.833 [sectionsd] timeThread::Stop: to broadcast
    2021-03-11 23:42:31.838 [sectionsd] timeThread::Stop: to join
    2021-03-11 23:42:31.845 [sectionsd] timeThread::Stop: to close
    2021-03-11 23:42:31.849 [sectionsd] join EIT
    2021-03-11 23:42:31.854 [sectionsd] eitThread::Stop: to broadcast
    2021-03-11 23:42:31.859 [sectionsd] eitThread::Stop: to join
    2021-03-11 23:42:31.865 [sectionsd] eitThread::Stop: to close
    2021-03-11 23:42:31.870 [sectionsd] join CN
    2021-03-11 23:42:31.875 [sectionsd] cnThread::Stop: to broadcast
    2021-03-11 23:42:31.879 [sectionsd] cnThread: stop eit update filter (active)
    2021-03-11 23:42:31.886 [sectionsd] cnThread::Stop: to join
    2021-03-11 23:42:31.902 [sectionsd] cnThread::Stop: to close
    2021-03-11 23:42:31.904 [sectionsd] join FSEIT
    2021-03-11 23:42:31.909 [sectionsd] freeSatThread::Stop: to broadcast
    2021-03-11 23:42:31.914 [sectionsd] freeSatThread::Stop: to join
    2021-03-11 23:42:31.921 [sectionsd] freeSatThread::Stop: to close
    2021-03-11 23:42:31.926 [sectionsd] stopped
    Neutrino exited with exit code 1
    calling 'shutdown_helper 0
    64
    5'
    now: 26925042, timer 0, FP timer 0min

     

     

    Vielen Dank für die Hilfe!

     

    • Thanks 1

  2. CST TRINITY DUO Emergency Flash gesucht !

    in Allgemein

    Geschrieben

    vor 12 Stunden schrieb Don de Deckelwech:

    Hi,

    da sind die Bootargs verbogen, da kann man mit den normalen Methoden nix mehr machen. Aber damals im Bluepeer-Forum hat ein selbst davon Betroffener rausgefunden, wie man das wieder hinbiegt. Ich weiss grad nicht, ob es die Anleitung auch hier in der Keywelt gibt, deshalb hier ein Link ins NI-Forum:

     

      Unsichtbaren Inhalt anzeigen

    https://www.neutrino-images.de/board/viewtopic.php?f=48&t=29

     

     

    Bitte zuerst die I. Methode versuchen und die Befehle dort nicht abtippen, sondern per Copy&Paste einfügen.

     

    Wenn du Fragen hast, stelle sie bitte vorher, bevor du ausversehen was falsch machst.

     

    Das wird schon... ;)

     

    Ciao,

    DdD.

     

    Danke!

    Ich werde es Heute zum Abend ausprobieren.

    Dann gibt es einen Ergebnisbericht!

     

  3. CST TRINITY DUO Emergency Flash gesucht !

    in Allgemein

    Geschrieben

    Ich habe einige Logs nachzureichen.

    Vielleicht kann ja jemand daraus die Ursache erkennen.

    Spoiler

    normales bootlog:

    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.10 09:53:43 =~=~=~=~=~=~=~=~=~=~=~=


    Starting Microloader ASM built on Mar 28 2016 18:03:24...
    Initializing PLLs...
    Initializing Clocks..
    Initializing DDR PLLs/Clocks...
    Initializing DDR controller...
    Initializing data section...
    Initializing stack ptr...
    Switching to 'C' code...
    Starting Microloader C...
    Chip: KRONOS
    Found Internal MYSTI110 PHY on GMAC0
    Checking for Guide button press ...
    GCS in ISA MODE
    GCS: SFC DEVICE SETUP COMPLETE
    BOX MAC OK!
    BOX: Type: TRINITY V2 Rev: 7530C100
    Setting up default ATAG list...
    Jumping to U-Boot ...
    BOOT_TIME: 579 ms since POR
    --------------------------------------------------------------------------------
    | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59)               CST HDx |
    |------------------------------------------------------------------------------|
    | Chipset information                                                          |
    | Vendor: Entropic  Type: KRONOS           Revision: B0        Fuses: 00010001 |
    |------------------------------------------------------------------------------|
    | Clock information                                                            |
    | *** not available yet ***                                                    |
    |------------------------------------------------------------------------------|
    | Frontpanel information                                                       |
    | Vendor: CST       Version: 5.1           Display: none                       |
    |------------------------------------------------------------------------------|
    | Memory configuration                                                         |
    | Start    | End      | Type    | Description                                  |
    |----------+----------+---------+----------------------------------------------|
    | 00000000 | 1FFFFFFF | RAM     | System main memory bank #0 (512M)            |
    | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
        *** Warning - bad CRC or SFC, using default environment
    | 00000000*| 07FFFFFF*| NAND    | Toshiba NAND 128MiB 3,3V 8-bit               |
    |------------------------------------------------------------------------------|
    | Network configuration                                                        |
    | MAC: LIP 6300                    address: 00-xx-xx-xx-xx-xx                  |
    --------------------------------------------------------------------------------

    Hit any key to stop autoboot:   0

    SFC read: e0631000.flash_nand: partitioning exceeds flash size
    'kernel' is not a number
    Wrong Image Format for bootm command
    ERROR: can't get kernel image!
    CST HD2 #

     

     

    und ein Log vom Flashen per USB-Stick:

     

    Spoiler

    emergecy flash bootlog:

     

    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.10 10:17:43 =~=~=~=~=~=~=~=~=~=~=~=


    Starting Microloader ASM built on Mar 28 2016 18:03:24...
    Initializing PLLs...
    Initializing Clocks..
    Initializing DDR PLLs/Clocks...
    Initializing DDR controller...
    Initializing data section...
    Initializing stack ptr...
    Switching to 'C' code...
    Starting Microloader C...
    Chip: KRONOS
    Found Internal MYSTI110 PHY on GMAC0
    Checking for Guide button press ...
    GCS in ISA MODE
    GCS: SFC DEVICE SETUP COMPLETE
    BOX MAC OK!
    BOX: Type: TRINITY V2 Rev: 7530C100
    Setting up default ATAG list...
    Jumping to U-Boot ...
    BOOT_TIME: 579 ms since POR
    --------------------------------------------------------------------------------
    | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59)               CST HDx |
    |------------------------------------------------------------------------------|
    | Chipset information                                                          |
    | Vendor: Entropic  Type: KRONOS           Revision: B0        Fuses: 00010001 |
    |------------------------------------------------------------------------------|
    | Clock information                                                            |
    | *** not available yet ***                                                    |
    |------------------------------------------------------------------------------|
    | Frontpanel information                                                       |
    | Vendor: CST       Version: 5.1           Display: none                       |
    |------------------------------------------------------------------------------|
    | Memory configuration                                                         |
    | Start    | End      | Type    | Description                                  |
    |----------+----------+---------+----------------------------------------------|
    | 00000000 | 1FFFFFFF | RAM     | System main memory bank #0 (512M)            |
    | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
        *** Warning - bad CRC or SFC, using default environment
    | 00000000*| 07FFFFFF*| NAND    | Toshiba NAND 128MiB 3,3V 8-bit               |
    |------------------------------------------------------------------------------|
    | Network configuration                                                        |
    | MAC: LIP 6300                    address: 00-xx-xx-xx-xx-xx                  |
    --------------------------------------------------------------------------------

    Hit any key to stop autoboot:   1
    Emergency update from usb
    (Re)start USB...
    USB:   Register 10011 NbrPorts 1
    USB EHCI 1.00
    scanning bus for devices... 2 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
    reading uldr.bin

    50072 bytes read

    SFC erase: e0631000.flash_nand: partitioning exceeds flash size
    'uldr' is not a number
    ** Error erasing SFC for uldr **
    reading u-boot.bin

    348380 bytes read

    SFC erase: e0631000.flash_nand: partitioning exceeds flash size
    'u-boot' is not a number
    ** Error erasing SFC for u-boot **
    reading env.bin

    0 bytes read

    SFC erase: e0631000.flash_nand: partitioning exceeds flash size
    'env' is not a number
    ** Error erasing SFC for env **
    reading vmlinux.ub.gz

    2946021 bytes read

    SFC erase: e0631000.flash_nand: partitioning exceeds flash size
    'kernel' is not a number
    ** Error erasing SFC for vmlinux.ub.gz **
    reading rootfs.arm.jffs2.nand

    38902024 bytes read

    NAND erase: e0631000.flash_nand: partitioning exceeds flash size
    'root0' is not a number
    ** Error erasing NAND for rootfs.arm.jffs2.nand **
    reading rootfs1.arm.jffs2.nand

    ** Unable to read "rootfs1.arm.jffs2.nand" from usb 0:1 **
    ** Skipping rootfs1.arm.jffs2.nand **
    reading var.arm.jffs2.nand

    ** Unable to read "var.arm.jffs2.nand" from usb 0:1 **
    ** Skipping var.arm.jffs2.nand **
    resetting ...


    Starting Microloader ASM built on Mar 28 2016 18:03:24...
    Initializing PLLs...
    Initializing Clocks..
    Initializing DDR PLLs/Clocks...
    Initializing DDR controller...
    Initializing data section...
    Initializing stack ptr...
    Switching to 'C' code...
    Starting Microloader C...
    Chip: KRONOS
    Found Internal MYSTI110 PHY on GMAC0
    Checking for Guide button press ...
    GCS in ISA MODE
    GCS: SFC DEVICE SETUP COMPLETE
    BOX MAC OK!
    BOX: Type: TRINITY V2 Rev: 7530C100
    Setting up default ATAG list...
    Jumping to U-Boot ...
    BOOT_TIME: 577 ms since POR
    --------------------------------------------------------------------------------
    | U-Boot 2009.08-00068-g69a4049 (Dec 10 2015 - 14:51:59)               CST HDx |
    |------------------------------------------------------------------------------|
    | Chipset information                                                          |
    | Vendor: Entropic  Type: KRONOS           Revision: B0        Fuses: 00010001 |
    |------------------------------------------------------------------------------|
    | Clock information                                                            |
    | *** not available yet ***                                                    |
    |------------------------------------------------------------------------------|
    | Frontpanel information                                                       |
    | Vendor: CST       Version: 5.1           Display: none                       |
    |------------------------------------------------------------------------------|
    | Memory configuration                                                         |
    | Start    | End      | Type    | Description                                  |
    |----------+----------+---------+----------------------------------------------|
    | 00000000 | 1FFFFFFF | RAM     | System main memory bank #0 (512M)            |
    | D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
        *** Warning - bad CRC or SFC, using default environment
    | 00000000*| 07FFFFFF*| NAND    | Toshiba NAND 128MiB 3,3V 8-bit               |
    |------------------------------------------------------------------------------|
    | Network configuration                                                        |
    | MAC: LIP 6300                    address: 00-xx-xx-xx-xx-xx                  |
    --------------------------------------------------------------------------------

    Hit any key to stop autoboot:  0

    SFC read: e0631000.flash_nand: partitioning exceeds flash size
    'kernel' is not a number
    Wrong Image Format for bootm command
    ERROR: can't get kernel image!
    CST HD2 #

     

     

    Ist da eventuell der Flashspeicher defekt?

     

  4. CST TRINITY DUO Emergency Flash gesucht !

    in Allgemein

    Geschrieben

    vor 3 Stunden schrieb Gandalf:

    Klar fehlt da was, denn ein Image wird auch gebraucht......

     

    Umbenennen in rootfs.arm.jffs2.nand und auf den Stick kopieren.

     

    Mit ein wenig Eigeninitiative findet sich alles.

     

     

    1353908612_CST_302_Beta_LinkTrinityDUO.rar 34 MB · 0 downloads

     

    Danke für die Hilfe!

     

    Genau so habe ich es getan.

    Leider funktioniert es nicht.

    Der Flashprozess scheint auch zu starten, die LED am USB-Stick blinkt für ca. 5 Sekunden heftig, dann geht sie aus. Die LED an der Box leuchtet dabei manchmal rot, bei einem erneuten Versuch wieder gelb/rot. Nachdem die LED am USB-Stick erloschen ist, blinkt die LED der Box zweimal grün und geht dann aus.

    Anscheinend ist da noch mehr defekt.

    Ich werde jetzt mittels Nullmodemkabel versuchen, den Fehler weiter einzugrenzen.

     

×
×
  • Neu erstellen...