oberfish

okay, das wirds wohl sein. bei eingabe des befehls mtest raucht die hütte sofort ab: dbox2-ppcboot> mtest Writing: 00000000, debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoM IPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID 01-74.5a.19.07.00.00-80 debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.104, My IP 192.168.1.123 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash will verify ELF image, start= 0x800000, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-1d-a9-5c FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.1.104; our IP address is 192.168.1.123 Filename 'C/Programme/tftpboot/logo-lcd'. Load address: 0x130000 Loading: ## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.1.104; our IP address is 192.168.1.123 Filename 'C/Programme/tftpboot/logo-fb'. Load address: 0x120000 Loading: ######### done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 BOOTP broadcast 1 TFTP from server 192.168.1.104; our IP address is 192.168.1.123 Filename 'C/Programme/tftpboot/kernel-cdk'. Load address: 0x100000 Loading: * Abort dbox2-ppcboot>

diese infos hab ich der box noch entlocken können: => bootp 120000 /C/dbox2/neutrino-cramfs2x.img BOOTP broadcast 1 DHCP client bound to address 192.168.1.135 Using SCC ETHERNET device TFTP from server 192.168.1.1; our IP address is 192.168.1.135 Filename '/C/dbox2/neutrino-cramfs2x.img'. Load address: 0x120000 Loading: => BOOTP broadcast 1 DHCP client bound to address 192.168.1.135 Using SCC ETHERNET device TFTP from server 192.168.1.1; our IP address is 192.168.1.135 Filename '/C/dbox2/neutrino-cramfs2x.img'. Load address: 0x120000 Loading: => boot ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 666401 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00120000 ... Bad Magic Number => ls entry is .version entry is ROOT_NOVEMBER_V1 entry is bin entry is dev entry is etc entry is lib entry is mnt entry is proc entry is root entry is sbin entry is share entry is tmp entry is var entry is vmlinuz 14 directory entries => rm -r * Unknown command 'rm' - try 'help' => help ? - alias for 'help' autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation dhcp - invoke DHCP client to obtain IP/boot params echo - echo args to console erase - erase FLASH memory flinfo - print FLASH memory information fsinfo - print information about filesystems fsload - load binary file from a filesystem image go - start application at address 'addr' help - print online help iminfo - print header information for application image imls - list all images found in flash itest - return true/false on integer compare loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loop - infinite loop on address range ls - list files in a directory (default /) md - memory display mm - memory modify (auto-incrementing) mtest - simple RAM test mw - memory write (fill) nfs - boot image via network using NFS protocol nm - memory modify (constant address) printenv- print environment variables protect - enable or disable FLASH write protection rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU run - run commands in an environment variable setenv - set environment variables sleep - delay execution for some time tftpboot- boot image via network using TFTP protocol version - print monitor version => bootd ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 666401 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00120000 ... Bad Magic Number => base Base Address: 0x00000000 => bdinfo memstart = 0x00000000 memsize = 0x02000000 flashstart = 0x10000000 flashsize = 0x00800000 flashoffset = 0x00000000 sramstart = 0x00000000 sramsize = 0x00000000 immr_base = 0xFF000000 bootflags = 0x00000001 intfreq = 67.200 MHz busfreq = 67.200 MHz ethaddr = 00:50:9C:xx:xx:xx IP addr = 192.168.1.135 baudrate = 9600 bps => flinfo Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit Size: 8192 kB in 71 Sectors Sector Start Addresses: 10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO) 10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO) 10020000 10040000 10060000 10080000 100A0000 100C0000 100E0000 10100000 10120000 10140000 10160000 10180000 101A0000 101C0000 101E0000 10200000 10220000 10240000 10260000 10280000 102A0000 102C0000 102E0000 10300000 10320000 10340000 10360000 10380000 103A0000 103C0000 103E0000 10400000 10420000 10440000 10460000 10480000 104A0000 104C0000 104E0000 10500000 10520000 10540000 10560000 10580000 105A0000 105C0000 105E0000 10600000 10620000 10640000 10660000 10680000 106A0000 106C0000 106E0000 10700000 10720000 10740000 10760000 10780000 107A0000 107C0000 107E0000 Bank # 2: missing or unknown FLASH type => fsload ### FS (squashfs) loading 'vmlinuz' to 0x100000 ### FS load complete: 666401 bytes loaded to 0x100000 => printenv bootcmd=setenv bootargs console=$(console) root=/dev/mtdblock1 rootfstype=squash fs; fsload; protect off 10020000 107fffff; bootm bootdelay=1 baudrate=9600 console=ttyS0 lcd_inverse=0 lcd_contrast=15 stdin=serial stdout=serial stderr=serial ethaddr=00:50:9c:xx:xx:xx ethact=SCC ETHERNET bootfile=/C/dbox2/neutrino-cramfs2x.img gatewayip=192.168.1.1 netmask=255.255.255.0 ipaddr=192.168.1.135 serverip=192.168.1.1 dnsip=213.191.74.18 bootargs=console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs Environment size: 500/16380 bytes => ver U-Boot 1.1.2 (Tuxbox) (Nov 12 2005 - 18:29:50) =>

geiler laden hier! thanx! F!

...beim versuch das image gleich nach dem flashen auszulesen kommt das hier: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID xxxxxxxxxxx debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.104, My IP 192.168.1.120 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_readflash will verify ELF image, start= 0x800000, size= 207138 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Sep 19 2001 - 20:10:10) Initializing... CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: XXXXXXXXXXX FLASH: 8 MB Input: serial Output: serial anykey druecken um flash auslesen abzubrech 0 BOOTP broadcast 1 Bootp from server 110.118.0.0; our IP address is 0.0.0.0 Sending Flash over UDP nochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoc hmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochma lnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalno chmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochm ...

habe die box nochmal mit dem aktuellen keywelt image geflashed. hier die logs: ***Adapter Desc: Intel® PRO/100+ Server Adapter (PILA8470B) (via IpHlpApi #0) ***MAC address: 00:30:48:41:14:0C Local IP: 192.168.1.104 ***BootP server started... Port 67 ***TFTP server started... Port 69 BootP> Request from Edit SnowHead: auch die MAC immer überschreiben! (assuming that this is DBox). BootP> Created dynamic ARP entry for DBoxIP 192.168.1.120 with MAC Edit SnowHead: auch die MAC immer überschreiben! BootP> Answer sent! TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\ppcboot_writeflash"... TFTP> Transfer finished, sent 394 blocks BootP> Created dynamic ARP entry for DBoxIP 192.168.1.120 with MAC Edit SnowHead: auch die MAC immer überschreiben! BootP> Answer sent! TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\logo-lcd" TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\logo-lcd"... TFTP> Transfer finished, sent 16 blocks BootP> Created dynamic ARP entry for DBoxIP 192.168.1.120 with MAC Edit SnowHead: auch die MAC immer überschreiben! BootP> Answer sent! TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\logo-fb" TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\logo-fb"... TFTP> Transfer finished, sent 85 blocks BootP> Created dynamic ARP entry for DBoxIP 192.168.1.120 with MAC Edit SnowHead: auch die MAC immer überschreiben! BootP> Answer sent! TFTP> Non-BootP TFTP-transfer requested "C:\dbox2\KEYWELT_V4_SEPTEMBER_2x_SQUASHFS_2005.img" TFTP> Started TFTP-Transfer for "C:\dbox2\KEYWELT_V4_SEPTEMBER_2x_SQUASHFS_2005.img"... TFTP> Transfer finished, sent 16129 blocks ****** debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID Edit SnowHead: dsID immer überschreiben! debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Got BOOTP reply from Server IP 192.168.1.104, My IP 192.168.1.120 debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash will verify ELF image, start= 0x800000, size= 201596 verify sig: 262 boot net: boot file has no valid signature Branching to 0x40000 ppcboot 0.6.4 (Apr 11 2002 - 16:10:44) Initializing... CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: ### No HW ID - assuming TQM8xxL DRAM: (faked) 32 MB Ethernet: 00-50-9c-1d-a9-5c FLASH: 8 MB LCD driver (KS0713) initialized BOOTP broadcast 1 TFTP from server 192.168.1.104; our IP address is 192.168.1.120 Filename 'C/Programme/tftpboot/logo-lcd'. Load address: 0x130000 Loading: ## done LCD logo at: 0x130000 (0x1F9FFC0 bytes) BOOTP broadcast 1 TFTP from server 192.168.1.104; our IP address is 192.168.1.120 Filename 'C/Programme/tftpboot/logo-fb'. Load address: 0x120000 Loading: ######### done FB logo at: 0x0 (0x1FC0000 bytes) AVIA Frambuffer Input: serial Output: serial 1: Console on ttyS0 2: Console on null 3: Console on framebuffer Select (1-3), other keys to stop autoboot: 0 dbox2-ppcboot> bootp 120000 /C/dbox2/KEYWELT_V4_SEPTEMBER_2x_SQUASHFS_2005.img BOOTP broadcast 1 TFTP from server 192.168.1.104; our IP address is 192.168.1.120 Filename '/C/dbox2/KEYWELT_V4_SEPTEMBER_2x_SQUASHFS_2005.img'. Load address: 0x120000 Loading: ####################################################################### ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ###################### done dbox2-ppcboot> protect off 10020000 107fffff ............................................................... Un-Protected 63 sectors dbox2-ppcboot> erase 10020000 107fffff Erase Flash from 0x10020000 to 0x107fffff sector 66 .... done Erased 63 sectors dbox2-ppcboot> cp.l 120000 10020000 1F8000 Copy to Flash... done dbox2-ppcboot> ist da irgendwas ersichtlich? gruss felix

hey snow, danke für die info. dann werd ich mal recherchieren, wie das funktioniert.

woow, cool so schnell viele hilfsbereite. tja forschung macht halt spass. okay, dies müsste das bootlog sein: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID Edit SnowHead: dsID immer überschreiben! debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x800000, size= 155528 verify sig: 263 Branching to 0x40000 U-Boot 1.1.2 (Tuxbox) (May 22 2005 - 04:33:29) CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ....... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load complete: 625303 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 625239 Bytes = 610.6 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID Edit SnowHead: dsID immer überschreiben! debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x800000, size= 155528 verify sig: 263 Branching to 0x40000 U-Boot 1.1.2 (Tuxbox) (May 22 2005 - 04:33:29) CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache *** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board: DBOX2, Nokia, BMon V1.0 Watchdog enabled I2C: ready DRAM: 32 MB FLASH: 8 MB Scanning JFFS2 FS: ....... done. FB: ready LCD: ready In: serial Out: serial Err: serial Net: SCC ETHERNET Options: 1: Console on null 2: Console on ttyS0 3: Console on framebuffer Select option (1-3), other keys to stop autoboot: 0 ### FS (jffs2) loading 'vmlinuz' to 0x100000 ### FS load complete: 625303 bytes loaded to 0x100000 ............................................................... Un-Protected 63 sectors ## Booting image at 00100000 ... Image Name: dbox2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 625239 Bytes = 610.6 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS debug: WATCHDOG RESET debug: BMon V1.0 mID 01 debug: feID 7a gtxID 0b debug: fpID 5a dsID Edit SnowHead: dsID immer überschreiben! debug: HWrev X5 SWrev 0.81 debug: B/Ex/Fl(MB) 32/00/08 WATCHDOG reset enabled dbox2:root> debug: BOOTP/TFTP bootstrap loader (v0.3) debug: debug: Transmitting BOOTP request via broadcast debug: Given up BOOTP/TFTP boot boot net failed Flash-FS bootstrap loader (v1.5) Found Flash-FS superblock version 3.1 Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS debug: Got Block #0032 will verify ELF image, start= 0x800000, size= 155528 verify sig: 263 Branching to ` usw. any ideas?

hallo, nun muss ich doch mal nen post loswerden nachdem ich alle anderen infos bereits hier gefunden habe. ich habe eine dbox2 nokia kabel 2 chip defekt gekauft die sich anscheinend auch schon im debug mode befindet. habe sie also mit dem aktuellen keywelt v4 image geflashed was auch geklappt hat, jedoch habe ich immer noch dasselbe problem: die box startet, zeigt kurz das betanova logo, dann die infos bmon v1.0 usw, dann das keywelt logoloading kernel und danach fängt sie wieder von vorne an. sieht so aus als ob da noch reste von dem betanova schrott drauf sind. hat jemand nen kurzen tip wie weiter verfahren sollte um das teil zum laufen zu bekkommen? jffs image und andere ältere images haben übrigens auch nichts gebracht. vielen dank, felix